Medical Diagnostics Applications

Premium

Track-Etched Polymer Membrane Filters for Diagnostics

Recovery of cervical cancer cells and isolation of circulating rare cells, detection and counting of bacteria recovered from food, beverage or cosmetics (flow cytometry, fluorescence microscopy), detection and analysis of recovered airborne particles (asbestos, AOX), ...

By it4ip S.A. based in Louvain-la-Neuve, BELGIUM.

Premium

Medical

Polimaster dosimeters are designed to ensure safety of medical personnel by providing accurate measurement of accumulated dose and recognizable alarms at threshold excess as well as maintaining the history of alarm events. Small dimensions, light weight, and user-friendly interface make the devices pleasurable to ...

By Polimaster Ltd. based in Minsk, BELARUS.

Premium

Gas analyzers for the medical industry

Impurities in air (chromaCO) or O2 or N2O. Formaldehyde or ETO or ...

By Chromatotec Group based in Val de Virvée, FRANCE.

Premium

Thin-film Measurement Technology for Medical Industry

The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the ...

By Innovative Sensor Technology AG (IST) based in Las Vegas, NEVADA (USA).

Premium

Chemiluminescense based analyzer for medical industry

Exhaled Nitric Oxide (FeNO) measurements are easy to perform and may be used to monitor eosinophilic airway inflammation (Asthma). A range of computerized pulmonary diagnostic products ranging from neonatology to adult pulmonary function testing are manufactured by ECO PHYSICS AG. These products are marketed and distributed by the label ECO ...

By ECO Physics AG based in Duernten, SWITZERLAND.

Premium

Incinerator solutions for the pathological sector

Pathological waste is basically the by-product from operations and other types of surgery. Incineration is still the recognised way to safely dispose of all kinds of pathological ...

By Inciner8 Limited based in Southport, UNITED KINGDOM.

Precision moisture analysis instruments for rapid moisture analysis for medical devices

Moisture content analysis for medical devices has never been easy. The resins are sophisticated and very expensive, the customers are demanding, and a minuscule cosmetic defect can mean the difference between thousands of dollars of saleable finished goods and scrap. When working with the complex, high-volatile-content materials that make up modern medical devices, every part per million counts, and every gram of resin counts. That’s why Computrac designed the Vapor Pro ...

By AMETEK Brookfield based in Chandler, ARIZONA (USA).

Underwater technologies for search & Safety sector

Get an extra eye underwater to add safety and efficiency to your search. We came up with ways to make your operations safer, to have more precise control over threats identification or during diving training. We developed a hybrid underwater system that can be used as a wireless drone or as a compact and agile tethered ROV. It comes with smart, in-house developed software that can be adapted to your specific ...

By Notilo Plus based in Marseille, FRANCE.

Gas analysis & monitoring systems for medical imaging

The molecules can be deliberately labeled with stable isotopes, in one or more positions, and since they are minimally discriminated in metabolic processes, may be used as a tracer in chemical and biological ...

By ETG Risorse e Tecnologia S.r.l. based in Chivasso, ITALY.

Medical Devices for Diagnosis and Evaluation

The diagnosis of heart failure typically starts when a patient talks to their caregiver about the signs and symptoms they are experiencing. Their health care provider may ask questions designed to confirm the causes of heart failure that may be in their medical history as ...

By Impulse Dynamics based in Marlton, NEW JERSEY (USA).

Plasmatherapies

The term plasmapheresis encompass different techniques (filtration or adsorption on plasma), which remove not all but only specific elements contained in the plasma, and altogether allow to treat a large number of diseases. ...

By Infomed SA based in Meinier, SWITZERLAND.

Microscope System for Molecular imaging of cancer

Longitudinal imaging of pancreatic cancer. Monitor in a minimally invasive manner both tissue morphology and fibrosis (fluorescein) and cathepsin activity (Prosense® 680). A very thin probe (S 650) was used to monitor the pancreas of the same mouse over 9 months. ...

By Mauna Kea Technologies based in Paris, FRANCE.

Gas analysis & monitoring systems for medical gases monitoring

The measurement of occupational exposure to pollutants in the operating room is an essential tool for the detection of chemical, linked not only to the occurrence of infections and various diseases, but also to reduced alertness and performance of staff. To meet the above requirements, ETG proposes the use of ‘INFRARUN, thanks to the high sensitivity and stability and the very wide dynamic range, INFRARUN is the ideal tool to make a continuous sampling in the short and long-term gaseous contaminants in the ...

By ETG Risorse e Tecnologia S.r.l. based in Chivasso, ITALY.

Pure Air Solutions for Healthcare

Nanoscale air decontamination for hospitals, clinics and laboratories. Genano Technology is scientifically proven to capture nano sized particles and eliminate 99,999% of microbes from indoor air. ...

By Genano Solutions Oy based in Espoo, FINLAND.

Periodontics

Dental laser treatment for periodontal disease was one of the first reasons why the technology was developed. Diode lasers are able to help destroy infectious bacteria and remove heavy amounts of ...

By PIOON based in Wuhan, CHINA.

Drug Dolution for Gastric Cancer

Gastric cancer is a disease in which cancer cells form in the lining of the stomach. Almost all gastric cancers are adenocarcinomas, a cancer that begins in glandular tissue. Gastric cancer is often in an advanced stage when it is diagnosed. At this stage, it can often be treated, but rarely ...

By Ascelia Pharma AB based in Malmö, SWEDEN.

Laser micromachining systems for medical device manufacturing sector

Laser micro processing is a technology that enables the manufacturing of components with micron accuracy. For the medical application such as stent therapy (especially in coronary heart disease), catheters, IOL (Intraocular Lenses), vascular clips, surgical staples, hollow needles, endoscopes, hypo tubes the highest micro material processing quality demands. Laser micromachining provides extremely gentle processing method that causes continuous growth of this industry. The ultrashort high-energy laser pulses allow ...

By ELAS, Ltd. based in Vilnius, LITHUANIA.

NBT - Navigated Brain Therapy System for Alleviating Chronic Neuropathic Pain Relief

At Nexstim we are using decades of scientific research to help alleviate drug-resistant brain diseases and disorders. As the world’s leading company combining TMS with 3D brain imaging, we offer a powerful noninvasive technique for the relief of chronic, refractory neuropathic ...

By Nexstim Plc based in Helsinki, FINLAND.

MouthLab - Mobile Monitoring System for Health Analytics Firms

Using Aidar Analytics, we aim to work with prominent data analytics and disease management companies to integrate our device into their unique software and analytics platform to achieve meaningful impact across the healthcare landscape. By leveraging our bespoke data capture platform and patient-level intervention strategies, analytics firms could integrate our system with their own internal capabilities or with other third-party solutions to design a comprehensive data suit to empower data-driven ...

By Aidar Health based in Baltimore, MARYLAND (USA).

Patients - Getting It All – Better Cancer Resections with FIRE – Guided Surgery

The Promise: With modern diagnostic and imaging technologies, cancer can be detected earlier than ever before. And with earlier detection comes the promise of a surgical cure—that is, the complete removal (or resection) of all tumor tissue from a patient. Research has shown that patients with surgical cures have fewer complications in recovery and a greatly enhanced survival rate when compared to patients who do not achieve surgical ...

By Akrotome Imaging, Inc. based in Cleveland, OHIO (USA).