hip-arthroplasty Downloads
13 downloads found
Instrument system specifically designed for Direct Anterior approach Total Hip Arthroplasty. Lighted retractors can be attached to a fiber optic light cable with ACMI (female) connector. ...
Bipolar II can be used in hemi-arthroplasty which is indicated in the case of femoral neck fracture, trauma, and the early-stage avascular necrosis when the acetabulum remains ...
A self-retaining frame and retractor system designed for use during anterior total hip arthroplasty, the blades help retract the hip capsule and musculature, permitting an unobstructed view of the acetabulum while freeing an assistant ...
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. Detailed correlation can be seen in table below. ...
TheQRS Process is designed for outpatient knee and hip arthroplasty. ...
The Full XPE Cup is designed for cemented fixation in primary or revision hip arthroplasty. Made from XPE (Highly Crosslinked Polyethylene) material, the cemented cup is designed to provide optimal stability and improved longevity. The Full XPE Cup can be combined with a larger size femoral head to improve range of motion and reduce the potential for ...
The United Dual Mobility (UDM) Acetabular System is applied in a primary or revision total hip arthroplasty for acetabulum reconstruction. Based on two classic concepts, Sir Charnley’s low friction principle and the anti-dislocation theory by using larger femoral head diameter, the cobalt-chrome alloy-based UDM Acetabular System provides greater range of motion and superior jumping distance ...
All the cemented Acetabular Cups can be implanted via any standard approach for total hip arthroplasty, depending on the surgeon's level of experience. ...
U-Motion II is a comprehensive acetabular hip system offers a wide range of acetabular cup, liner, and femoral head prostheses options for primary and revision hip ...
The BIRMINGHAM HIP◊ Resurfacing (BHR◊) System is a conservative approach to hip arthroplasty in which an all-metal bearing couple is used to preserve, rather than replace, a patient’s femoral head and neck. It was first implanted in July 1997, and was approved for use in the United States by the Food and Drug Administration in 2006. Since its introduction, there have been over ...
The H1 is a contoured ceramic-on-ceramic hip resurfacing arthroplasty system. It consists of two monoblock implant components (femoral head and acetabular cup) made of BIOLOX®delta with vacuum-plasma-sprayed titanium and hydroxyapatite for cementless fixation. The contours of the H1 components are designed to better reflect the native morphology of the femoral head and acetabulum. The H1 is ...
The H1 is a contoured ceramic-on-ceramic hip resurfacing arthroplasty system. It consists of two monoblock implant components (femoral head and acetabular cup) made of BIOLOX®delta with vacuum-plasma-sprayed titanium and hydroxyapatite for cementless fixation. The contours of the H1 components are designed to better reflect the native morphology of the femoral head and acetabulum. The H1 is ...
The U2 Revision Stem is a monoblock fully Titanium Plasma Spray (TPS) coated cylindrical stem optimized for revision hip arthroplasty. The design rationale of the U2 Revision Stem is based on primary U2 Hip Stem. It shares in the same geometrical neck concept and also utilizes the tri-wedge geometry to achieve implant stability, similar to the primary system. However, the revision system offers a ...