Medical Management Applications

Premium

On-site oxygen generation solutions for medical industry

Maintain a secure and constant source of pure oxygen, produced directly at the hospital or care site, available when needed. The global demand for oxygen concentrators in the medical field is growing rapidly with the recent outbreak of the Coronavirus and is expected to keep growing. Oxygen concentrators are a highly reliable and economical solution for medical applications. OSI’s oxygen concentrators are safe, less expensive, and easy to ...

By Oxygen Solutions Inc (OSI) based in Edmonton, ALBERTA (CANADA).

Premium

Chemiluminescense based analyzer for medical industry

Exhaled Nitric Oxide (FeNO) measurements are easy to perform and may be used to monitor eosinophilic airway inflammation (Asthma). A range of computerized pulmonary diagnostic products ranging from neonatology to adult pulmonary function testing are manufactured by ECO PHYSICS AG. These products are marketed and distributed by the label ECO ...

By ECO Physics AG based in Duernten, SWITZERLAND.

$Determination of serum protein fractions$

Premium

Determination of serum protein fractions

INTRODUCTION The method allows determination of relative amou nts of albumin and globulins in human serum using capillary electrophoresis ...

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Determnation of albumin concentration in urine

INTRODUCTION The capillary electrophoresis method provides det ermination of albumin concentration in ...

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Thin-film Measurement Technology for Medical Industry

The medical industry requires the accurate and consistent performance of its equipment. IST’s precise and reliable sensors meet the needs of these applications. Flow is perhaps the most widely used sensor in this industry, controlling medical devices where a gas or fluid is being supplied to a patient, or in cases of patient monitoring. Humidity sensors also have an application in the medical industry in products that control the air present or supplied to the ...

By Innovative Sensor Technology (IST) based in Las Vegas, NEVADA (USA).

Premium

High quality detection solutions for disinfection industry

By AIRSENSE Analytics GmbH based in Schwerin, GERMANY.

Premium

Determination of a total mercury content in urine

INTRODUCTION The main way of mercury removal from human body is it s urinary excretion, which is an important diagnostic medium for screening examination of population, risk group determination, and diagnostics and treatment of mercury ...

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Thermoformed plastic solutions for medical industry

By providing the medical industry with innovative design services and cutting-edge manufacturing processes, Brentwood is able to produce thermoformed packaging and injection molded components that increase efficiency and reduce costs. Quality packaging and components for manufacturers that demand precision, innovation, and reliability from a full-service ...

By Brentwood Industries, Inc. based in Reading, PENNSYLVANIA (USA).

Premium

Gas analyzers for the medical industry

Impurities in air (chromaCO) or O2 or N2O. Formaldehyde or ETO or ...

By Chromatotec Group based in Val de Virvée, FRANCE.

Premium

Medical Waste Processing

Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has lots of experience in medical waste processing, we offer kinds of professional shredders to handle the processing. The medical waste can be shredded into uniform in size, which is smaller than 50mm to improve the incineration efficiency. Harden’s Medical waste ...

By Harden Machinery Ltd. based in Zhongshan City, CHINA.

Premium

Gas Sensor Solutions for Medical Ventilators and Concentrators

With more than 18 years’ application experience, Cubic could offer medical gas sensor products covering: ultrasonic oxygen sensors, ultrasonic oxygen and flow sensors (candidate alternatives for traditional zirconia oxygen sensor), NDIR medical EtCO2 sensors, DLCO gas sensors and lung function measuring ...

By Hubei Cubic-Ruiyi Instrument Co., Ltd. based in Wuhan, CHINA.

Premium

Air quality monitoring solution for operating room monitoring sector

Air quality monitoring solution for operating room monitoring ...

By Particles Plus, Inc. based in Stoughton, MASSACHUSETTS (USA).

Premium

Medical Waste Processing

Presently, Medical Waste Processing has different ways, such as sanitary landfill, incineration by pyralysis, autoclave sterilization, chemical disinfection, microwave sterilization, thermal decomposition, and plasma process, ect. Harden Machinery has ...

By Harden Machinery Ltd. based in Zhongshan City, CHINA.

Premium

Identification of drugs and medicines

INTRODUCTION At present, pharmacology, being an integral part of medical science, shows rapid development resulting in the discovery of ever growing number of new drugs and medicines. Hence, quality control and identification of drugs acquires vital importance as the number of counterfeited products inconsistent with Pharmacopoeia concurrently increases with the introduction of new numerous drugs. Identification of the drugs is necessary to reject the products that not only lack the required medicinal properties ...

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Cleaners for Medical devices industry

Our precision cleaners provide consistent results with every use and leave surfaces completely clean. Our products have long been used in pre-sanitization washes of implantable medical devices and prosthetics such as knees, hips, pins, screws, and tubing. Machining oils, burrs, metal fines, and other soils are easily removed from stainless steel, titanium, ceramic and other metal and plastic ...

By International Products Corporation based in Burlington, NEW JERSEY (USA).

Computerized instrumentation for the medical gas flow and scientific research

Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate gas mixes for any laboratory or clinical need. You can ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA).

Medical solutions for the ventilators and respiratory

A variety of medical devices, such as ventilators, breath analysis equipment and anesthesia delivery monitors require a quick and precise measurement of gas flow. Besides hospital applications, there is an increasing demand for gas flow control in home healthcare products, such as Continuous Positive Airway Pressure (CPAP) machines. Axetris mass flow meters and controllers are available for use with multiple gases such as O2, Air, He and CO2. The MEMS-based design of our mass flow devices offers key advantages ...

By Axetris AG based in Kaegiswil, SWITZERLAND.

Evaporators and concentrators for medicial plants processing

Recovery of alcohol and ...

By Eco-Techno SRL. based in Busnago MB, ITALY.

Indoor Air Quality Monitoring

Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying ...

By Edinburgh Sensors Ltd - a division of Edinburgh Instruments based in Livingston, UNITED KINGDOM.

Medical

Polimaster dosimeters are designed to ensure safety of medical personnel by providing accurate measurement of accumulated dose and recognizable alarms at threshold excess as well as maintaining the history of alarm events. Small dimensions, light weight, and user-friendly interface make the devices pleasurable to ...

By Polimaster Ltd. based in Minsk, BELARUS.