Abdominal Hernia Equipment & Supplies
26 equipment items found
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
Rigid or soft, flat round meshes (10 cm diameter), indicated in the repair of ventral hernias with the open ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
These meshes are used for the treatment of ventral hernias with both laparoscopic and open surgery. The double-layered structure means that the device is especially indicated for intraperitoneal use. The microporous side in ePTFE, which comes into contact with the intestine, minimises adherence; the macroporous side made of monofilament polypropylene, in contact with the wall, promotes tissue ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
Flat oval meshes are made of non-absorbable, polypropylene monofilament Oval Patch. Rigid, flat oval meshes, indicated for the repair of ventral hernias with the open technique. These meshes can be implanted using Trabucco’s “tension-free, sutureless” ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
Hertra® 9 and Hertra® 9A pre-shaped meshes are used to repair inguinal hernias in open surgery and are knitted with quadriaxial technology, a process created and developed by Herniamesh to make lightweight yet strong prostheses. The Hertra® 9 prosthesis is used to treat the male inguinal hernia. The Hertra® 9A mesh is used to repair female inguinal ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
The lightweight pre-shaped Hertra® 6 and 6A meshes are used to repair inguinal hernias in open surgery. They have high porosity and low weight. The Hertra®6 mesh is indicated for male inguinal hernia repairs. The Hertra®6A mesh is used for repairing female inguinal ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
A partially absorbable prosthesis for treating inguinal hernias. Hybridmesh® is a quadriaxial co-knitted mesh with 25% of non-absorbable polypropylene (PP) monofilament and 75% of absorbable polylactic acid (PLLA) monofilament. The prosthesis weighs 80 g/m². The polylactic acid filaments give the mesh the right level of rigidity for quick and easy positioning. After the polylactic acid ...
Manufactured by:Herniamesh S.r.l. based inChivasso (TO), ITALY
The rigid and semi-rigid pre-shaped Hertra® 1, 2, 2A meshes are used to repair inguinal hernias in open surgery. They are easily and rapidly positioned as a result of their rigidity and shape-memory features. For this reason, Hertra® 1, 2 and 2A meshes can also be inserted without sutures or other fixing methods. They are the original meshes designed for tension-free inguinal repair ...
Manufactured by:Safte S.p.A. based inCollegno, ITALY
Provides additional and correct support to the pouch and helps to keep it away from skin. Helps to prevent stoma hernias when the abdominal muscle are weakened. Minimizes pouch ...
Manufactured by:Cook Biotech Inc. based inWest Lafayette, INDIANA (USA)
The Biodesign Hiatal Hernia Graft is used for implantation to reinforce soft tissue where weakness exists, including repair of hiatal ...
Manufactured by:PAVIS SpA based inBuguggiate, ITALY
This medical device has been projected to contain the abdomen and more specifically the abdominal/umbilical hernia thanks to a specific pad that can be easily positioned where needed. It can be used either before a surgical op. (with pad and after medical advice) or after a surgical op. (in this case without pad). The wide Velcro closure combined with the woven ...
Manufactured by:VUP Medical, a.s. based inBrno, CZECH REPUBLIC
The mesh CHS 100 is made of polyester multifilament. It is intended for the replacement of tissue structures or as a bandage for injured or weakened organs and structures. Polyester mesh for surgical use. CHS 100 is produced in dimensions 120×60 cm, 300×200 cm and is supplied in unit ...
Manufactured by:Integra LifeSciences based inPrinceton, NEW JERSEY (USA)
SurgiMend MP is a 2mm thick acellular collagen matrix featuring a macroporous design that facilitates fluid drainage. SurgiMend MP provides the strength and support for complex hernia repair. Perforations in SurgiMend MP allow for tissue revascularization and integration, and play an important role in hernia ...
Manufactured by:TELA Bio, Inc. based inMalvern, PENNSYLVANIA (USA)
2- or 3-layer device, available in 4 shapes for plastic and reconstuctive ...
Manufactured by:LuxSutures based inWeiswampach, LUXEMBOURG
Indictations Steel sutures are intended for use in closure of sternum, orthopaedics, abdominal wall closure and hernia ...
Manufactured by:TELA Bio, Inc. based inMalvern, PENNSYLVANIA (USA)
4-layer device, not intended for intraperitoneal placement STRENGTH‡: + VISCERA CONTACT§: Not ...
Manufactured by:TELA Bio, Inc. based inMalvern, PENNSYLVANIA (USA)
8-layer device, with 2 "smooth external layers" suitable for intraperitoneal placement, STRENGTH‡: + + +, VISCERA CONTACT§: ...
Manufactured by:TELA Bio, Inc. based inMalvern, PENNSYLVANIA (USA)
6-layer device, with "smooth external layers" suitable for intraperitoneal placement, STRENGTH‡: + +, VISCERA CONTACT§: ...
Manufactured by:Boz Tıbbi Malzeme Sanayi ve Tic. A.Ş based inSihhiye, TURKEY
Monoprolen Mesh® is intended for use only by physicians who are trained in the surgical procedures and techniques required for hernia repairs and the implantation of synthetic ...
Manufactured by:Vital Sutures based inFort Myers, FLORIDA (USA)
BioMesh : surgical mesh constituted by polypropylene monofilaments; sterile synthetic material, strength similar to steel, low density, considerable stability and durability in contact with tissues. BioMesh is a polypropylene mesh designed for permanent implantation in the body during open or laparoscopic procedures, and has the role of stabilize and strengthen defects of soft tissues, and act as ...
Manufactured by:TELA Bio, Inc. based inMalvern, PENNSYLVANIA (USA)
4-layer device, with "smooth side" suitable for laparoscopic and robotic-assisted intraperitoneal placement, STRENGTH‡: +, VISCERA CONTACT§: ...