Showing results for: orthopedic device News
-
Field Orthopaedics Announces Plans to Debut Award-Winning Micro Screw at AAOS in Las Vegas
Field Orthopaedics, a rapidly growing Australian orthopaedic devices company that focuses on the design and manufacturing of orthopaedic devices to address the shortcomings in the trauma, extremities and biological markets, today announced plans to showcase its FIELD MICRO SCREW SYSTEM at the 2019 American Academy of Orthopaedic Surgeons Annual Meeting in Las Vegas on March 12- ...
-
ASTM F1839 - 08e2 standard specification for rigid polyurethane foam for use as a standard material for testing orthopedic devices and instruments
This specification covers rigid polyurethane foam blocks or sheets recommended for use as a standard material for mechanical testing using orthopedic devices and instruments. Although the physical properties of the foam are in the order of those reported for human cancellous bones, these materials are not intended for ...
-
On the road to IPO, Field Orthopaedics raises $5m for push into US
The rapidly growing Australian orthopaedics devices company, Field Orthopaedics (FO) has just completed a fresh round of fundraising, equipping it with $5million in new capital for a push into the US$11billion trauma and extremities market. As one of the fastest growing market sub-sectors, at a rate of 7-10% per annum, hand and wrist orthopaedics is now around 40% of the upper extremities market. ...
-
Demand for Brisbane Medical Micro Screw Creates Waitlist Before Official US Launch
The Brisbane medical innovation of the world’s smallest cannulated compression screw by Field Orthopaedics is in high demand in 20 US states before it’s official launch at the American Academy of Orthopaedic Surgeons (AAOS) Annual Meeting from March 12 to 16 in Las Vegas, USA. Hospitals and distributors in 10 US states have requested access to the product before its official launch ...
-
Sawbones and Numalogics Launch New Strategic Partnership
Montreal, Canada, September 21, 2021, Pacific Research Laboratories, Inc., the parent company to Sawbones® and Numalogics Inc., a subsidiary of Spinologics Inc., have partnered to develop computational modeling and simulation software applications for the orthopaedic medical device industry. In an ever-competitive space, orthopaedic medical device manufacturers look to bring products to ...
-
Field Orthopaedics announced as Finalist in Lord Mayor’s Awards
Field Orthopaedics is proud to have been recognised as a finalist for the ‘HSBC Award for Excellence in International Business’ in the 2021 Lord Mayor’s Awards, an initiative of the Brisbane City Council where the FO headquarters are based. The awards attract thousands of entries each year, highlighting the calibre of Field Orthopaedics’ submission and the success of the ...
-
Australian Medical Micro Screw Innovation Makes World Debut in 30 Jan 2019 Brisbane Operation
An innovative Australian micro screw created to help significantly reduce complications in the management of orthopaedic injuries and the fixing of fractures in the hand and wrist will be used in a world-first operation in Brisbane by internationally-renowned hand surgeon Dr Greg Couzens on Wednesday 30 January. The Field Micro Screw by Brisbane med-tech start-up Field Orthopaedics has already ...
-
ASTM F2066 - 11 standard specification for wrought titanium-15 molybdenum alloy for surgical implant applications (UNS R58150)
This specification covers the chemical, mechanical, and metallurgical requirements for wrought titanium-15 molybdenum alloy to be used in the manufacture of surgical implants. The product shall be classified as: strip; sheet; plate; ...
-
ASTM F620 - 11 standard specification for titanium alloy forgings for surgical implants in the alpha plus beta condition
This specification covers alpha plus beta titanium alloy forgings for use in surgical implants such as orthopaedic medical devices. The products should be forged by hammering, pressing, extruding, or upsetting bars or wires and should be free of ...
-
ASTM F2267 - 04(2011) Standard Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
Intervertebral body fusion devices are generally simple geometric shaped devices, which are often porous or hollow in nature. Their function is to support the anterior column of the spine to facilitate arthrodesis of the motion segment. This test method is designed to quantify the subsidence characteristics of different designs of intervertebral body fusion devices since ...
