- Home
- Companies
- Ntron Gas Measurement Ltd. - Process ...
- Applications
- Measurement solutions for medical gases ...
Measurement solutions for medical gases industry - Medical / Health Care
Ntron design and manufacture gas measuring systems for medical-use oxygen which are essential in monitoring and analyzing of gases used in hospitals and healthcare facilities. Offering dependable and accurate measurement of oxygen purity and trace levels of carbon dioxide, carbon monoxide and moisture is essential in a patient focused setting. Medical-use oxygen is used for resuscitation and inhalation therapy and for medical conditions such as COPD, cyanosis, shock, severe hemorrhage, carbon monoxide poisoning, trauma, cardiovascular and respiratory arrest, resuscitation, and life support. Hyperbaric chambers historically have been used to treat divers with the bends (decompression sickness), but more and more they are used to alleviate the symptoms of multiple sclerosis (MS) by increasing the oxygen absorbed into the blood.
For patient safety, Ntron’s medical gases monitors and analysers are designed to continuously measure the quality of medical-use oxygen, carbon monoxide (CO) and carbon dioxide (CO2) channelled through the hospital or facility medical gas piping network or anywhere a medical gas outlet is available. These gases must be strictly controlled to comply with current operating standards. Ntron’s medical gas measuring systems are designed to be adapted to your specific needs delivering peace of mind to you, our customer
Proven Sensor Technology
A major advantage of the Ntron Zirconia (ZrO2) sensor is fast response time and long sensor life with no drift. Additionally, shelf life or storage temperature are not an issue for ZrO2 sensors, however the most attractive feature of the Ntron Zirconia Sensor is its long service life in excess of five years under normal operating conditions. An Infra-red sensor is used for the CO2 measurement and is dependable with long service. The CO measurement is performed by an electrochemical sensor to obtain the very low levels of less than 5ppm required and are easy to replace when required. The Easidew transmitter uses proven ceramic impedance sensor technology and has been used globally for decades in trace moisture measurements.
Simple to install, Easy to operate
The MoGas93 is specifically directed at Oxygen Generation systems producing Oxygen at 93% volume and is designed to monitor the Oxygen produced. The unit is fitted with Oxygen, Carbon Dioxide, Carbon Monoxide and Dewpoint Sensors for simultaneous monitoring of the measured oxygen stream and includes Flow and Regulatory control. The Gasenz ambient monitor is ideal for use where gas lines, generators and cylinders are in enclosed rooms or corridors to warn of a potential leak. It is simply mounted to the wall and the integrated audio-visual alarm will be triggered if the oxygen levels become unsafe.