Show results for
Refine by
Medical Equipment & Supplies In In Eritrea
7 equipment items found
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HCT hydrophone offers a reliable solution to characterize and monitor the acoustic properties of cavitation vessels, like ultrasonic cleaners. Its unique single point sensing design allows measurements with high spatial resolution to offer true 3-dimensional mapping of the cleaning tank. The rugged construction allows routine mapping of the acoustic pressure and ultimately determination of ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HM Series membrane hydrophones are designed for measuring pulsed ultrasound fields. Their extremely flat sensitivity results in the best reproduction of acoustic waveforms. Version A is the traditional hydrophone configuration, and a more rugged version B prevents membrane vibration during scanning motion. Version A is recommended for high power ultrasound work, where the absorption of energy ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The AIMS III offers the right balance between versatility and easy-to-use operations to meet the most advanced requirements in R&D characterization, regulatory testing, and production QC. The system is commonly used to characterize and validate transducer designs. Features such as the 5 axis motion, various firing/measuring orientations, and real-time plotting make it the tool of choice to ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HNP Series needle hydrophones are excellent sensors for laboratory use in ultrasonic field mapping, with pinpoint access and good spatial resolution. While they have lower sensitivity than the HNC series, these hydrophones have a flatter response and better ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
Designed specifically for easy Ultrasound Power measurements on medical devices, the RFB-2000 requires little maintenance and no complex correction factors, and is compliant with regulatory requirements including AIUM-NEMA UD-2, UD-3, IEC 61161, and with associated IEC standards. Automation assures reliable means to validate Acoustic Output measurements as recommended by AIUM-NEMA document ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
Designed to meet the need for a stable reference source in laboratories, the PCS-1000 serves as a trustworthy reference to regularly check the health of an acoustic measurement system. While representing your diagnostic imaging source, the PCS consists of a certified electronics controller and transducer that produces a known acoustic output. The PCS is calibrated in full compliance with ...
Manufactured by:Onda Corporation based inSunnyvale, CALIFORNIA (USA)
The HGL hydrophone has been established as a workhorse for diagnostic level measurements, providing the best mix of frequency response, reflection profile, and aperture size. The HGL Series hydrophones were designed to meet or exceed recommendations of section 3.3.2 of the AIUM Acoustic Output Measurement Standard (May 1998). They have an exceptionally flat sensitivity in a small and sturdy ...