Applications
-
Premium
Product Recovery Solutions for Chemicals
Efficient recovery of active pharmaceutical ingredients (APIs), chemical substances or food powders after drying applications such as spray and fluid bed drying is frequently a problem. The same problem occurs in many milling and micronization applications. The preferred way to recover these sensitive products is with cyclone collectors due to their direct powder capture. Unlike bag filters or wet scrubbers, cyclones minimize filter or product contamination and product cross contamination and can easily handle a ...
By Advanced Cyclone Systems, S. A. (ACS) based in Porto, PORTUGAL.
-
Premium
Chemiluminescense based analyzer for medical industry
Exhaled Nitric Oxide (FeNO) measurements are easy to perform and may be used to monitor eosinophilic airway inflammation (Asthma). A range of computerized pulmonary diagnostic products ranging from neonatology to adult pulmonary function testing are manufactured by ECO PHYSICS AG. These products are marketed and distributed by the label ECO ...
By ECO Physics AG based in Duernten, SWITZERLAND.
-
Premium
Identification of drugs and medicines
INTRODUCTION At present, pharmacology, being an integral part of medical science, shows rapid development resulting in the discovery of ever growing number of new drugs and medicines. Hence, quality control and identification of drugs acquires vital importance as the number of counterfeited products inconsistent with Pharmacopoeia concurrently increases with the introduction of new numerous drugs. Identification of the drugs is necessary to reject the products that not only lack the required medicinal properties ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Hyperbaric Oxygen Therapy for Sports
Hyperbaric Oxygen Therapy (HBOT) for professional sports has become one of the most effective methods for athlete ...
By OXYHELP INDUSTRY Srl based in Bucuresti, ROMANIA.
-
Premium
FT-NIR analysis for pharmaceutical raw material identification sector
Within the globalized pharmaceutical raw material supply chain, there is an increasing public health concern of raw material adulteration, contamination, or mislabeling, especially with recent incidents such as the adulteration of heparin. This has driven regulatory bodies to update their guidelines. Chapter 5.33 of the latest GMP guidelines for Medicinal Products for Human Use, provided by the European Commission (EC), entitled "Eudralex," specifies that "there should be appropriate procedures or measures to ...
By Galaxy Scientific Inc based in Nashua, NEW HAMPSHIRE (USA).
-
Premium
Determnation of albumin concentration in urine
INTRODUCTION The capillary electrophoresis method provides det ermination of albumin concentration in ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Parallel evaporation for the pharmaceutical industry
For quality control in pharmaceutical industry and in the development of new components ...
By BUCHI based in Flawil, SWITZERLAND.
-
Premium
Medical incinerators for ebola containment
Over the years, Inciner8 have been involved in the containment and control of some of the most infectious and destructive disease outbreaks of recent times. From Ebola in Liberia to SARS in South East Asia, we have been instrumental in the providing high temperature medical incinerators to safely destroy infected ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Large medical incinerators for hospital use
Hospital waste varies from site to site and the biggest challenge is to dispose of this wide range of waste streams using one solution. Incineration is still the preferred way to process Type I to Type IV waste without endangering the health of patients, staff or anyone else coming into contact with ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Industrial equipment solutions for special mobility areas
Industrial equipment solutions for special mobility ...
By Koller Maschinen- und Anlagenbau GmbH based in Celle, GERMANY.
-
Premium
Temperature and gas sensing solutions products for medical applications
Shorten product development, increase reliability, and benefit from compliance expertise. Increased lifestyle conditions, patient lifespans, and outpatient procedures are transforming medical equipment. Equipment needs to be more mobile, include data storage and insight capabilities, and be more precise than ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Emissions Monitoring for Mineral Wool Production
Opsis cross-stack monitoring systems are successfully used for emissions monitoring in mineral wool ...
By OPSIS AB based in Furulund, SWEDEN.
-
Premium
Oil Water Separators for Chemicals, Plastics and Rubber
Suspended and/or Settleable Solids Removal. Process ...
By Hydro Quip, Inc. (HQI) based in Seekonk, MASSACHUSETTS (USA).
-
Premium
Thermoformed plastic solutions for battery sector
Brentwood manufactures long-lasting parts for industrial grade batteries primarily used in the motive and standby power industries. These custom products reduce short-circuiting and increase manufacturing efficiency. Custom thermoformed and injection molded solutions from an industry leader with the expertise and resources to handle large-scale, complex projects from concept through manufacturing. ...
By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).
-
Premium
Incinerator solutions for the pathological sector
Pathological waste is basically the by-product from operations and other types of surgery. Incineration is still the recognised way to safely dispose of all kinds of pathological ...
By Inciner8 Limited based in Southport, UNITED KINGDOM.
-
Premium
Heat Exchangers Solutions for Solvent Sector
Solvent recovery requires a robust heat exchanger which can cope with this important process step. The economic and environmental implications of not getting solvent recovery right can be disastrous. Solvent discharge to the environment is a challenge for many companies, but the right heat exchange solution integrated into a suitable bespoke recovery system will remove pollutants from extraction gases, contaminated air or even ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Track-Etched Polymer Membrane Filters for Diagnostics
Recovery of cervical cancer cells and isolation of circulating rare cells, detection and counting of bacteria recovered from food, beverage or cosmetics (flow cytometry, fluorescence microscopy), detection and analysis of recovered airborne particles (asbestos, AOX), ...
By it4ip S.A. based in Louvain-la-Neuve, BELGIUM.
-
Premium
Water treatment For Hemodialysis industry
Controlling dialysate quality is critically important to hemodialysis patient health. Complications as minor as nausea and fatigue or as severe as metabolic acidosis and sepsis can result if dialysate composition is incorrect. All the factors that ultimately affect dialysate composition must therefore be carefully monitored and controlled: proper proportioning and mixing of concentrates with water; the quality of water mixed with concentrates to form dialysate; and the quality of water used in the reprocessing of ...
By Myron L Company based in Carlsbad, CALIFORNIA (USA).
-
Premium
Heat Exchangers Solutions for Petrochemicals Industry
The petrochemical industry has many requirements for heat exchangers, with different processes requiring different techniques, including plate heat exchangers, such as the HRS PHE Series and tubular heat ...
By HRS Heat Exchangers Ltd. based in Watford, UNITED KINGDOM.
-
Premium
Activated carbons solutions for medicinal and pharmaceutical industry
Modern medical treatments increasingly utilise drug therapy in addition to, or in place of, invasive measures. The growth of new pharmaceutical preparations is today at an unprecedented level. At the same time, increasing regulatory scrutiny over pharmaceutical formulations adds to the challenge for pharmaceutical companies. Jacobi has extensive knowledge of the regulatory and economic challenges faced by pharmaceutical manufacturers, and deep insight into their complex markets. Regardless of the industry sector ...
By Jacobi Group based in Kalmar, SWEDEN.
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you