Hallux Valgus Equipment For Clinical Medicine
-
Manufactured by SYMATESEbased in FRANCE
COLLAPAT®II is a collagen medical device containing hydroxyapatite used as bone substitute in orthopaedics, spine surgery and in maxillo facial surgery and odonto-stomatology. COLLAPAT® II is a bone void filler presented in a sponge form. It is composed of a collagen structure in which ceramised hydroxyapatite granules are dispersed. The granules of hydroxyapatite give the material its ...
-
Manufactured by Vissco Nextbased in INDIA
This bunion corrector can be used for hallux valgus deformity, great toe pain & rheumatoid ...
-
Manufactured by BioPro, Incbased in USA
The Youngswick Guide is available in either 1mm, 2mm, or 3mm dorsal wedges for performing a Youngswick chevron modification to address both hallux valgus and hallux rigidus. The guides feature a 55° angle with 16 and 19mm long cutting ...
-
Manufactured by BioPro, Incbased in USA
The standard Chevron Guide offers a classic v-shape chevron osteotomy to address hallux valgus by lateral transposition of the metatarsal head. The guide features a 55° angle with 16mm long cutting ...
-
Manufactured by Orliman S.L.U.based in SPAIN
Orthosis for dynamic correction of the position of the big toe. Comprising an elastic band that wraps around the midfoot and an elastic strap with gel that acts on the big toe through controlled pressure that promotes gradual valgus alignment. Its elasticity and malleability enable a dynamic action during walking and provide a perfect fit to the foot. The intensity of the correction is fully ...
-
Manufactured by Crossroads Extremity Systemsbased in USA
The MINIBunion is a minimally-invasive implant and procedure that spares the joint capsule and gives patients a walking recovery instead of being in a cast for several weeks. The minimally-invasive Minibunion® procedure allows bunion repair through a tiny 15mm incision on the side of the foot. The incision spares the joint capsule and is basically not visible after it heals. ...
-
Manufactured by Paragon 28, Inc.based in USA
The Phantom® Intramedullary Nail is the first Paragon 28® intramedullary nail and offers a unique option for correcting hallux valgus at the first TMT joint. The nail and threaded peg construct is zero profile and minimizes the soft tissue disruption of the first metatarsal and medial cuneiform during a Lapidus procedure. The Phantom® Intramedullary Nail instrumentation system ...
-
Manufactured by mahe medical gmbhbased in GERMANY
RIFIX angle-stable titanium plates: for the arthrodesis of the MTP1 joint. ...
-
Manufactured by Medical Due s.r.l.based in ITALY
Distal osteotomies of the first metatarsal allow correction in all three planes of the structural deviations typical of hallux valgus. Distal osteotomies exhibit similar biomechanical characteristics, the most important of which is the ability to change the position of the metatarsal head in all three planes of ...
-
Manufactured by Merete Technologies, Inc. (MTI)based in USA
Locking plate for Hallux-Valgus interventions through proximal chevron, crescentic and closing or open wedge osteotomies as well as TMT1 and MTP1 fusion procedures. The BLP™ Plate is an anatomically shaped U-oblique locking plate that adapts the proximal curvature of the first metatarsal. The plate is available in four lengths (31, 33, 35 and 37 mm) for left and right feet. The plate ...
-
Manufactured by Medical Due s.r.l.based in ITALY
Distal osteotomies of the first metatarsal allow correction in all three planes of the structural deviations typical of hallux valgus. Distal osteotomies exhibit similar biomechanical characteristics, the most important of which is the ability to change the position of the metatarsal head in all three planes of ...
-
Manufactured by Florett GmbHbased in GERMANY
Stretchy materials in the upper bring palpable relief to the wearer. The combination of materials and the profile of these models provide stability, while alleviating pressure where it matters most. Stretch shoes continue to fit perfectly, even as swelling increases or goes down throughout the day. This prevents pinching and blisters. Worn in combination with orthopaedic insoles, these shoes can ...
-
Manufactured by Triamedbased in ROMANIA
It is used for the correction of hallux valgus and post-surgery. To be worn during the night. It is made of textile, provided with a mouldable metal splint designed to physiologically correct the position of the hallux. Hook and loop fastener. ...
-
Manufactured by OPED Medical Inc.based in USA
The Best Short Boot for Fore- and Midfoot injuries. Secure protection and stability of the foot. Enhanced mobility. Indications: Hallux valgus/rigidus, Arthrodeses of the toe joints, Hammer toe and claw toe, Lapidus procedure, Metatarsal ...
-
Manufactured by Merete Technologies, Inc. (MTI)based in USA
The Merete® Cannulated HCS (Headless Compression Screws) are self-drilling/self-tapping, dual pitched screws with a threaded head which can be countersunk into the bone. The screws are available in diameters of 3.0 mm, 4.3 mm and 6.5 mm in various ...
-
Manufactured by Novastep Inc.based in USA
Centrolock Guided Transverse Osteotomy System was designed to evolve the standard fixation and treatment methods to correct hallux valgus. The innovative hybrid design combines a cannulated intramedullary stem with plate fixation on the metatarsal head. Powerful three plane corrections once achieved only by Lapidus, can now be performed through a distal minimally invasive guided approach. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you