Pre-Clinical Applications

Premium

Identification of drugs and medicines

INTRODUCTION At present, pharmacology, being an integral part of medical science, shows rapid development resulting in the discovery of ever growing number of new drugs and medicines. Hence, quality control and identification of drugs acquires vital importance as the number of counterfeited products inconsistent with Pharmacopoeia concurrently increases with the introduction of new numerous drugs. Identification of the drugs is necessary to reject the products that not only lack the required medicinal properties ...

By Lumex Instruments Group based in Mission, BRITISH COLUMBIA (CANADA).

Premium

Air quality monitoring solution for operating room monitoring sector

Air quality monitoring solution for operating room monitoring ...

By Particles Plus, Inc. based in Stoughton, MASSACHUSETTS (USA).

Premium

Gas Sensor Solutions for Medical Ventilators and Concentrators

With more than 18 years’ application experience, Cubic could offer medical gas sensor products covering: ultrasonic oxygen sensors, ultrasonic oxygen and flow sensors (candidate alternatives for traditional zirconia oxygen sensor), NDIR medical EtCO2 sensors, DLCO gas sensors and lung function measuring ...

By Hubei Cubic-Ruiyi Instrument Co., Ltd. based in Wuhan, CHINA.

Cleaners for Medical devices industry

Our precision cleaners provide consistent results with every use and leave surfaces completely clean. Our products have long been used in pre-sanitization washes of implantable medical devices and prosthetics such as knees, hips, pins, screws, and tubing. Machining oils, burrs, metal fines, and other soils are easily removed from stainless steel, titanium, ceramic and other metal and plastic ...

By International Products Corporation based in Burlington, NEW JERSEY (USA).

Computerized instrumentation for the medical gas flow and scientific research

Environics gas mixing, blending and dilution systems provide for precise mixing of gases for a wide variety of clinical applications. Our systems can produce gas concentrations from percent to ppb levels for single or multi-point calibration. The high accuracy of our mixers make them the units of choice for a wide variety of laboratory and research applications. For example, Environics Biological Atmosphere Incubation Mixers provide stable and accurate gas mixes for any laboratory or clinical need. You can ...

By Environics, Inc. based in Tolland, CONNECTICUT (USA).

Indoor Air Quality Monitoring

Accurate control of critical indoor environmental parameters is not only essential for the well-being and comfort of building occupants, but also has a major impact on energy efficiency. A multitude of parameters can affect indoor air quality (IAQ) from gases such as carbon dioxide (CO2), carbon monoxide (CO) and volatile organic compounds to particulates, humidity and bacteria such as legionella. CO2 is one of the greatest variables affecting indoor environmental quality since it is produced by people occupying ...

By Edinburgh Sensors Ltd - a division of Edinburgh Instruments based in Livingston, UNITED KINGDOM.

Gas analysis & monitoring systems for medical imaging

The molecules can be deliberately labeled with stable isotopes, in one or more positions, and since they are minimally discriminated in metabolic processes, may be used as a tracer in chemical and biological ...

By ETG Risorse e Tecnologia S.r.l. based in Chivasso, ITALY.

Independent particle characterization services for medical devices industries

Advances in biomedical implant and device technology continue to present new challenges in the area of physical testing. Particle Size Distribution, Surface Area and Porosity measurement data are invaluable to the biomedical researcher. PTL partners with each client to design projects that provide this needed information while controlling the costs of research. Applications have included particle size analysis of wear particles in fluid submitted from implant fatigue studies and pore size analysis of tricalcium ...

By Particle Technology Labs based in Downers Grove, ILLINOIS (USA).

Environmental & power monitoring equipments for medical applications

It is imperative that medical environments are closely monitored and logs are stored for analysis and auditing purposes. Jacarta monitoring products are used by medical organisations in two main ways: Firstly, Jacarta devices and sensors are used to monitor conditions where no sensors are currently deployed. A range of high-quality sensors are available to monitor a variety of temperature ranges – from ambient room temperatures down to extreme temperatures found in some research and testing facilities. ...

By Jacarta Ltd. based in Marlborough, UNITED KINGDOM.

