Lung Support Downloads
-
Griltex - Model GXP DREN 5+5 - Drainage Geocomposte and Foundation Wall Ventilation Membrane - Brochure
GXP DREN 5+5 is a combination of a membrane pressed from high density polyethylene (HDPE) with a welded polypropylene geotextile (ref. no. Typar SF32-40). The geocomposite forms a space constituting a perfect drainage layer and the reserve of geotextile 5 cm over the membrane prevents penetration of the filling into the upper section of the system. A structure of double embossings enables a ...
-
TrachStay - Stabilizes Ventilator Connector and Stabilizes In-Line Suction Devices - Datasheet
Sturdy, efficient device stabilizes ventilator connector; stabilizes in-line suction devices, too. The management of the tracheotomized patient supported with mechanical ventilation through a cuffed tracheostomy tube constitutes one of the clinician’s greatest responsibilities. Most patients that require a tracheostomy will need full to partial ventilatory support. There are several factors ...
-
Dynarex - Model HMEF - Hygroscopic Condenser Humidifier - Brochure
Dynarex Resp-O2 HMEFs are single-use respiratory devices designed to provide humidification and help prevent mucosal dryness during mechanical patient ventilation and other respiratory treatments. The integrated bacterial/viral filter reduces the risk of contamination and provides protection from airborne particles and microorganisms. ...
-
Training & Test Lung Training & Test Lung - Operation Manual
The Michigan Instruments’ Training and Test Lung (TTL) is a dynamic lung simulator commonly used to evaluate and demonstrate mechanical ventilation and phenomena. Simulation of pulmonary pathologies and the evaluation of ventilators are also among the many uses of the device. This manual provides the instructions to describe the mechanical function of the following lung models and provides ...
-
Sterimed - Silicon Elastomer Coated Endotracheal Tube Datasheet
Used to maintain a patient airway and mechanically ventilate patients, Made from a special non-toxic PVC coated with silicon elastomer which forms a bonded film over this tube and balloon. 100% Phthalate free. The tube is coated with non-stick, self-lubricating Silicon elastomer ( Elastosyl) which forms a thin film on the surface. Elastosyl reduces the coefficient of friction by 80%, Reducing ...
-
Sterimed - Endotracheal Tube Datasheet
The Sterimed endotracheal tube comes in two variants – Endotracheal Tube Cuffed and Endotracheal Tube Plain. The Sterimed endotracheal tube is made from non-toxic, non-irritant, medical grade clear PVC. The endotracheal tube, also known as the ET tube is used to maintain a patent airway and mechanically ventilate patients. The Sterimed endotracheal tube is kink resistant, thin-walled, ...
-
QuickLung - Test Lung for Ventilator Testing and Training Brochure
QuickLung® is an adjustable, precision test lung for ventilator testing and training. It is compact, easy-to-use, and capable of simulating a wide range of patient conditions, including patient inspiratory efforts. QuickLung is available in a an adult or pediatric model, both in calibrated or standard versions. Learn more in the “Options” section below. You can use QuickLung ...
-
QuickLung - Breather Brochure
Supporting the efforts of a spontaneously breathing patient is critical in mechanical ventilation. New ventilator modes continually strive to perfect the interaction with the patient. Training to fully utilize these modes requires simulating spontaneous breathing. ...
-
Purho - Ionizer System - Brochure
Made of stainless steel and are designed for use in an industrial environment.An array of Bioxigen condensers and quiet mechanical ventilation inside for more efficient sanitizing. ...
-
Dynarex - Heat Moisture Exchanger Filters (HMEF) - Brochure
Dynarex Resp-02 HMEFs are single-use respiratory devices designed to provide humidification and help prevent mucosal dryness during mechanical patient ventilation and other respiratory treatments. The integrated bacterial/viral filter reduces the risk of contamination and provides protection from airborne particles and ...
-
IntelliSync+ Keeping an eye on patient-ventilator synchrony - Brochure
Significant patient-ventilator asynchronies occur in more than 25% of all mechanically ventilated patients1, and are associated with increased work of breathing2, prolonged ventilation time1, and higher mortality3 . The well-trained eye of a ventilation expert is capable of detecting asynchronies by analyzing the waveform shapes of either the flow or the pressure waveforms. However, the expert ...
-
Adaptive Support Ventilation - Brochure
Hamilton Medical developed the Intelligent Ventilation mode Adaptive Support Ventilation® (ASV) to make mechanical ventilation easier to use for the caregiver, and at the same time safer and more comfortable for the patient. Therefore, ASV employs lung-protective strategies and adjusts ventilation automatically − breath by breath, 24 hours a day, from intubation to extubation. ASV also ...
-
Adaptive Support Ventilation ASV - Brochure
Hamilton Medical developed the Intelligent Ventilation mode Adaptive Support Ventilation® (ASV) to make mechanical ventilation easier to use for the caregiver, and at the same time safer and more comfortable for the patient. Therefore, ASV employs lung-protective strategies and adjusts ventilation automatically − breath by breath, 24 hours a day, from intubation to extubation. ASV also ...
-
Dolphin - Continuous Positive Airway Pressure (CPAP) System Brochure
Continuous positive airway pressure (CPAP) therapy supports the airways of preterm and low-birth weight newborns, who can breathe spontaneously but inadequately. It is a comfortable alternative to relatively invasive therapies, endotracheal intubation and mechanical ventilation. Dolphin CPAP system is designed to protect compromised airways, enhancing patient comfort and optimizing infant ...
-
Impala Ventilator Brochure
Impala ventilator is an invasive mechanical ventilator with 8 ventilation modes ACVCV, AC-PCV, SIMV-VC, SIMV-PV, VCV/ PS, PCV/PS, CPAP, BiPAP and HFNC intended to use in intensive care units or transportation of emergency patients. The device contains a built-in pump, blender, flow, and pressure sensors that allows oxygen-rich (>21% O2) air with accurate Fraction of inspired oxygen (FiO2), ...
-
Tecme - Model VH2100 - Heater Humidifier - Brochure
The VH-2100 humidifier is part of a comprehensive humidification system designed to deliver a comfortable level of humidity and temperature. The device is used for heating and humidifying gases delivered to patients that need invasive and non-invasive mechanical ventilation through endotracheal/tracheostomy tubes or a face mask, respectively. It can adjust up to nine levels of temperature and ...
By Tecme
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you