Biopharmaceutical Surface Disinfectants Datasheet

Biopharmaceutical Surface DisinfectantsApplication Brief: Proven sporicides effective for use on hard surfaces in biopharmaceutical facilitiesMinntech, a leading manufacturer in disinfection technology, offers two powerful sporicides through Mar Cor Purification. Minncare® Cold Sterilant is a concentrated disinfectant and sterilant. Actril® Cold Sterilant is a Ready-To-Use disinfectant and sterilant with no dilution required. Both are proven effective for use against spores, bacteria, viruses and molds on hard surfaces commonly found in biopharmaceutical facilities. Surfaces made from non-porous materials such as plastics, stainless steel or glass can be disinfected using either product.Superior Biocidal Activity: Effective Against Spores, Bacteria, Viruses and Other OrganismsMinncare Cold Sterilant is a powerful disinfectant containing a proprietary mixture of 4.5% peracetic acid and 22.0% hydrogen peroxide. It is effective against a broad spectrum of organisms, including bacterial spores, fun-gal spores, bacteria, mycobacteria, yeast, molds and viruses. Actril Cold Sterilant is another powerful disinfectant in ready-to-use form containing a proprietary mixture of 0.06% peracetic acid and 1.0% hydrogen peroxide. It too is effective against a broad spectrum of organisms, including bacterial spores, fungal spores, bacteria, mycobacteria, yeast, molds and viruses.Neither Minncare nor Acrtil are systemic bactericides. Rather, they are powerful oxidizers that attack and break down the organic components of microorganisms, not just killing them, but destroying their structure. This makes Minncare and Actril some of the fastest acting and most effective disinfectants available. Both Actril and Minncare Cold Sterilants are registered with the US EPA as disinfectants and sterilants. Minncare has also been successfully tested according to European Norms for sporicidal, bactericidal, mycobactericidal, fungicidal and virucidal activity.Safe, with No Toxic Aldehyde VaporsMinncare and Actril Cold Sterilants protect employees from exposure to toxic aldehyde vapors. Although proper care must be taken when handling concentrated Minncare, in the use-dilution form, no exceptional handling procedures are required. Actril, with its ready-to-use form, requires no mixing and only minimal personal protection for use.Both Minncare and Actril have been shown safe through extensive testing for toxicity and effects on skin and mucous membranes.©2012 Mar Cor Purification. All rights reserved. P/N:50096-370 Rev.CVisit www.mcpur.com for more information or call 1-800-633-3080Mar Cor Purification14550 28th Avenue NorthPlymouth, MN 55447Tel: (484) 991-0220 Toll Free: (800) 633-3080Fax: (763) 210-3868Mar Cor Purification3250 Harvester Road - Unit 6Burlington, ON L7N 3W9Tel: (905) 639-7025Toll Free: (800) 268-5035Fax: (905) 639-0425Mar Cor PurificationSourethweg 116422 PC HeerlenThe NetherlandsTel: (+31) 45 5471 471Fax: (+31) 45 5429 695Mar Cor Purification 1A International Business Park, #05-01Singapore 609933Tel: (+65) 6227 9698Fax: (+65) 6225 6848Mar Cor Purification4450 Township Line RoadSkippack, PA 19474-1429Tel: (484) 991-0220 Toll Free: (800) 346-0365Fax: (484) 991-0230Actril Ordering InformationU.S. Part No. Canadian Part No. European Part No. Description Packaging176-02-046 78400-258 n/a Actril Cold Sterilant 1 liter CS6 6 x 1 liters per case176-02-043 n/a n/a Actril Cold Sterilant 4 US gallons 4 x 1 US gallons176-02-045 n/a n/a Actril Cold Sterilant 50 US gallons 50 gallons in 55 gal. drumn/a 78400-446 176-02-053 Actril Cold Sterilant 2 x 5 liters 2 x 5 litersn/a n/a 176-02-056 Actril Cold Sterilant 6 x 1 kg 6 x 1 kg3024980 78400-340 n/a Actril Cold Sterilant 6 x 1 liter Clean Room Packaging 6 x 1 liters per casen/a n/a 3024982 Actril Cold Sterilant 6 x 1 kg Clean Room Packaging 6 x 1 kg176-02-051 176-02-051 n/a Actril Cold Sterilant Spray Head for Liters 1 ea.185-40-008 78258-000 185-40-008 Actril Residual Test Strips 100 per vial185-40-009 78259-000 185-40-009 Actril 1% Test Strips 100 per vialLow ResidualsMinncare and Actril evaporate completely from surfaces, leaving very low residuals. Testing has shown that less than 0.5 ppm of hydrogen peroxide remains on the surface immediately after visible moisture is gone. Biodegradable with Easy DisposalBoth Actril Cold Sterilant and Minncare Cold Sterilant are biodegradable and will decompose into oxygen, water and acetic acid. They pose no threat to municipal waste treatment plants.** Unused Actril and Minncare Cold Sterilants are acidic and require normal neutralization as specified by your state and local regula-tions. A 1% solution of Minncare Cold Sterilant has a pH of 3.5. Actril has a pH of 1.5 to 2.0.Other InformationOther documents are available for your information. These include:• Minncare Cold Sterilant Research Data Report (50090-129)• Actril Cold Sterilant Technical Notes and Research Data Report (50090-287)• Minncare Cold Sterilant for Surface Disinfection Application Note (50096-371)• Actril Cold Sterilant for Surface Disinfection Application Note (50096-372)• Compatibility of Minncare Cold Sterilant and System Materials Technical Report (50096-318)• Testing of Minncare Cold Sterilant for Virus Inactivation Technical Report (50096-306)Minncare® and Actril® are registered trademarks of Minntech Corporation, a Cantel Medical CompanyMinncare Ordering InformationU.S. Part No. Canadian Part No. European Part No. Description Packaging176-01-001 78399-647 n/a Minncare Cold Sterilant 4 x 1 quart 4 x 1 quarts176-01-002 78399-646 n/a Minncare Cold Sterilant 4 US gallons 4 x 1 US gallons176-01-003 78399-648 n/a Minncare Cold Sterilant 40 US gallons 40 gallons in 55 gal. drumn/a n/a 176-01-125 Minncare Cold Sterilant 2 x 5 liters 2 x 5 litersn/a n/a 176-01-121 Minncare Cold Sterilant 2 x 10 liters 2 x 10 litersn/a n/a 176-01-129 Minncare Cold Sterilant 6 x 1 kg 6 x 1 kg185-40-004 78338-000 185-40-004 Minncare Residual Test Strips 100 per vial185-40-005 78339-000 185-40-005 Minncare 1% Test Strips 100 per vial