- Home
- netherlands antilles
- Equipment
Ndi Medical Equipment & Supplies In Netherlands Antilles
16 equipment items found
Manufactured by:NDI Europe GmbH based inRadolfzell, GERMANY
Principle use case of our technology: Today, doctors expect systems that support them and minimize risks to the patient. Previously, a frequent challenge was combining navigation and operation. You can see the principle behind our navigation technologies here with the example of our Aurora® electromagnetic measurement ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Transfer coping is a part of an orthopedic protocol used for an indirect implant body transfer copying. Transfer coping consists of three elements: clamp band, trans- and supra-gingival parts. It is used with a closing screw. Such a construction allows to position the analog in the implant properly, to receive the more accurate dental impression and fix it reliably in the impression ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
It includes one torque wrench and seven wrench - adapters: two short hex wrenches; two middle hex wrenches; two 4-way wheel for transocclusal and laboratory screws; one short hexagon wrench for dental ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Bone cutting burrs are used to make it easier to employ and precisely position the implant drills used at the next stage. Made of surgical stainless steel 1.4197 (X20 CrNiMoS13-1). Tensile strength Rm: 881-900 N/mm². Superior corrosion resistance and wear ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
The kind of stable and long-lasting implants recommended for the installation in different clinical cases. Stable in a bone of any ...
Manufactured by:NDI Europe GmbH based inRadolfzell, GERMANY
Electromagnetics is a key technology used in the exceptional NDI 3D measurement systems Aurora and 3D Guidance. All the Aurora value-creation stages take place at our Radolfzell location. 3D Guidance is developed and produced globally in close cooperation between all our locations. ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Designed for proper formation of the bone socket for the implant. Made of surgical stainless steel 1.4197 (X20 CrNiMoS13-1) that has been specially sharpened. Tensile strength Rm: 881-900 N/mm². Superior corrosion resistance and wear resistance. Depth mark grooves at 8, 10, 11.5, 13, and 15 mm. Additional laser marking inside the ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
The seating instrument is designed for the correct insertion of the implant into the implantation socket. Adapted for torque wrench and contains a lock. Made of surgical stainless steel 1.4197 (X20 CrNiMoS13-1). Improved corrosion resistance and wear ...
Manufactured by:Northern Digital Inc. (NDI) based inWaterloo, ONTARIO (CANADA)
The Polaris Vega XT combines unrivalled measurement accuracy, high-speed tracking, and low latency facilitating easy integration of 3D tracking within surgeon-controlled workflows, autonomous OEM robotic surgery systems, and applications. When used as a component of an OEM robotic-assisted surgical system, the Polaris Vega XT can track the positions of the robot base and end-effector in 3D space ...
Manufactured by:Northern Digital Inc. (NDI) based inWaterloo, ONTARIO (CANADA)
The Polaris Vega ST is a versatile optical tracker that can provide trusted measurements in an array of OEM-supported surgical applications, delivering accurate and reliable 3D tracking data. Tracking is achieved via navigation markers that can be attached to OEM surgical instruments such as probes, shavers, awls, drills, microdebriders, and ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Self-cutting implant with cavity and through holes. Due to the original design, the bone tissue is less injured and lost. Recommended for a bone of poor ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Laboratory implant analogs imitate internal part of intraosseous part of the implant. They are used for modelling the basic prosthesis and for copying the implant. The actual model includes the basis with vertical and horizontal antiretention elements. Fixed on the appropriate parts of the mould then the stucco operation model with analogs is made. The analog prosthesis is more accurate. The ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Implant for carrying out the operation of bone ...
Manufactured by:Northern Digital Inc. (NDI) based inWaterloo, ONTARIO (CANADA)
Our specialized optical tracker, the Polaris Vega VT combines accurate optical measurement and live video streaming; these capabilities can be used for developing augmented reality and machine vision for OEM surgical system workflows. As with all Polaris optical trackers, the Polaris Vega VT can track OEM surgical instruments via navigation markers. The HD video camera provides a live view of the ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Optimum implants are optimate in clinical cases of different level of complicacy. Their manufacturing provides the primary stability due to the decreasing of the bone tissue pressure and high osseointegration. An implant has an absolute purity of the surface and excludes the risk of the microbe ...
Manufactured by:NDI Medical based inBad Emstal, GERMANY
Shortened implants are used with insufficient bone quality and a small height of the alveolar bone. The traditional implant systems use is limited by the low quality of bone, reduction of the height of the alveolar apophysis, anatomy of the maxillary sinus and channel of the lower jaw limit the use of traditional implantation ...