138 products found
Fluxana GmbH Co. KG Products
-
Liquid Analysis Technology
-
Fluxana - Professional XRF Sample Cups
Sample cups for all kinds of XRF spectrometers – approved by customers ...
-
Fluxana Mylar - XRF Thin Films
Films from Mylar, Polypropylene and more in user friendly forms and ...
-
Fluxana - XRF Preassembled Cups
Safe time using our customer-specific pre-prepared cups with film. Highest quality with test ...
-
Fluxana - Special Grease Caps
Special grease caps for the analysis of high viscosity oils and ...
-
Fluxana - Model WZ-0001 - Preparation Tool
The simple solution for the preparation of sample cups with ...
-
Pressing - Vaneox Presses
Professional XRF presses from 15t to 40t.
-
Vaneox - Model 15t - Manual Press
Manual Operation. Up to 15t maximum pressure. Two lever positions. Stroke: 16mm. Entry-level model - ideal for benchtop ...
-
Vaneox - Model 25t - Manual Press
Manual Operation. Up to 25t maximum pressure. Stroke: 16mm. Basic model - suitable for most XRF pressing ...
-
Vaneox - Model 25t - Automatic Electric Press
Automatic Operation. Up to 25t maximum pressure. Stroke: 30mm. High throughput model – ideal for ...
-
Vaneox - Model 40t - Manual Press
Automatic Operation. Up to 40t maximum pressure. Stroke: 60mm. Touch display and software. Programmable all-rounder for maximum ...
-
Pressing - Pellet Sample Binders
CEREOX, CELLEOX and BOREOX - bring stability to any sample.
-
Boreox - Binder
Direct replacement for boric acid. Harmless organic material. Binder with excellent binding properties. High resistance to x-rays. Can be used as backing ...
-
Cereox - XRF Sample Binder
Binder comprised of wax (formerly known as Hoechst wax). Clean and resistant to x-rays. Forms a perfect pellets with any ...
-
Celleox - Cellulose Based Binder
Cellulose based binder. Used mainly as grinding aid. Available as grinding aid tablets. Great to absorb water to analyse aggressive ...
-
Pressing - Pressing Dies
-
Fluxana - Pressing Dies for 15/25 t Presses
For VANEOX 15 and 25 t presses. Made from stainless steel. Diameter between 8 and 55 mm. Pressing dies for rings ...
-
Fluxana - Pressing Dies for 40 t Press
For VANEOX 40 t press. Made from stainless steel. Diameter between 8 and 55 mm. Pressing dies for rings ...
-
Pressing - Mixer
-
Fluxana - Model XRF -MUK - Mixer and Accessories
Thoroughly homogenisation of powder samples for pressing. Variable speed control: 0-3000 rpm. Powerful 30 watt motor. Continuous or touch activation. Shock-absorber feet. 145 x 175 x 140 mm (W x D x H), Weight: 1.9 kg. Power AC 230 V/50 Hz or 110 V/60 ...
-
Pressing Technology - Accessories
-
Fluxana - Filling Tool
Creates thin layer of sample on the pellet. Suitable for low sample ...
-
Fluxana - Pellet Films
Avoids contamination of pressed pellet. Prevent sticking of pellet to pressing die. Different ...
-
Fluxana - Aluminium Cup
Ideal to stabilize samples. Good for pressed pellet labelling. Enables autosampler handling. Different ...
-
Fluxana - Rings
Used to stabilize samples. Allows pressed pellet automation. Different diameters ...
-
Fusion - Accessories
-
Fusion
-
Fluxana - Laboratory Furniture
Fume hood with ventilator. Safety housing. ...
-
Fluxana - Desiccator
Save sample storage. For sensible calibration and monitor ...
-
Fluxana - Laboratory Storage Boxes and Handling Tool
Cabinets and boxes. Handling tool. Different sizes and ...
-
Fluxana - Ultrasonic Bath
Easy cleaning of platinum crucibles and ...
