For adult and pediatric patients
One-button Operation
5“ full-touch screen
Weight < 1 kg
External Device Support
two USB ports and one microSD card slot
connectable to barcode scanner, external printer, USB Memory Drive as well as microSD card
for data transmission – LAN, build-in Wi-Fi, built-in GSM/GPRS cellular modem
exports ECG reports in – PDF and optional SCP, XML, DICOM
with a fully charged battery, can work up to 8.5 hours
Lead: 12 standard leads
Time constant: ≥3.2s
Frequency Response: 0.01Hz ~ 300Hz (-3dB)
Sensitivity: 2.5mm/mV, 5mm/mV, 10mm/mV, 20mm/mV, 10/5mm/mV, 20/10mm/mV, AGC
Input Impedance: ≥50MΩ (10Hz)
Input Circuit Current: ≤0.01μA
Noise Level: ≤12.5 µVp-p
Filter: EMG-Filter: 25Hz/35Hz/45Hz/Off
DFT-Filter: 0.01Hz/0.05Hz/0.32Hz/0.67Hz
AC-Filter: On/Off
LOWPASS-filter: 300Hz / 270Hz / 150Hz / 100Hz / 75Hz
CMRR:
Safety Standarts: IEC 60601-1:2005/A1:2012 EN 60601-1:2006/A1:2013 IEC 60601-1-2:2014 EN 60601-1-2:2015 IEC 60601-2-25:2011 EN 60601-2-25:2015
Power Supply: Operating voltage =100V–240V~
Operating frequency = 50Hz / 60Hz
Power adapter output voltage: 19V, 2A
Built-in Li Battery: Rated voltage = 14.8V, Rated capacity = 2500mAh
When the battery is fully charged, the 3-channel electrocardiograph can work normally about 8.5 hours. It can continuously record about 5 hours in Manual mode, and record at least 500 reports at most in the AUTO mode.
Necessary Charge time: ≤ 3.5 hours
Recorder: Thermal dot-matrix recorder
Printing density: 8 dots per mm / 200 dots per inch (amplitude axes)
40 dots per mm / 1000 dots per inch (time axes, @ 25 mm/s)
Record paper: 80mm x 20m (rolled thermal paper)
80mm×70mm×200pages (folded thermal paper)
Paper speed: 5; 6.25;10;12.5;25;50mm/s ± 3%
Dimension: 224 mm×143 mm×54 mm, ±2 mm
Weight: <1kg
Display: 800×480 LCD Screen