16 products found
products
-
Optical Systems
-
Zoom Beam Expander
EKSMA OPTICS offers compact Galilean type zoom beam expanders for Nd:YAG lasers fundamental and its harmonics wavelength: 1064 nm, 532 nm and 355 nm. Zoom beam expander provides variable expansion ratio of 2x-8x or 1x-8x with adjustable focus to correct for laser beam ...
-
Compact Beam Expanders
The Compact Beam Expander is designed to increase the diameter of a collimated input beam to a larger collimated output beam. EKSMA OPTICS offers compact Galilean type beam expanders for 1064 nm, 532 nm and 355 nm wavelengths. The Compact Beam Expander has a possibility to be adjusted for the input beam divergence angle to obtain collimated, divergent or focused beam at the ...
-
Lasers & Laser Modules
-
Model DLM-405-ML & NL Series 50~250mW - OEM Diode Laser Modules
Diode Laser Modules DLM-405-ML Series for 405 nm. Output power ranges from 50 to 300 mW. Diode laser modules can be used for laser show, display, laser ...
-
Model DLM-445 Series 1000mW - OEM Blue Laser Module
OEM Blue Laser Module DLM-445 Series 445 nm, output power - 1000 mW. Blue Laser Modules can be used for laser show, display, laser alignment, ...
-
Nonlinear and Laser Crystals- Crystals for Stimulated Raman Scattering
-
Model KGW - Crystals
EKSMA OPTICS offers crystalline materials - Barium Nitrate - Ba(NO3)2 and undoped potassium gadolinium tungstate KGd(WO4)2 or KGW which have attracted much interest as most suitable crystals for stimulated Raman scattering (SRS). These materials can be used for frequency conversion in lasers for extending of tuning range. SRS in crystals is compatible with current all-solid-state technology and provides a very simple, compact means of frequency ...
-
Nonlinear and Laser Crystals- Ovens & Holders
-
Model TC1 - CO1 - Temperature Controller with Oven
TC1 together with CO1 is a high temperature set (up to 200 °C) consisting of thermocontroller TC1 and crystal oven CO1. TC1 has two independent outputs and can control two CO1-30 ovens simultaneously or one CO2-50 oven. Trough RS232 computer interface it can be controlled from personal computer. Actual crystal temperature is shown on LED display. The nonlinear crystal is mounted into adapter before insertion into oven CO1. Such design facilitates ...
-
Heatpoint Oven for Nonlinear Crystals
Heatpoint is a compact round oven designed for heating of nonlinear crystals and keeping them at their optimal operation temperature. It is also suitable for thermo-stabilization of crystals with low thermal acceptance. The oven could be used for heating of LBO, KTP, DKDP or other crystals. Oven's temperature is preset and can be chosen up to 80 ...
-
Model CH3 - Oven for Nonlinear Crystals
CH3 is a compact oven with build-in thermocontroller for temperature up to 60 °C. It is ideal for larger aperture crystals like KD*P. The crystals with up to 15 x 15 mm dimensions can be mounted. CH3-30 model can fit crystals with up to 30 mm length. Each oven is made exactly for specified crystal, so it cannot be used for different size ...
-
Open Ring Holders
Ring mounts made of black anodized aluminum are available for safe and convenient handling of nonlinear crystals. Holder 830-0001-06 comes with white anodized aluminium adapter, crystals have to be glued into it. No glue is used for fixation of the crystal into other open ring holders, which are provided with teflon adapters. The standard sizes of ring holders are Ø25.4 mm or Ø30 mm with thickness range from 6 mm to 17.5 mm depending on ...
Products by Quantum Light Instruments Ltd. (QLI)
-
Q-Switched Lasers
-
QLI - Model Q1 - Compact Diode Pumped Q-Switched Laser
Q1 is compact, energy-efficient, diode pumped, air-cooled, Q-switched laser designed for wide range of applications that require high peak power pulses. Laser can produce up to 45 mJ at 10 Hz pulse repetition rate or up to 10 mJ at 50 Hz pulse repetition rate. Low divergence of laser beam allows efficient conversion to harmonic wavelengths using optional H1 series harmonic generator module. The laser can configured to emit 1053 nm or 1064 nm ...
-
QLI - Model Q2 - High Peak Power Compact Q-Switched Laser
Q2 series diode pumped, fully air-cooled, Q-switched laser is designed for wide range of applications that require high peak power pulses. Our innovative water-free laser crystal end-pumping technology allows to produce Gaussian-like, low divergence laser beam. At the same time, Q2 is versatile platform that can be configured in many ways. For example, Q2 be configured for 80 mJ pulse energy at 10 Hz pulse repetition rate. For high repetition rate ...
-
QLI - Model Q2HE - High Energy Air-Cooled Q-Switched Laser
Quantum Light Instruments Ltd. innovative water-free laser crystal cooling technology enables generation of high quality laser beam with up to 100 mJ pulse energy and/or up to 4 W average output power. Q2HE series sets new standard in Q-switched laser market. Advanced laser design resulted in compact, user-friendly turnkey system that requires little maintenance. There is no chillers or bulky power supplies that one needs fit under the table. Most of ...
-
QLI - Model Q-Tune - Air-Cooled, Diode-Pumped, Tuneable Wavelength Q-Switched Laser
Q-TUNE is single housing tunable wavelength laser. It employs Optical Parametric Oscillator (OPO) to produce tunable wavelength in 410-2300 nm range with linewidth narrower that 6 cm-1. Optional second harmonic generator extends tuning range to 210-410 nm with linewidth narrower that 12 cm-1. Combined with shorter than 5 ns pulse duration and up to 100 Hz pulse repetition rate Q-TUNE is perfect coherent light source for temporally resolved ...
-
QLI - Model Q-Spark - Short Pulse Q-Switched Laser
Q-SPARK is diode pumped, water-free, Q-switched laser designed for wide range of applications that require high peak power short pulses. Our innovative water-free laser crystal end-pumping technology allows to produce Gaussian-like, low divergence, high peak power laser beam in compact package. Due to short laser cavity laser delivers up to 5 mJ at < 800 ps pulse duration or up to 10 mJ at < 1.5 ns pulse duration. Models with pulse repetition rates ...
-
Accessories
-
QLI - Model H1 for Q1 Series - Stand-Alone Harmonics Lasers Generator
H1 is stand-alone harmonic generator module is designed to be used with our Q1 series lasers. Module is intended to be mounted side-by-side with Q1 laser on common optical table or breadboard. H1 has two exit ports that can be factory-configured to emit up to 5th harmonic wavelengths. Most common standard configurations are listed in the table below. Harmonic generation is a phase-sensitive process which requires phase matching to be efficient. Phase ...
-
QLI - Model Q2/Q2HE - Compact Second Harmonic Generator SHG for Lasers
SHG is compact second harmonic generator module is designed to be attached to our Q2 or Q2HE series lasers. SHG has two exit ports that can be factory-configured in several ways. Standard configurations are listed in the table below. Second harmonic beam can be configured to be coaxial with fundamental beam (SHG-0 option) or can be separated from fundamental by build-in dichroic mirrors (SHG-1 and SHG-2 options). When supplied together with Q2/Q2HE series ...