-
Vitriox - Model 4+ - Electric Fully Automatic Fusion Machine
The VITRIOX ELECTRIC 4 + is a fully automatic fusion machine with cold to cold operation for 4, 8, 12 or 16 samples (4 samples at a time). It has been designed to achieve the best possible results in day-to-day XRF laboratory routine while offering a high ...
-
Vitriox - Electric Fully Automatic Fusion Machine
The Vitriox Electric is a fully automatic fusion machine with cold to cold operation for 1, 2, 4 or 6 samples (1 sample at a time). lt has been designed to achieve the best possible results in day-to-day XRF laboratory ...
-
Vitriox - Gas Operated Fusion Machine
The VITRIOX® GAS is a gas operated fusion machine with cold to cold automation and up to 6 positions that can operate simultaneously. lts technology is based on many years experience in XRF fusion and ...
-
Boramat - Model Mono - Automatic Material Dosing Machine
The BORAMAT Mono Material Doser is an automatic dosing machine for flux in XRF analysis. lt is designed to improve day to day routine in the laboratory, allowing the user to weigh faster and monitor every weighing. Since it is compatible with all common laboratory scales, it can be installed in most laboratories without having to invest in a new ...
-
Boramat - Model 18 - Automatic Dosing Machine
Dosing of up to 18 samples of flux with the automatic dosing machine BORAMAT 18. Greatly improve the efficiency and precision of your weighing routine and save time during sample preparation in your XRF laboratory. The intelligent software and monitoring functions minimize error and increase security in the whole weighing ...
-
Boramat - Model 30 - Automatic Dosing Machine
Dosing of up to 30 samples of flux with the automatic dosing machine BORAMAT 30. Compared to the BORAMAT 18, the BORAMAT 30 gains yet more efficiency and therefore saves more time in sample preparation. It weighs 30 samples in containers up to max. 27 mm diameter. The intelligent software and monitoring functions minimize error and increase security in the whole weighing ...
-
Fluxana - Flux and Additives
We deliver lithium borates and additives with guaranteed purity from in-house production. With every delivery of flux you will receive a specification. Anhydrous homogeneous pre-fused fluxes with a low loss on ignition and defined granulometry. With these fluxes, the sample is totally dissolved in a borate glass with a perfect ...
-
Fluxana - Platinum Ware
Platinum ware made from platinum/gold 95/5 for fusion machines and laboratory needs. Old platinum ware is accepted for recycling as credit against your next order. All deliveries are insured by FLUXANA. We also offer all platinum ware in FKS. This surface finishing increases the lifetime of your crucibles and moulds. FLUXANA arranges pick-up and insurance of your platinum for ...
-
Reference Materials
-
Fluxana - Reference Cement Material for X-ray Fluorescence Analysis
FLUXANA is a producer of exclusive reference materials. These reference materials are produced especially for the use of XRF and are highest quality standards. Our catalog contains the following reference materials: Cements, Refractories, Zeolite, Plastic ROHS, Plastic PE, Gold jewelery alloy for micro XRF instruments, Gold jewelery alloy for handheld XRF instruments, Glass. But also XRF calibration sets (e.g. cement, raw materials, ash, glass and many ...
-
Fluxana - Long-Term Stable Drift Monitors
Use drift monitors to ensure the long-term stability of your calibration. Long-term Stable Drift Monitors (Control Samples) for Drift Correction. Like most analytical instruments, X-Ray fluorescence spectrometers show changes in their analytical performance over time. The X-Ray tube loses intensity and the detector loses sensitivity after using them for a while. This negatively affects calibrations installed on the ...
-
FLUXearch - Comprehensive Reference Material
Get your reference materials for XRF and OES quickly and easily in our database of over 21,000 standards. FLUXearch is the comprehensive reference material database of FLUXANA® with a variety of certified and non-certified ...
