Thrombectomy Manufacturers, Suppliers & Companies
-
Manufacturerbased in Irvine, CALIFORNIA (USA)
Walk Vascular was founded in 2010, with a mission to treat and transform the lives of patients suffering from peripheral arterial and venous disease. Its JETi Thrombectomy System (JETi) is manufactured within The Company's 19,000 sq. ft., Irvine, ...
JETi - Model AIO - Peripheral Thrombectomy System
The JETi AIO Peripheral Thrombectomy System is intended to remove/aspirate fluid and break-up soft emboli and thrombus from the peripheral vasculature and to sub selectively infuse/deliver diagnostics or therapeutics with or without ...
CONTACT SUPPLIER -
Manufacturerbased in Alameda, CALIFORNIA (USA)
Penumbra, Inc., headquartered in Alameda, California, is a global healthcare company focused on innovative therapies. Penumbra designs, develops, manufactures and markets novel products and has a broad portfolio that addresses challenging medical ...
Penumbra - Mechanical Thrombectomy System
The Penumbra System is a fully-integrated system designed specifically for mechanical thrombectomy. It is intended for use in the revascularization of patients with acute ischemic stroke secondary to intracranial large vessel ...
CONTACT SUPPLIER -
Manufacturerbased in Irvine, CALIFORNIA (USA)
Inari Medical is dedicated to treating venous thromboembolism and transforming the lives of patients suffering from venous diseases by safely and effectively removing blood clots. We put our patients first and embrace the opportunity to celebrate ...
Inari Medical - Model FlowTriever - Mechanical Thrombectomy Device Indicated for Pulmonary Embolism
The FlowTriever is an over-the-wire system designed to: Remove clot through both mechanical and aspiration mechanisms of action, Capture and Remove large clot burden from big vessels, Treat in a single session, Eliminate the need for thrombolytics, ...
CONTACT SUPPLIER -
Technologybased in Galway, IRELAND
VETEX Medical is an Irish medical device company developing a revolutionary thrombectomy catheter to speedily extract thrombus in a single session. The Vetex device is the first DVT device to combine rotational and grasping action to quickly and ...
Vetex Medical ReVene - Thrombectomy Catheter
The Vetex Medical ReVene® Thrombectomy Catheter has been engineered with a patented dynamic cage technology that enables the predictable removal of wall adherent thrombus in a single session without the need for ...
CONTACT SUPPLIER -
Manufacturerbased in San Mateo, CALIFORNIA (USA)
Founded in 2015, Route 92 Medical is a privately held, commercial-stage medical technology company, based in San Mateo, CA. We are developing novel neuro-interventional technology with an application in stroke. Route 92 Medical’s mission is to ...
-
Software vendorbased in San Mateo, CALIFORNIA (USA)
For 20+ years, most believed we had only a few hours after a stroke to provide treatment—but we were never satisfied with that thinking. We theorized that stroke evolution was highly variable, the conventional short treatment windows could be ...
Rapid Aspects - Automatic Identification Software
quickly assess patient eligibility for thrombectomy. ...
CONTACT SUPPLIER -
Manufacturerbased in Chambly, FRANCE
ISOMed is specialized in disposable medical devices for vascular access. Since 1990, we propose therapeutic solutions in vascular surgery, oncology and digestive surgery. Our products meet the technical requirements practitioners demand everywhere ...
ISO Med - Thrombectomy Catheters Single Lumen
ISOMed Thrombectomy Catheters - single lumen are made with X.R.O. polyurethane. They are colour coded for easy identification. The specially designed latex balloon, fixed with two sutures, is perfectly symmetrical. ...
CONTACT SUPPLIER -
Manufacturerbased in Stenløse, DENMARK
Mermaid Medical Group is a privately owned company established in 2007. With our Nordic roots and headquarters in Denmark, we value cooperation, helpfulness, and openness. We develop, manufacture, and distribute medical devices to hospitals and end ...
D*Clot - Model HD - Rotational Thrombectomy System
The D*Clot HD is a fully disposable system that is ready to use. No assembly required. It is indicated for mechanical declotting of AV dialysis fistulae and ...
CONTACT SUPPLIER -
Manufacturerbased in Oaks, PENNSYLVANIA (USA)
VascuTech Medical, LLC has evolved from a consulting firm serving major customers such as C.R. Bard, to a contract manufacturer of FDA and ISO 13485 registered medical device manufacturer serving OEMs and healthcare providers in interventional ...
-
Manufacturerbased in Shanghai, CHINA
AccuPath Medical is a high-tech enterprise dedicated to manufacture materials and components of interventional as well as implantable medical devices. With capacities ranging from medical precision tubing, medical textiles, medical metal catheter ...
