Refine by
Locations
- Africa
- Algeria
- Angola
- Benin
- Botswana
- Burkina Faso
- Burundi
- Cameroon
- Cape Verde
- Central African Republic
- Chad
- Comoros
- Congo
- Congo, Democratic Republic Of The
- Djibouti
- Egypt
- Equatorial Guinea
- Eritrea
- Ethiopia
- Gabon
- Gambia
- Ghana
- Guinea
- Guinea-Bissau
- Ivory Coast
- Kenya
- Lesotho
- Liberia
- Libya
- Madagascar
- Malawi
- Mali
- Mauritania
- Mauritius
- Morocco
- Mozambique
- Namibia
- Niger
- Nigeria
- Rwanda
- Senegal
- Seychelles
- Sierra Leone
- Somalia
- South Africa
- St. Helena
- Sudan
- Swaziland
- SãO Tomé & PríNcipe
- Tanzania
- Togo
- Tunisia
- Uganda
- Zaire
- Zambia
- Zimbabwe
Coatings2go Medical Equipment & Supplies In Africa
4 equipment items found
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
Primer 5-017 has found utility on Pebax and Nylon and some other low surface energy substrates/plastics. See our Instructions for Use Primer page for more info. The product is supplied as a kit with Crosslinker A for improved strength and adhesion. ...
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
Crosslinker B Concentrate is the active material in Crosslinker B without the diluent solvent. The diluent is what absorbs the moisture and causes eventual viscosity build on the shelf. B concentrate for the coating batch should be pre- mixed 1/1 with NMP (or acetone/inactive ketone, see Topcoat IFU) before adding to the batch. It is then equivalent to Crosslinker B in the instructions for use. ...
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
REACH and European Med Device Regulation friendly alternative to 8-3C, formulated without ...
Manufactured by:Coatings2Go LLC based inCarlisle, MASSACHUSETTS (USA)
Crosslinker A is used in all the coatings and primers for improved durability and adhesion. While the Crosslinker is quite shelf-stable, it should be flushed after opening with a dry non-reactive gas after opening, such as nitrogen or ...