Anatomical Plating Equipment
-
Manufactured by Fusion Implantsbased in UNITED KINGDOM
The Ramus Anatomical Plate is designed to treat caudal mandibular fractures in domestic shorthair cats. Modelled from analysis of CT scan data and 3D-Printed in Ti6Al4V, the RAP provides increased structural integrity over other fixation techniques.Grade-1 Titanium, the gold standard for orthopaedic implants. ...
-
Manufactured by Hankil Tech Medical Co., Ltd.based in SOUTH KOREA
Optimal Fit. Precontoured Plates. Screw Trajectory. Thin profile towards the joint line. Fully Instrumented ...
-
Manufactured by Hankil Tech Medical Co., Ltd.based in SOUTH KOREA
Fracture Application Part : Femur, Optimal Fit, Screw Trajectory, Fully Instrumented System, Pre-contoured ...
-
Manufactured by AF Medical GmbHbased in GERMANY
Clavicle XLOC anatomically shaped plates provide fixation for lateral clavicle fractures with xloc locking screws to lock the plate and to build a fixed-angle ...
-
Manufactured by Fusion Implantsbased in UNITED KINGDOM
Surface topography measurements were obtained from over 70 of English Springer Spaniels humeri CT scans to create the design of two versions of the Lateral Epicondylar Anatomic Plate (LEAP). We investigated the configuration of fractures, and optimised screw hole position and screw direction to maximise bone holding, and minimise the risk of ...
-
Manufactured by Fusion Implantsbased in UNITED KINGDOM
A detailed development approach similar to LEAP ESS was undertaken to design & develop the LEAP implant for French Bulldogs. In the UK there has been over a 17 fold increase since 2003 in this breed according to the UK kennel club, with this breed also being predisposed to condylar fractures. The LEAP French Bulldog is available in one size and in both left and right options. ...
-
Manufactured by GMREISbased in BRAZIL
Locking anatomical plate / self-compression for fixation of clavicle fractures. Combined holes: fixed angle lock and dynamic compression; Demoted extremity for minimally invasive application; Raw material: Titanium 6Al4V according to ASTM F 136 standard. Compatible with Ø2.7 and 3.5 mm fixed-angle locking and cortical screws ...
-
Manufactured by Novastep Inc.based in USA
The unique screw hole design of the MTP plates keep the overall thickness to less than 1.4mm. The anatomic plates are designed with 0° dorsiflexion, delivering 15° of metatarsophalangeal dorsiflexion while preserving 10° anatomical phalangeal ...
-
Manufactured by Double Medical Technology Inc.based in CHINA
These anatomically contoured plates for a scapula are a good choice for solution for different scapular ...
-
Manufactured by Skeletal Dynamics, LLCbased in USA
Anatomically designed bridge plate which facilitates insertion and improves reduction. 10º of volar apex angulation places the hand in a position of improved ...
-
Manufactured by Flower Orthopedicsbased in USA
This low-profile, anatomically-contoured plate sits just proximal to the watershed line, helping to reduce the possibility of tendon irritation while optimizing buttress and fixation abilities. It is pre-packaged with a guide block for accurate and efficient screw placement and is available in standard and narrow widths. ...
-
Manufactured by Dieter Marquardt Medizintechnik GmbHbased in GERMANY
WINSTA-FiT – anatomical, polyaxial, locking. Universal plating system made of titanium. The WINSTA-FiT plating system by Marquardt Medizintechnik offers anatomically shaped plates that have been specially developed for locking plate fixation of fractures of the distal fibula and tibia. ...
-
Manufactured by Treace Medical Concepts, Inc.based in USA
Instrumented approach to triplanar correction with Lapiplasty® Anatomic Biplanar™ ...
-
Manufactured by Flower Orthopedicsbased in USA
Flower fibula plating options include two straight fibula plate designs and an anatomic distal fibula plate. The low-profile Flower Fibula Plates allow for the use of variable angle locking and compression screws that sit flush within the plate. ...
-
Manufactured by Tyber Medical LLCbased in USA
Tyber Medical’s Interbody line provides radiographic markers for precise placement, anatomical shaped-end plates, PEEK or TyPEEK titanium plasma spray coating options for sterile or non-sterile products and offers multiple footprints to optimize the surgical approach. ...
-
Manufactured by Wright Medical Group N.V.based in USA
Key Benefits: Polished stainless steel. ORTHOLOC™ Polyaxial locking. Anatomically contoured low profile plate design. 90 or 180 degree humeral plating ...
-
Manufactured by The Orthopaedic Implant Company (OIC)based in USA
The Clavicle Locking Plate and Screw Set from OIC raises the bar for high-value implants. Considered the most unique bone in the body, the anatomy of the clavicle presents unique challenges in gaining successful fracture repair. OIC’s anatomic clavicle plates meet the needs of virtually all fracture patterns while giving surgeons the ...
-
Manufactured by AF Medical GmbHbased in GERMANY
The proximal head of the femur XLOC plate is anatomically precontoured and the curved shaft is designed to follow the natural shape of the femur ...
-
Manufactured by aap Implantate AGbased in GERMANY
The LOQTEQ® Elbow System has been designed for the treatment of fractures of the distal Humerus and the proximal Ulna. The sophisiticated anatomical design of the plates may act as a repositioning guide in the reduction of complex fractures and allows surgeons choosing either 90° or 180° double plating techniques at the distal ...
-
based in USA
The specially designed Lateral Neck Plate is anatomically curved and scalloped to fit the midshaft metatarsal and distal metatarsal ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you