Ortho-Medical GmbH products

Ortho-Medical - Orlos In-Situ Pin Shear Cutter, 29 Cm 30-137.29

Shear 3 different pin diameters with 1 instrument. Double action design allows for ease in cutting. Grooved handles are ergonomically designed for a comfortable and secure grip. Shears 2.5mm [.098“] 3.0mm [.118“] and 3.5mm [.138“] diameter pins with ease and provides a clean cut without burrs or sharp edges.

Orlos Silicone - In Situ Rod Shear Cutter with Detachable Handles

Rods are sheared, leaving a smooth and clean surface rather than a sharp, jagged, burr - like surface common when using a standard pinching - type rod cutter. Rod cut by standard pinching-type rod cutter, Rod cut by ORLOS Silicone In Situ Cutter. The ORLOS Rod Shears easily cuts: 4.5mm [.177“], 5.5mm [.217“] and 6.35mm [.250“] diameter pins and rods.

Hand Instruments for Manicure, Pedicure & Hygiene

Hand instruments for manicure, pedicure and hygiene must meet high quality requirements. Only high-quality materials in first-class workmanship and a well thought-out design guarantee safety and comfort in handling. The manufacturing technology of the instruments, which is based on a symbiosis of high-tech and manual work, as well as a high vertical range of manufacture, enable model consistency and the highest precision in consistent quality. Depending on the model, an ins¬trument requires 60 or more work steps, with about two thirds of the work being done by hand. After all, ORTHO-MEDICAL has known for more than 25 years that there is nothing more economical than high quality.

General Surgery

The Ortho-Medical product portfolio comprises scissors, forceps, needle holders, suturing instruments, hemostatic forceps and clamps, wound hooks and wound retractors, instruments for bone surgery such as mallets, gouges, raspatory devices, files, vascular instruments and much more. Further information you will find in our General Instruments Catalogue and in our Taumatology & Instruments Catalogue. For special product information see our product sheets.

Traumatology & Orthopaedics

Humerus Interlocking Nail System

Implants for locking humeral nailing. System of implants: Material: titanium alloy Locking humeral nail, cannulated, diameter 7 - 8 - 9 mm. Locking screw, diameter 3,9 mm, End cup, Surgical set for locking humeral nailing

Distal Radius Plate System

The polyaxial locking volar distal radius plate provides a versatile fixing option for the treatment of wrist fractures. The plates‘ design warrants anatomical fitting. Our portfolio includes two plate forms; the first is a generally well-established form with a design to cover the most common fracture zone of the distal radius. It is distributed in three sizes: normal, medium, and small to optimize the treatment of more gracile and smaller wrists. The other type can be used for fractures extending to the styloid process of the radius.

Large Fragment System

ORLOS_II LOckING PLATE SYSTEM 4,5 - 5.0 MM • Angular stable • Locking or compression • Support biological osteosynthesis in case of osteoporotic bone and multiple fractures • Excessive torque is not applied to the cortical bone • Self-tapping locking screws • The bonefragments are are reliably fi xed in the position assumend at the time the screws are locked • Transfer of the physiological load from the bone to the plate

Neurosurgery

Aneurysm Clips

Labeling: Labels, showing the part number and serial number, as sure a clear identification of each clip. Additional labels can be attached to the patient`s records. Further information of the product (e.g. closing force, product description or maximum opening) is printed on the label of the outer packaging. Serial Number: Each clip is marked with an individual serial number. The serial number guarantees a detailed follow-up of the whole production process, the closing force and from the raw material to the final product. Closing Force: By using a computer controlled measuring equipment the closing force at one third of the jaw length and an opening of 1,0mm can be measured. Strict quality controls assure a constant closing force within the tolerance range. All relevant technical data is stored during the control procedure and printed on the label

Kerrison Design Punches

XXL shaft length available upon request. Its extralong version offers sufficient reserves for bridging the distance to the application site.