-
XRF Liquid Analysis Technology - Thin Films
-
FLUXANA - Model TF-025 - XRF Thin Films Microporous Polypropylene 6.4cm x 5.1m Roll
The preferences of our thin films: 25% more pre-cut films per package than other brands, dust proof anti static packaging , lot number tracking system , rolls, pre-cut circles & ...
-
Pressing Technology - VANEOX Presses. XRF (X-ray fluorescence analysis)
-
VANEOX - Model PR-15 - 15t XRF Manual Press
for X-ray fluorescence analysis. There are two lever positions that can be used to exert the pressure in two different ways. use with typical dies for all common preparation techniques e.g. 32mm, 40mm, 40/32mm rings, 51,5/35mm rings, also customer specific diameters with or without ring ...
-
VANEOX - Model PR-25A - 25t XRF Automatic Presses
for X-ray fluorescence analysis. - automatic pressing, manual release - use with typical dies for all common preparation techniques e.g. - 32mm - 40mm - 40/32mm rings - 51,5/35mm rings - also customer specific diameters with or without ring ...
-
VANEOX - Model PR-25N - 25t XRF Manual Press
for X-ray fluorescence analysis. The VANEOX® PR-25N has a capacity of 16mm. - use with typical dies for all common preparation techniques e.g. - 32mm - 40mm - 40/32mm rings - 51,5/35mm rings - also customer specific diameters with or without ring ...
-
VANEOX - Model PR-40 - 40t XRF Automatic Press
for X-ray fluorescence analysis. - NEW: Touch Display - NEW: Removeable drawer for easy cleaning of the pressing room - First bench top unit worldwide - Integrated die for all common preparation techniques e.g. - 32mm - 40mm - 40/32mm rings - 51,5/35mm rings - also customer specific diameters with or without ring possible. - 10 different application programs - 3 ramping steps programmable - Press chamber ...
-
Pressing Technology - Pellet Dies
-
FLUXANA - Model PR-40-CD32 - Evacuable Pellet Die Complete 32mm
The dies are designed for use with our 40t press (PR-40). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. Halide disks for infrared analysis are usually produced with 13mm sized ...
-
FLUXANA - Model PR-40-CD35 - Evacuable Pellet Die Complete 35mm
The dies are designed for use with our 40t press (PR-40). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are usually produced ...
-
FLUXANA - Model PR-40-CD40 - Evacuable Pellet Die Complete 40mm
The dies are designed for use with our 40t press (PR-40). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. Halide disks for infrared analysis are usually produced with 13mm sized ...
-
VANEOX - Model PR-CD-6008-6020 - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25-HD and PR-25A-HD). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
VANEOX - Model PR-CD-6021-6031 - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25 and PR-25A). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
VANEOX - Model PR-CD-6032 - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25 and PR-25A). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
VANEOX - Model PR-CD-6032R - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25 and PR-25A). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
Fluxana - Model PR-CD-6033-6039 - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25-HD and PR-25A-HD). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
Fluxana - Model PR-CD-6035R_a - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25-HD and PR-25A-HD). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
FLUXANA - Model PR-CD-6040 - XRF Pellet Die 40mm
The dies are designed for use with our 25t presses (PR-25-HD and PR-25A-HD). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
FLUXANA - Model PR-CD-6041-6051 - XRF Pellet Die 41 to 51mm
The dies are designed for use with our 25t presses (PR-25-HD and PR-25A-HD). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared analysis are ...
-
Pressing Technology - Binding Additives for XRF-Analysis
-
CEREOX - Model BM-0002-1 - Binding Additives for XRF-Analysis 250g Powder
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under X-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. Mixed with a sample (1 part wax to 4 ...
-
CEREOX - Model BM-0002-1B - Binding Additives for XRF-Analysis 20g Powder
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under x-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. ...
-
CEREOX - Model BM-0002-5 - XRF Licowax C Micropowder
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under X-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under X-rays. ...
-
CELLEOX - Model BM-0003-20 - XRF Binder on Cellulose Basis 20kg
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under x-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. Mixed with a sample (1 part wax to 4 ...
