Magellan-2200 - Model 1 - Anesthesia Machine
From Anesthesia Machines
The Magellan-2200 Model 1 is compact, robust and flexible, easy to move and was designed for military field hospitals, general civilian hospitals, office-based anesthesia and surgery centers of every description. The Magellan-2200 Model 1 is pneumatically powered and may be mounted on a table top or mobile cart. The Magellan-2200 Model 1 is designed as a simple to operate unit containing all of the modes and necessary components to deliver a basic anesthetic, including a mechanical ventilator and a single agent vaporizer. All of the safety systems required are employed onboard and easy to utilize. Physiologic monitoring of the operators choice, may be employed as a separate, but necessary device. In standard use, the Magellan-2200 Model 1 may be used with a variety of face masks, endotracheal/tracheostomy tubes and other approved artificial airways that are a standard in any operating theater.
Specifications
Height | 23 inches | |
Depth | 23 inches | |
Width | 17 inches | |
Weight | ||
Free-Standing | 45 LBS | |
Fully Enclosed | 100 LBS | |
Case Material | Military Grade Plastic | |
All other Materials | Aluminum, brass and plastic | |
Operating Temperature Range | 35 to 110 degrees, F. | |
Gas Supply Sources 02 Main and Cylinders Air and/or Air Compressor Oxygen Concentrator |
38-70 psi (50 psi is optimal) 38-70 psi (50 psi is optimal) 3-10 psi |
|
Flowmeter Fresh Gas Flow | 1 to above 20 lpm (each flowmeter) | |
Oxygen Flush Valve | Recessed, self-closing, push button color coded and labeled, provides 45-55 lpm contant. flow while push-button is depressed | |
CO2 Absorber System | King Systems KAB-9, (re-fillable) or KAB-1 (pre-filled/disposable) | |
C02 Absorber Canister Capacity | 400 grams soda-lime | |
Directional Valves | Built-in the CO2 absorber | |
CO2 Absorber Holding Bracket | Plastic, secured with knob to main frame of machine. | |
Bag-Ventilator Switch/PRV and Scavenger Outlet Port | Hand-operated selector switch and rotating knob for PRV and scavenging outlet. | |
Bellows | Latex free, upward inflating, range from 0 to 1.6L |
|
Bellows Pressure Relief | Pre-set at 60 cmH20 | |
Common Gas Outlet | Size indexed, quick connect | |
Tubing Circuit | King Systems F-360-61 or any standard anesthesia circle circuit | |
Gas Pressure Hoses | DISS/thread indexed, female connectors at both ends | |
Gas Inlet Manifold | DISS/thread indexed, male connectors with one-way valves | |
Oxygen and Air Supply Gauges | 0-3000 PSI reading color coded and clearly labeled |
|
Gas Inlet Manifold Filters | Located behind Manifold Air and O2 inlet male connectors. | |
Gas Inlet Pressure Regulators Main Supply Cylinder Safety back up Cylinder |
0-3000 PSI reading color coded and clearly labeled DISS/thread indexed for O2 Pin indexed, yoke mounted for “D” and “E” cylinders for 02 |
|
Oxygen Supply Alarms | ||
Main and Safety back-up | Pneumatically actuated when O2 supply falls below 35 psi | |
Alarm power source | 9-volt battery located in body of alarm box | |
Alarm on/off | Labeled toggle switch located on body of alarm box. | |
Air and O2 Flowmeters | Calibrated and scaled 0-10 LPM color coded. O2 flowmeter has a fluted control knob for easy identification by touch | |
Oxygen Concentrator | To power O2 flowmeter only | |
Air Compressor | May be used to power ventilator and air flowmeter | |
Oxygen Analyzer/Monitor | OM-25-ME (or equivalent) Sensor life expectancy 2 years under normal conditions | |
Oxygen Analyzer Power Source | 2 each AA batteries, life expectancy approx. 3000 use hours | |
Auxillary O2 Flow Selector | Scaled 0-10 LPM in set increments, used for pre/post anesthesia | |
Vaporizer | Penlon SigmaDelta Series, bolt (cage) mounted, temperature compensated, very low maintenance | |
Airway Pressure Gauge | Dual scaled in cmH20 and mmHg, located on front panel of ventilator | |
Pressure Gauge Tubing | Attached to bag/vent switch arm | |
Mechanical Ventilator | Pneumatically powered, time cycled, volume constant, pressure variable | |
Volume Range | 0 to 1.6 L | |
Insp. Flow Range | 0 to .90 lps | |
Insp. Time Range | 0.2 to 3.0 seconds | |
Exp. Time Range | 0.2 to 30 seconds | |
Ventilator Gas Power Requirements | 40 to 70 psi, 50 psi optimal Use toggle switch to select gas source |
|
Waste Gas Scavenger | Positive and negative relief valves, 1 L reservoir bag, vacuum control knob | |
Total Machine Gas Leakage | @ 30cm H2O @ 80cm H2O |
0ML/min 0ML/min |
Internal System Compliance | @ 20cm H2O @ 40cm H2O |
1.1ML/cm H2O 1.3ML/cm H2O |
Internal System Resistance | @ 1.0L/sec gas flow @ 0.5L/sec gas flow |
4.11cm H2O 1.80cm H2O |
APL Valve Pressure Drop | @ 3.0L/min gas flow @ 30L/min gas flow |
0.12cm H2O 1.03cm H2O |
Storage | ||
Indoor | + 160 °F Allow unit to warm to room temp. | |
Indoor Outdoor |
-30 °F Allow unit to warm to room temp. |
Customer reviews
No reviews were found for Magellan-2200 - Model 1 - Anesthesia Machine. Be the first to review!