8 products found
Wessels Company Products
-
Smart Tank Series
-
Wessels - Model NLA 35-800L-WG - Expansion Tanks
Wessels Type NLA-WG Smart Tanks are ASME removable bladder type pre-charged expansion tanks with WessGuard® bladder monitor. They are designed to absorb the expansion forces and control the pressure in heating/cooling ...
-
Wessels - Model Type FXA-WG - Hydropneumatic Tank
Wessels Type FXA-WG Smart Tanks are ASME removable bladder type pre-charge hydropneumatic tanks with WessGuard® bladder monitor. FXA tanks are commercial and industrial well and water systems, booster systems, or other potable water applications. They are designed to deliver water under pressure between pump cycles to provide sufficient flow to meet demands. The water is contained in a NSF Listed butyl bladder. If the bladder ...
-
HVAC Expansion Tank
-
Wessels - Model Type NLA - Bladder HVAC Expansion Tanks
Wessels type NLA removable bladder expansion tanks are designed for use in hydronic heating/cooling systems to absorb the expansion force resulting from the changes in temperature of the heating/cooling fluid. They’ve been intelligently designed to include a WessView bladder integrity monitor and integrated air-side pressure ...
-
Wessels - Model NTA Series: - Expansion Diaphragm Tanks
The diaphragm tank has been developed to allow the systems air cushion to be separated from the systems water. No waterlogging of the tank can occur as the air is held between the tank wall and the outside of a bladder placed inside the tank, while the system water is contained inside the bladder. This changes the system to an air elimination system, as any air extracted from the system water ...
-
Thermal Expansion Bladder Tanks
-
Wessels - Model TXA Series (ASME) - Thermal Expansion Bladder Tanks
Wessels type TXA tanks are ASME replaceable bladder type pre-charged thermal expansion tanks for commercial and industrial potable hot water applications. They are designed to be installed between a backflow preventer and a hot water heater so it can accept the expanded volume of hot water and keep the system pressure below the relief valve setting. The water is contained in a butyl bladder. All TXA expansion tanks can be installed vertically or ...
-
Expansion Tanks
-
Wessels - Model NLA Series - Bladder Expansion Tanks
Whale has led the way since way back in the ‘40s with ground breaking pump design through to recent innovation leaps in intelligent control electronic pump systems and gas / electric heating systems for water and space in recreational ...
-
Hydropneumatic Tanks
-
Wessels - Model FXA Series ASME) - Bladder Hydropneumatic Tanks
Bladder tanks are required in a closed loop heating or chilled water HVAC system to absorb the expanding fluid and limit the pressure within a heating or cooling system. A properly sized expansion or compression tank will accommodate the expansion of the system fluid during the heating or cooling cycle without allowing the system to exceed the critical pressure limits of the system. The expansion or compression tank uses compressed air to ...
-
Wessels - Glymatic System
Wessels Glymatic system consists of a free-standing solutions reservoir that contains the glycol/water or water solution at atmospheric pressure. A pressurization assembly is mounted on the solutions reservoir’s high density polymer cover, keeping the pressurization unit off the floor. The Glymatic automatic make-up package utilizes a pressurization station designed to draw fluid from a 6 or 15-gallon reservoir and automatically feed ...