-
CELLEOX - Model BM-0003-250 - XRF Binder on Cellulose Basis 250g
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under x-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. Mixed with a sample (1 part wax to 4 ...
-
Boreox - Model BM-0008 - XRF Binders 250g (Replacement for Boric Acid)
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
Boreox - Model BM-0008-1K - Binder for XRF Tablet 0.33g, Diameter 10mm, Thickness Approx. 5,5mm
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
BOREOX - Model BM-0008-20K - Binder for XRF Tablet 0.33g
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
Boreox - Model BM-0008-5 - XRF Binders 5kg (Replacement for Boric Acid)
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
BOREOX - Model BM-0008-5K - Binder for XRF Tablet 0.33g
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
Boreox - Model BM-0008-B - XRF Binder, Quantity 20kg (Replacement for Boric Acid)
For the preparation of pressed pellets for XRF, in most cases, a binder is required. One of the traditional materials used as a binder or backing material is boric acid. However, recently this will be classified by REACH as toxic. Based on this health issue, boric acid is now not considered an appropriate material for this ...
-
Boreox - Model BM-0008-Pellet_34mm - Binding Additives for XRF-Analysis
Paste samples, such as greases or creams, can be filled into the indentation with a spatula. Here, it is important to be sure that the applied sample has a defined layer thickness. The "cells" are placed in a sample cup and measured under helium. This method is also described in the DIN 51829 " Bestimmung von Additiv- und Abriebelementen in Schmierfetter" ("Determination of Additive and Wear Elements in Greases"). Boreox® pellet with 1mm deepening ...
-
Boreox - Model BM-0008-Pellet_40mm - Binding Additives for XRF-Analysis
Paste samples, such as greases or creams, can be filled into the indentation with a spatula. Here, it is important to be sure that the applied sample has a defined layer thickness. The "cells" are placed in a sample cup and measured under helium. This method is also described in the DIN 51829 " Bestimmung von Additiv- und Abriebelementen in Schmierfetter" ("Determination of Additive and Wear Elements in Greases"). Boreox® pellet with 1mm deepening ...
-
Fusion Technology - XRF BORAMAT Material Doser
-
BORAMAT - Model BO-0001 - XRF Material Doser
Weighing of flux has never been this easy! With just the push of a button, the BORAMAT® automatically weighs the desired amount of flux for XRF analysis. The fast and precise dosing allows the user to work more efficiently and improve the day to day routine in the laboratory. Since it is compatible with common laboratory scales, it can be installed in most laboratories without having to invest in a new ...
-
BORAMAT 18 - Model BO-0004 - XRF Material Doser for Flux
Dosing of up to 18 samples of flux with the automatic dosing machine BORAMAT® 18. Greatly improve the efficiency and precision of your weighing routine and save time during sample preparation in your XRF laboratory. The intelligent software and monitoring functions minimize error and increase security in the whole weighing process. A small scale that is built into the machine enables the use of the catch weight function. With it the user can weigh in a ...
-
Fusion Technology - XRF Platinum Ware
-
FLUXANA - Model FS-OA434 - XRF Mould Platinum/Gold 95/5 for VITRIOX GAS
The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of precious metal really shipped and may therefore differ from the order ...
-
FLUXANA - Model FS-OA434FKS - XRF Mould Platinum/Gold 95/5 FKS
The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of precious metal really shipped and may therefore differ from the order ...
-
FLUXANA - Model FS-OA438 - XRF Mould Platinum/Gold 95/5 for VITRIOX GAS
The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of precious metal really shipped and may therefore differ from the order ...
-
FLUXANA - Model FS-OA438FKS - XRF Mould Platinum/Gold 95/5 FKS
The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of precious metal really shipped and may therefore differ from the order ...
-
FLUXANA - Model FS-OA439 - XRF Mould Platinum/Gold 95/5 for VITRIOX Gas
The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of precious metal really shipped and may therefore differ from the order ...