Medical Nickel-titanium arts Medical Push Rods
Medical nickel-titanium parts include conventional stents, valve stents, thrombectomy stents, close-mesh structural parts, and other parts. Medical push rods include (springs, tubes, and mandrels) welding structural push rods, ...
CONTACT SUPPLIER -
Manufacturerbased in Geneva, SWITZERLAND
ABCDx is a company headquartered in Geneva, Switzerland that discovers and develops diagnostic tools transforming care for patients with brain injuries. ABCDx’s devices help the healthcare professionals in the triage, diagnosis and treatment ...
LVOCheck - Biomarker
by mechanical thrombectomy, the mechanical removal of the thrombus operated with a ...
CONTACT SUPPLIER -
Manufacturerbased in Quincy, MASSACHUSETTS (USA)
BIOMODEX® was founded by Thomas Marchand and Sidarth Radjou in 2015 through Agoranov, a Paris based technology incubator. The company was founded with the intent to develop 3D printing based complex training and case specific rehearsal solutions for ...
Model EVIAS™Plus - An Ischemic Stroke Training Solution with both Femoral and Radial Access
Ischemic Stroke Cartridges, Multi-Use Type I/II/III Aortic Arches based on patient 3D rotational angiography, Right Femoral and Right & Left Radial Access, THROMBOTECH™ Hydrogel Synthetic Clot, Hard, Medium and Soft Textures, Lightweight, ...
CONTACT SUPPLIER -
Manufacturerbased in Rouen, FRANCE
Founded in 2009 by Philippe Bencteux, MD, Robocath designs, develops and commercializes robotic solutions to treat cardiovascular diseases. As an active player in the evolving medical robotic industry, these innovative solutions aim to make medical ...
-
Software vendorbased in Oxford, UNITED KINGDOM
We specialize in the creation of AI-powered imaging biomarkers to enable precision medicine for better treatment decisions. Since launching as a spin-out from the University of Oxford, we have developed award-winning, AI-powered imaging biomarkers ...
Brainomix - Version e-CTA - Advanced Solutions to Support Stroke Treatment Decisions
e-CTA is a CE-marked decision support software that uses advanced algorithms, artificial intelligence and large data analytics to automatically detect LVO and standardize the assessment of collaterals on CT ...
CONTACT SUPPLIER -
Software vendorbased in San Francisco, CALIFORNIA (USA)
Viz.ai was inspired by a patient who underwent a successful brain surgery and yet died because the surgery came too late. Systemic “ but preventable“ process delays had undermined the work of her care team. Frustrated by the unnecessary delays that ...
A.I. Viz LVO - Suspected Large Vessel Occlusions Detection
The only clinically validated technology indicated to automatically detect and triage suspected LVOs using AI. Uses AI to automatically detect and triage suspected large vessel occlusions across hub and spoke networks. AI Powered Suspected LVO ...
CONTACT SUPPLIER -
Manufacturerbased in Rehlingen-Siersburg, GERMANY
For over 40 years intra has experience in the production of special catheters for the most different departments: anaesthesiological wards, intensive care, departments of internal medicine, emergency medical care, paediatry, pneumology, vascular ...
Intra - Balloon Catheters
and ductal debries intraoperatively. The flush catheter (without balloon) is designed for irrigation after successful embolectomy, thrombectomy or ...
CONTACT SUPPLIER -
Manufacturerbased in Aliso Viejo, CALIFORNIA (USA)
In 1997 MicroVention was founded and incorporated in a small facility in Southern California. We are a worldwide community of over 2000 engineers, chemists, marketers, manufacturers, researchers, and innovators who share the same ethos - creating ...
SOFIA - Model Plus - Aspiration Catheters
The SOFIA Plus Catheter is designed for aspiration thrombectomy and offers an ideal combination of excellent distal trackability and a large 0.070" lumen to help with rapid recanalization of the affected ...
CONTACT SUPPLIER -
Manufacturerbased in Brunswick, AUSTRALIA
Avania is an integrated global, full-service CRO with specialized expertise in medical device, novel technology, and combination products. They advance products from feasibility all the way through post-approval trials in analytics, clinical trials, ...
-
Manufacturerbased in Fremont,, CALIFORNIA (USA)
We’re a company that creates solutions. More specifically, we design novel access device technology for vascular interventions and unmet clinical needs. Because in the precious seconds that surround a stroke emergency, clinicians need technology ...
Model Walrus - Balloon Guide Catheter Technology
I’m a balloon guide catheter specifically designed for stroke patients. Before I came along, balloon-based variable stiffness catheters weren’t used all that often, because all manner of technological constraints stood in the way. ...
CONTACT SUPPLIER -
Distributorbased in Corona, CALIFORNIA (USA)
For over 20 years, United Endoscopy has been a leader in providing state-of-the-art refurbished medical equipment and advanced equipment repair to its customers worldwide. Since its founding in 1996 by Jeremy Cooper, United Endoscopy has ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you