-
Scottish medical device business completes oversubscribed funding round
Clear Surgical, an ambitious Scottish based medical device business, has secured £280,000 of new investment from existing shareholders, in an oversubscribed funding round. Led by the investment syndicate Kelvin Capital, and with Scottish Health Innovations Ltd (SHIL) and Scottish Investment Bank participation, the funding round will support the development of new advanced surgical devices ...
-
ASTM F2038 - 00(2011) Standard Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I—Formulations and Uncured Materials
4.1 This guide is intended to provide guidance for the specification and selection of silicone materials for medical device applications. Silicone manufacturers supplying materials to the medical device industry should readily provide information regarding non-proprietary product formulation to their customers either directly, or ...
-
ASTM F1295 - 11 standard specification for wrought titanium-6aluminum-7niobium alloy for surgical implant applications (UNS R56700)
This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed, cold worked, or hot rolled titanium-6aluminum-7niobium alloy (UNS R56700) bar and wire to be used in the manufacture of surgical implants. Titanium mill products covered in this specification shall be formed with the conventional ...
-
ASTM F1378 - 12 Standard Specification for Shoulder Prostheses
This specification covers shoulder prostheses for total or hemiarthroplasty used to provide functioning articulation by employing glenoid and humeral components. The prostheses may be constrained, partially constrained, or unconstrained. Modular prostheses are included in this ...
-
ASTM F136 - 11 Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
This specification covers the chemical, mechanical, and metallurgical requirements for wrought annealed titanium-6aluminum-4vanadium ELI (extra low interstitial) alloy (R56401) to be used in the manufacture of surgical implants. The products are classified into: strip, sheet, plate, bar, forging bar, and wire. The heat analysis shall conform to the ...
-
Mundomedis Portfolio Company Tennessee Medical Innovations INC, USA, Announces Acquisition of the Assets of Insightra Medical INC.
Mundomedis announced it has closed on the acquisition by its wholly-owned portfolio company, Tennessee Medical Innovations INC. (TNMI), of substantially all assets of Insightra Medical Inc., as a US-based medical device manufacturer. Insightra Medical was founded in 2001 and develops, manufactures and markets innovative medical devices for orthopedic, cardiovascular and hernia related medical ...
-
ASTM F2091 - 01(2012) Standard Specification for Acetabular Prostheses
This specification covers acetabular resurfacing devices used to provide a functioning articulation between the bones of the acetabulum and the femur. Acetabular prostheses included within the scope of this specification are intended for mechanical fixation between the prosthesis and host bone, by the use of bone cement ...
-
Odev to Establish Joint Venture Company in China
Ortho Development Corporation (ODEV) is pleased to announce the signing of an agreement with Changzhou Waston Medical Appliance Co., Ltd. (WASTON) for the establishment of a joint venture company in the People’s Republic of China. WASTON is an orthopedic device manufacturing company located in the city of Changzhou, Jiangsu Province. WASTON’s primary business focus is the ...
-
FDA Clears First Nanotechnology Peek Devices for Spinal Intervertebral Fusion
NASHUA, N.H.–(BUSINESS WIRE)–Vallum Corporation, a medical device company, today announced that it has received clearance from the U.S. Food and Drug Administration (FDA) to market a polyetheretherketone (PEEK) spinal interbody fusion device with a PEEKplus® nanotextured1 surface created by Vallum’s proprietary and patented Accelerated Neutral Atom Beam (ANAB) technology. ...
-
First Successful Hip Replacement Surgeries Completed with New Libertas Taper Reduced Uncemented Fem
Norristown, PA (USA) June 25, 2020: Maxx Orthopedics, Inc., a rapidly expanding global orthopedics device company, announced today the commercial launch and first successful surgeries of its new Libertas® Taper Reduced Uncemented Femoral Stem, the latest addition to its hip system. The Libertas Taper Reduced Uncemented Femoral Stem (Libertas TR®) is a press fit, double tapered stem ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you