11 products found
S.P. Kinney Engineers, Inc. Products
-
Strainers
-
Kinney - Model A - Automatic Self-Cleaning Strainer
Kinney is most noted for our heavy-duty Model A and Model AP Automatic Self-Cleaning Strainers . Both models are designed for continuous removal of suspended particles from all types of liquids. The Model A is designed for operation under positive pressure (20 psi or greater). Pipeline sizes range from 2' - 60' and larger. Both models employ the use of a rotating cylindrical drum with a number of threaded holes containing one of many types of straining ...
-
Kinney - Model AP - Automatic Self-Cleaning Strainer (Low Pressure)
S. P. Kinney is most noted for our heavy-duty Model A and Model AP Automatic Self-Cleaning Strainers. The Model AP is designed for operation where the pressure is less than 20 psi. Both models employ the use of a rotating cylindrical drum with a number of threaded holes containing one of many types of straining media. The drum is supported on a rotating shaft fitted with bearings and is contained in a body having a vertical backwash slot opening adjacent ...
-
Kinney - Model AFW-1 - Automatic Self-Cleaning Strainer
The Model AFW-1 is S.P. Kinney’s light-duty Automatic Self-Cleaning Strainer. The Model AFW-1 is designed for operation where the pressure 20 psi and up. The strainer employs the use of a stationary wedge wire drum and a rotating cleaning ...
-
Kinney - Model FF - Custom Strainers
S.P. Kinney can custom design filtration packages for any application. S.P. Kinney offers a wide range of custom manual and automatic designs to meet any dimensional, pressure, or temperature requirements that a customer may ...
-
Kinney - Model AM - Light-Duty Manual Strainer
The Model AM is S.P. Kinney’s light-duty Manual Strainer that is similar in design to the Model A. The Model AM is designed for operation where the pressure 20 psi and up. The strainer employs the use of a manually rotated cylindrical drum with a number of threaded holes containing one of many types of straining media. The drum positioned against a vertical backwash ...
-
Blast Furnace Equipment
-
Kinney - Rubber Seated Butterfly Valve
Body: Steel body with integral flanges and shaft bearing housings. Flanges are drilled per ASA Standards. Wafer or flangeless designs can also be furnished. Valve is not manufactured to AWWA specifications.Shaft: One-piece stainless steel shaft, extending completely through the valve disc. Disc: Steel disc is fastened to the valve shaft by body bound bolts, positively secured in position by locking nuts. The disc hubs are machined flat at the points where ...
-
Kinney - Water Cooled Butterfly Valve
Totally Water Cooledfor temperatures to 2000 degrees F, Tight sealing removable airfoil design seat, Water cooled body, disc and shaft- with unique water channels, Sizes: 20″-120″, Horizontal or vertical installation, Manual, electric, pneumatic or hydraulic operation, Positive internal stops, Ideal for use in electric furnaces- for scrap pre-heat or discharge ...
-
Kinney - Model DDS - Hot Blast Valve
The Kinney-DDS hot blast valve is designed and service proven for continuous operation to stove dome temperatures. Stove change time is kept to a minimum as it takes only 10 seconds to open or close the valve. Compared to mushroom valve designs, less space is required, the pressure drop is negligible, costly piping and cable devices are eliminated; also the capital equipment cost is considerably less. The Kinney-DDS valve can also be used for backdrafting ...
-
Hydraulic Ram Goggle Valve
The valve is manufactured under exacting conditions to provide the finest quality of workmanship. It is ruggedly constructed of welded, fabricated steel. It is a self-contained unit and is so designed that no supports are necessary other than those normally required for supporting the ...
-
Kinney - Swing Goggle Valve
Simplified design, ruggedly and dependably built, easy to operate and economical to maintain – are the principal advantages of the Kinney Swing Goggle Valve. The valve will render an absolute tight shut-off in blast furnace, basic oxygen, open hearth or other gas mains. It is designed for vertical operation in a horizontal main – with rollers and other daptations provided for horizontal operation in a vertical main. When in the closed ...
-
Kinney - Water Cooled Burner Valve
Stove changing from 'gas' to 'blast' is now fast and safe, because of the Kinney Water-Cooled Burner Valve which has replaced the conventional burner door on many blast furnace stoves. The valve opens or closes in 10 seconds to complete the stove changing cycle, and incorporates electromechanical methods which insure maximum safety of operation. A number of patented features are incorporated in the valve. Completely steel fabricated and self-supporting, ...