Ansen Orthopedic Casting Tape
It has the features like strength,light weight,fast hardening,good air-permeability, good X-ray radiolucency,easy operation,comfortable & safe adn less powder is produced when removed etc.
-
Most popular related searches
Operation of Orthopedic Castion Tape
A.Wear surgical gloves, select the roll of proper size. Apply stockinet or protective padding over the affected body part
B.Open the package, immerse the roll of cast in room temperature water (2fC-24°C) for 4-6 seconds, and squeeze 2-3 times to complete penetration of water into the roll, take it out and squeeze water off. (The temperature of water is proportional to set time. The higher temperature shorten the set time, while the lower temperature lengthens it Temperature of water warmer than 27'C ,obviously shorten the set time, hardly for the surgery.)
C.Apply Ansen Splint to the injured parts, and wrap by common bandage or elastic bandage. keep proper tension, excessive tightness will affect the blood circulation of injured parts. The strength can be determined by the number of layers used. The more layers, the stronger. Just 3-4 i layers provide a strong non-weight-bearing cast and 5-6 layers are typically adequate for weight-bearing cast. Additional layers, need to keep a proper adhesion.
D.Ansen splint should be operated within 3 to 5 minutes after immersion in the temperature water. Overtime will affect the adhesion and molding. Within 10 minutes after the molding, injured parts can not move before the sufficient cure of splint. Bear weight after 20-30 minuets. Cast trimmed or removed with electric plaster saw equipment
Customer reviews
No reviews were found for Ansen Orthopedic Casting Tape. Be the first to review!