7 products found
Albach Maschinenbau AG Products
-
Chippers
-
Silvator - Model 2000 - Chippers
Performance Overview: V8 engine with 450 kW / 612 hp. 1230 mm wide, 980 mm high collection. adjustable impeller blower. chain free, hydraulic direct drive, maintenance-free. Street legal 44 km / h with 50 km / h. 8.50 m Turning radius at 9.70 m length. 10.1 m – crane with 275 degree working range. Cab suspension may be increased to 1.20 m: the driver an optimum view of the polder and ...
-
Diamant - Model 2000 - Chippers
Volvo Penta In-Line 6 Cylinder with 612/700/770 HP. 1230 mm wide, 980 mm high collection. Adjustable impeller blower. Chain free, hydraulic direct drive, maintenance-free. Central lubrication. Street legal with 70 km / h. Motorway approval. Quick change of bedknife. Balanced lighting concept with 32 working ...
-
Fellcrane
-
Fellcrane
Chassis under carriage: Typ: Grove GMK3050 / 3055 / 3060 3-acle. transmission: automatic ZF-gear shift. Dimensions: Length: 10,75 m. width: 2,55 to 2,85 m (depending on tyre size). height: 3,98 m. weight: 27 t (+ felling ...
-
Tilt Feller
-
Model TFZ 90 - Tilt Feller
The Tilt Folding Tongs TFZ 90 was developed by our partner company, Bachmaier agricultural engeneering.The pliers designed for the Sennebogen 718 material handler are capable of handling log diameters of up to 700 millimeters. The sword length is 900 mm. The max. Gripper opening is 1870 mm, the minimum trunk diameter should not be less than 110 ...
-
BBHK Models (Desert)
-
Model BBHK - Chopping Units
The BBHK series impresses with its cleanly calibrated chips with little fines. Bulky crown material can be chopped thanks to the powerful feed mechanism with a pulling force of 4000 kg. Thanks to the robust construction and the massive spherical roller bearing of the chopping drum, the BBHK series is also suitable for chopping hardwood. Frozen hardwood can also be chopped easily and ...
-
Model KPC / WPC Series - Desert for Chopping Crown
The inlet size of the KPC / WPC models is ideal for chopping crown, thinning and log material. An aggressive, powerful feeder also supports the operator when chopping difficult material. A very good throughput with optimal fuel consumption is guaranteed by the ratio between the rotor dimension and inlet size, but also by the number of knives and the knife ...
-
Model HD-810 and HDC-812 - Chopping Units
HD-810 and HDC-812 chopping units stand for extreme chopping performance and the highest quality chips. The machine is suitable for chopping branches, trunk material and whole trees. The processing of hardwood stock material also poses no problems for this chipping unit. The ejection of the HD-810 is hydraulically driven. The operator can continuously adjust the ejection speed and thus the ejection distance. The hydraulically driven ejection blower ...