PTR-MS systems for medical applications

PTR-MS are powerful tools for non-invasive, real-time breath gas analysis with many applications, such as screening for disease markers, study of pharmacokinetics or metabolic ...

By Ionicon Analytik Ges.m.b.H. based in Innsbruck, AUSTRIA.

Strategic market research solutions for emergency medical services

Leading the public safety market with publications, websites, conferences and custom publishing, PennWell EMS group serves professionals in EMS worldwide. JEMS (Journal of Emergency Medical Services) and the EMS Today Conference and Exposition are the leading providers of information for the improvement of patient care in the prehospital setting. We achieve our mission by delivering the latest and most reliable information through clinical breakthroughs, compelling case studies, management perspectives, legal ...

By PennWell Corporation based in Tulsa, OKLAHOMA (USA).

Zonisamide

BOC Sciences is committed to supplying cost-effective products and services. We provide Zonisamide (Cas No:68291-97-4). More information, please visit the website: http://www.bocsci.com/zonisamide-cas-68291-97-4-item-75118.html ...

By BOC Sciences based in Shirley, NEW YORK (USA).

Ativa - Diagnostic Workstation for Covid-19

ATIVA’s rapid low-cost COVID-19 test may provide earlier detection and a safer community. The greatest challenge we face is the spread of infection before symptoms appear. We all want to protect our loved ones, so how do we know if we are carrying the virus? Physical symptoms (fever, cough) appear too late to stop the spread. The nasal swab PCR tests suffer from sampling errors, slow time to results, and are expensive. Early detection of infected people is the key to protecting our most vulnerable people in ...

By Ativa Medical based in Shoreview, MINNESOTA (USA).

Engineering Discogenic Cells

DiscGenics uses its patented allogeneic cell culture manufacturing technology to isolate cells from donated adult human intervertebral disc tissue and induce a progenitor state. These proprietary Discogenic Cells are then expanded for therapeutic application, combined with a delivery vehicle and cryopreserved for off-the-shelf ...

By DiscGenics, Inc. based in Salt Lake City, UTAH (USA).

IDCT for Lumbar Disc Degeneration

The first product candidate to utilize the Discogenic Cell platform is IDCT ...

By DiscGenics, Inc. based in Salt Lake City, UTAH (USA).

Seamless from Cryo to Injection

Cryopreservation, cold-chain logistics, thawing, and mechanics for injection of biologic therapeutics — particularly a cell therapeutic, or “living medicine” — each bring their own challenges and risks. We are utilizing the ProFusion™ Therapeutic Infusion Needle & Compass® CT technologies (Cook Regentec) for efficient intramuscular cell ...

By Vascugen Inc. based in Madison, WISCONSIN (USA).

Precision Therapeutics Platform

Locus has built an automated, generalizable platform that is systematically unlocking the power of bacteriophage and CRISPR-Cas3 across multiple therapeutic ...

By Locus Biosciences, Inc. based in Morrisville, NORTH CAROLINA (USA).

Early Access to Medicine

Zynerba is dedicated to developing innovative transdermal pharmaceutically-manufactured cannabinoid treatments for patients with significant unmet medical needs. To do this, we conduct clinical trials to assess the safety and efficacy of investigational medicines. If proven in clinical trials we can obtain the necessary approvals from regulatory authorities to provide patients with broad access to these medicines. In some circumstances, patients with serious or life-threatening diseases or conditions who do not ...

By Zynerba Pharmaceuticals, Inc. based in Devon, PENNSYLVANIA (USA).

Heliox Ventilation

Heliox has been used in a medical context since the 1930s, and was first introduced as a possible treatment for cardiopulmonary disease in 1935. Although the medical community adopted its use initially to alleviate the symptoms of upper airway obstruction, its range of medical uses has since expanded greatly, most of which are dependent on the low density of the gas. Recent increased interest in Heliox has stimulated new, worldwide ...

By eVent Medical based in Lake Forest, CALIFORNIA (USA).

Solutions for Clinical Research

High-sensitivity and simultaneous analysis of Psychoactive drugs using LC-MS/MS with full-automated pretreatment ...

By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).