Teledyne CETAC -Model Aridus3 -Desolvating Nebulizer System for ICP-MS
The Teledyne CETAC Aridus3 Desolvating Nebulizer System is a specialized liquid sample introduction accessory for inductively coupled plasma mass spectrometry (ICP‑MS). The Aridus3 can enhance analyte sensitivity up to 10 times or more and can greatly reduce solvent-based interferences such as oxides and hydrides.
Most popular related searches
- Analyte sensitivity enhanced up to 10 times or more, depending on liquid sample uptake rate
- Low-volume sample uptake rates of 50, 100, or 200 microliters/min, preserving valuable sample
- C-Flow PFA nebulizer with integrated autosampler probe for use with Teledyne CETAC ASX-112FR MicroAutosampler
- Heated PFA spray chamber for higher sample transport efficiency
- Both PFA nebulizer and PFA spray chamber are behind a secured door to alleviate electrostatic effects
- Inert fluoropolymer membrane for resistance to acids (including HF) and low oxide and hydride levels
- Built-in mass flow controllers (MFCs) for precise setting of Ar sweep gas and N2 addition gas
- Convenient computer software control of spray chamber temperature, membrane oven temperature and both Ar sweep gas and N2 addition gas allows remote tuning if the Aridus3 is placed in a clean enclosure
- New Flow Saver software application allows the user to turn off Ar and N2 gas flows after completion of an overnight run, saving valuable gases
- New removable membrane heater block for ease of cleaning or replacement
- Nebulizer : C-Flow PFA; 50, 100, or 200 µL/min
- Spray Chamber : PFA with pumped drain
- Temperature : 110°C
- Desolvating Membrane : Fluoropolymer
- Ar Sweep Gas : 0.00 to 12.00 L/min
- N2 Addition Gas : 0.0 to 50.0 mL/min
- Input Pressure
- Ar: 70 to 100 psi (4.8 to 6.9 bar)
- N2: 50 to 100 psi (3.4 to 6.9 bar)
- Temperature : 140°C
- Voltage
- 120 VAC +/- 10%, 50/60 Hz, 6A
- 220 VAC +/- 10%, 50/60 Hz, 3A
- Computer Requirements
- Windows 7 / Windows 10 (32 bit or 64 bit)
- .Net 4.6 (included on CD or Windows 10)
- Minimum 2GB RAM
- One available serial or USB port
- Dimensions (W x H x D) : 33.7 cm x 19.2 cm x 52.0 cm
- Weight : 11.8 kg (26 lbs)
- Optional :
- ASX-112FR MicroAutosampler
- QuickWash3 Rapid Washout Accessory