-
FLUXANA - Model FS-OA439FKS - XRF Mould Platinum/Gold 95/5 FKS for VITRIOX GAS
XRF Mould Platinum/Gold 95/5 for VITRIOX Gas - inner diameter top 41/bottom 39mm x height 3,8mm - bottom thickness 0,8mm - ca. 46g FKS increases the lifetime of your crucible and moulds The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only ...
-
FLUXANA - Model FS-OA877 - XRF Mould Platinum/Gold 95/5 for VITRIOX GAS
XRF Mould Platinum/Gold 95/5 for VITRIOX Gas - inner diameter top 34/bottom 32mm x height 3,8mm - bottom thickness 0,8mm - ca. 31g The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of ...
-
FLUXANA - Model FS-OA877FKS - XRF Mould Platinum/Gold 95/5 FKS for VITRIOX GAS
XRF Mould Platinum/Gold 95/5 for VITRIOX Gas - inner diameter top 34/bottom 32mm x height 3,8mm - bottom thickness 0,8mm - ca. 31g FKS increases the lifetime of your crucibles and moulds. The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only ...
-
FLUXANA - Model FS-OT866 - XRF Crucible Platinum/Gold 95/5 for VITRIOX GAS
3 pins on an extra ring, Diameter top 34/bottom 20mm x height 38mm, bottom thickness 0,5mm, stabilized margin with persistent ring, ca. 45g. The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the ...
-
Fluxana - Model FS-OT867 - XRF Crucible Platinum/Gold 95/5 for VITRIOX GAS
The precious metal price is per g and will be calculated on the total amount of Pt/Au 95/5 and is a daily price. Based on your order you will get an order confirmation with the actual daily price which is base for the invoice. The weights for precious metal are only estimated. The final invoice will be based on the weights of precious metal really shipped and may therefore differ from the order ...
-
FLUXANA - Model FS-OZ327 - Platinum Tongs V2A-Steel, Pt Shoes, 230mm, 5g
The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4005 - Mould Pt/Au FKS 31/29 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 FKS 31/29 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 30 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4006 - Mould Pt/Au FKS 36/34 mm for XRF Electrical Fusion Machines
German utility patent, international patent pending. Mould Pt/Au 95/5 FKS 36/34 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 46 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4007 - Mould Pt/Au FKS 34/32 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 FKS 34/32 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 30 . The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4008 - Mould Pt/Au FKS 41/39 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 FKS 41/39 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 46 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4009 - Mould Pt/Au 41/39 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 41/39 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 46 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4010 - Mould Pt/Au 36/34 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 36/34 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 46 . The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4011 - Mould Pt/Au 34/32 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 34/32 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 30 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4012 - Mould Pt/Au 31/29 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 31/29 mm for electrical fusion machine, bottom thickness 0,8 mm, approx. 30 . The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4014 - Mould Pt/Au FKS 41/39 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 FKS 41/39 mm for electrical fusion machine, bottom thickness 1,4 mm, approx. 80.The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIA4015 - Mould Pt/Au 41/39 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Mould Pt/Au 95/5 41/39 mm for electrical fusion machine, bottom thickness 1,4 mm, approx. 80. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VID01 - Lid Pt/Au 95/5 for crucible for XRF Electrical Fusion Machine
German utility patent, international patent pending. Lid Pt/Au 95/5 for crucible for Electrical Fusion Machine, approx. 8 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model FS-VIT01 - Crucible Pt/Au 95/5 mm for XRF Electrical Fusion Machine
German utility patent, international patent pending. Crucible Pt/Au 95/5 Electrical Fusion Machine, approx. 45 g. The fusion technology is used to prepare samples to be analyzed with an X-ray fluorescence machine. It is also used to improve precision over pressed powder ...
-
FLUXANA - Model VU-Quarz-Schmelztiegel - Quartz Crucible for VITRIOX ELECTRIC
FLUXANA’s quartz crucibles for the VITRIOX ELECTRIC fusion machine allow the fusion of samples that contain the so-called platinum poisons (sulfides, metals – especially aluminum – carbides, nitrides) which frequently lead to considerable damage to platinum/gold crucibles. The quartz crucibles are only suitable for single use and require the FS-VIH01 platinum ...
