- Home
- netherlands antilles
- Equipment
Rti Medical Equipment & Supplies In In Netherlands Antilles
32 equipment items found
Manufactured by:RTI Group AB based inMölndal, SWEDEN
Designed to comply with the needs of QA in modern X-ray departments. The RTI Light Probe measures the brightness on monitors with the same spectral response as the human eye. With a monitor and a lux adapter, the RTI Light Probe measures the brightness on monitors and film viewing boxes and the ambient light in the room. It has the same spectral response as the human eye! This makes it reliable ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The GE Vascular Holder is designed for accurate positioning of the Piranha and Barracuda Dose Probes on the GE Vascular ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
For vertical and/or horizontal exposures with Dose Probe. The RTI Dose Probe Flexi Stand will normally be placed on the patient’s table. It is developed for use with RTI Dose Probe, for vertical and/or horizontal exposures. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI provides a range of adapter cables. These enable you to connect many different types of ionization ...
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
Non-bone tendons are sterilized through the BioCleanse Tissue Sterilization Process without the use of irradiation. Non-bone tendons used in ACL reconstruction procedures allow for multiple fixation ...
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
Whole bones are used as a sterile source of cortical and cancellous bone. These implants may also be used in procedures that restore segmental and critical bone loss in the extremities due to trauma, bone disease, or from the removal of tumors and/or hardware. After being processed through RTI's BioCleanse® Tissue Sterilization Process, they are terminally sterilized in their final packaging ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
Aluminum HVL filter kits for traditional HVL measurement on R/F, CT, Dental, and Mammography. 99.5% high pure ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Scatter Probe is our revolutionary solid-state detector for leakage and scatter detection in X-ray environments. Its unique design – two separate detector areas of 10 cm² and 100 cm² – fulfills current regulations and standards for X-ray leakage and scatter measurements (complies with the relevant 21 CFR and IEC 60601 standards). The Scatter Probe connects to our ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI MAS-1 is an invasive probe for the measurement of mA and mAs. Together with Piranha or the Cobia SENSE, direct reading of mA and mAs, as well as waveform, are obtained. The probe connects to the mAs socket in the X-ray generator and to the multimeter. It can be used to measure tube current for both radiographic and fluoroscopic exposures. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The DAP Chamber is the perfect tool for field calibration of orthodontic X-ray equipment. You can measure with just one click – fast, easy, and accurate, ensuring your X-ray quality control process runs safely and ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI T20 Dose Probe is a solid-state detector dedicated to measurements on Rad/Fluoro systems when it is crucial that the detector itself does not have any effect on the system output or disturb the X-ray beam. It was developed for measurements of the patient entrance dose (skin dose) and the maximum dose rate in the radiographic and fluoroscopic field. Despite its small size, the RTI T20 Dose ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
For accurate positioning. For accurate positioning of the RTI Dose Probe– in any position from vertical to upside-down use the Dose Probe Suction Cup Holder! ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
An adjustable stand for easier positioning of the HVL filter for RTI Dose Probe, Piranha, Barracuda MPD, and R100. Filter holder for 33 x 33 or 100 x 100 mm filter size. Please note: HVL Filter Kits are sold separately. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
RTI CTDI Phantom Sets simulates adult and pediatric head and body of patients for QA testing of computed tomography (CT) systems. RTI offers two different CTDI Phantom sets. Choose two (2) or three (3) parts. Both have nested modules to allow adaptation to the size required by the selected user protocol. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The Visi-X is optimized for light field/X-ray field alignment measurements. Simply darken the X-ray room and place your Visi-X under the X-ray tube. Adjust the light field, and make your exposure. The radiation field will immediately be visualized by the glow of the special phosphor compound. It can also be used for checking the centering of the bucky tray. Included: transport case (dimensions: ...
Manufactured by:RTI Surgical based inAlachua, FLORIDA (USA)
RTI's bone-tendon-bone (BTB) grafts are sterilized through the BioCleanse Tissue Sterilization Process without the use of irradiation. These grafts allow for multiple techniques and fixation options in ligament reconstruction ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The RTI Chamber Adapter is an external module for connecting ion chambers to the Piranha, Cobia FLEX, or Cobia SENSE meters. The adapter upports ion chambers with LEMO triaxial connectors (e.g. RTI CT Ion Chamber, DAP chamber, and Magna 1cc mammography ion ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
Focal spot measurements. Use RTI Slit Camera for X-ray focal spot measurements, to assure that the X-ray tube focal spot size is within acceptable limits. The RTI Slit Camera can be rotated 90 degrees in the Slit Camera holder. This simplifies the length and width measurements since the slit only needs to be aligned once. Fulfills the IEC standard 60336. ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
The perfect solution for storing. The Soft-Shell Case is a perfect solution for storing your Cobia or Piranha, a power supply, tablet, and a couple of probes. Dimensions: 32 x 22 x 9 ...
Manufactured by:RTI Group AB based inMölndal, SWEDEN
Microsoft Surface Go 3 10″ Tablet PC display for wireless or USB communication with the Piranha, Mako and Cobia meters. The portable tablet comes with a detachable keyboard, Windows 11 Home, installed Ocean Next™ software, built-in Bluetooth, a charger, and all necessary items to make it a user-friendly & versatile remote display for your RTI ...