-
CEREOX - Model BM-0003-20 - XRF Binder on Cellulose Basis 20kg
Here a general survey of the application of the FLUXANA binders in the XRF: - BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under x-rays. It is particularly good when used as a backing material. - CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. Mixed with a sample (1 part ...
-
FLUXANA - Model SC-1520 - XRF Professional Cups
XRF micro sample cups, double open ended with vented caps set=100pcs The sample cups of FLUXANA are designed for use in XRF. All cups have been optimized and approved by our customers world ...
-
FLUXANA SC-0001 Tool to Prepare Sample Cups
Tool to prepare sample cups. This tool will help you to prepare sample cups with ...
-
FLUXANA - Model PR-CD-60XX - XRF Pellet Die
The dies are designed for use with our 25t presses (PR-25 and PR-25A). Dies with 32 and 40mm are commonly used in pressing samples for XRF and XRD analysis. However also dies with different ring systems are available. For other industrial applications Fluxana can also produce dies with diameters between 8 and 51mm. All of the dies are equipped with nitrile O-ring seals and 2 pellets to press the sample between. Halide disks for infrared ...
-
FLUXANA - Model BM-0003-1 - XRF Binder Cellulose Tablet 1kg
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under X-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. Mixed with a sample (1 part wax to 4 ...
-
FLUXANA - Model BM-0003-5 - XRF Cellulose Based Binders
Here a general survey of the application of the FLUXANA binders in the XRF: BOREOX, a direct replacement. This is a harmless organic material which shows excellent binding properties and high stability under x-rays. It is particularly good when used as a backing material. CEREOX can be used alternatively, CEREOX is comprised of a wax, previously known as Hoechstwax. This material is clean and very stable under x-rays. Mixed with a sample (1 part wax to 4 ...
-
FLUXANA - Model MU-RMM200-MPS - XRF Mixing Container, 28ml
Use the FLUXANA mixer to mix samples with binder. The homogenized powder can be used for the preparation of pressed pellets. Mixing balls are added to the mixing container to guarantee a thoroughly mixed ...
-
Fluxana - Model MU-Scontainer - XRF Mixing Container, 40ml
Use the FLUXANA mixer to mix samples with binder. The homogenized powder can be used for the preparation of pressed pellets. Mixing balls are added to the mixing container to guarantee a thoroughly mixed ...
-
Fluxana - Model MU-XRF-Mixing-Set_60Hz - XRF Mixing Starter Kits
FLUXANA Mixer to mix sample with binder to homogenized for pressed powders. Variable speed control between 0-3000 rpm. Powerful 46 Watt motor . Continuous or touch activation . Shock-absorber feet . Includes rubber platform cover . 145 / 175 / 140 mm (w / d / h) . Weight 1,9 kg . Power ac ...
-
Fluxana - Model MU-XRF_50Hz - XRF Mixing Sets (220V)
FLUXANA Mixer to mix sample with binder to homogenized for pressed powders. Variabel speed control between 0-3000 rpm. Powerful 46 watt motor . Continuous or touch activation . Shock-absorber feet . Includes rubber platform cover . 145 / 175 / 140 mm (w / d / h) . Weight 1,9 kg . Power ac ...
-
VITRIOX - Model VI-0001-1 - XRF Electrical Fusion Machine
VITRIOX® ELECTRIC for 1, 2, 4 or 6 samples, incl. sample holder and protective housing. The VITRIOX® ELECTRIC is a fully automatic fusion machine with cold to cold operation for 1, 2, 4 or 6 samples; 1 sample at a time. It has been designed to achieve the best possible results in day-to-day XRF laboratory routine. Safety: casting dish monitoring, flux resistant FLUXinert® ceramics and safety housing with autolock function. Highest precision: ...