Refine by
Arthrodesis Equipment & Supplies
48 equipment items found
Manufactured by:Treace Medical Concepts, Inc. based inPonte Vedra, FLORIDA (USA)
Instrumented approach to triplanar correction with Lapiplasty® Anatomic Biplanar™ ...
Manufactured by:Skeletal Dynamics, LLC based inMiami, FLORIDA (USA)
Low-profile intramedullary construct tailored to the functional needs of the patient. Intramedullary placement minimizes soft tissue ...
Manufactured by:Dieter Marquardt Medizintechnik GmbH based inSpaichingen, GERMANY
PipTree – Arthrodesis of the proximal interphalangeal joint of the small toes. Implant for PIP joint fusion.The PipTree implant is an intramedullary force carrier, which enables a stable osteosynthesis of the toe in a physiological position. This easy-to-insert titanium implant fixes the toe in the desired flexion position. ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The OsteoBridge™ IKA, Intramedullary Knee Arthrodesis, system serves to fuse the knee joint. The use of the implant is also possible to bridge long bone defects and to resect the metaphyseal area of the femur and tibia. OsteoBridge™ IKA (Intramedullary Knee Arthrodesis) knee arthrodesis allows cementless or cemented restoration. ...
Manufactured by:Ilion Medical Inc. based inMineapolis, MINNESOTA (USA)
Ilion’s surgical system features the NADIA NeuroSafe posterior bridging approach which eliminates neurovascular risks commonly associated with Laterally-Based Techniques. Our posterior approach never crosses critical neurovascular ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
J.O.C. system allows to perform a posterior occipito-cervical ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
The PM BUTTERFLY® system is intended to provide osteosynthesis between two or more cervical vertebrae thanks to a plate and cervical ...
by:In2Bones Global based inMemphis, TENNESSEE (USA)
The AlloAid® DIP is a sterile, engineered Allograft. The Allograft is supplied in 2 sizes. The AlloAid® DIP complies with all FDA, AATB and state regulatory requirements for donor screening, recovery and ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
The KM BABY osteosynthesis system is intended to provide fixation between two or more vertebrae. ...
Manufactured by:OPED Medical Inc. based inBraselton, GEORGIA (US) (USA)
Vacuum insert allows for earlier weight-bearing and mobility. Indications: Ankle fractures, Metatarsal Fractures, Calcaneus fractures, Severe sprains, ...
Manufactured by:GraMedica based inMacomb, MICHIGAN (USA)
The osteo-WEDGE® system consists of a six-hole locking plate with or without a center wedge. This system provides a superior treatment option for arthrodesis of the first metatarsocuneiform joint. The dorsomedially placed plate has the optimal length and width to provide maximum stability at the arthrodesis site, resisting biomechanical ...
Manufactured by:Neuro France Implants based inLa Ville aux Clercs, FRANCE
S.E.S EVOLUTION® system is intended for thoraco-lumbo-sacral posterior ...
Manufactured by:BioPro, Inc based inPort Huron, MICHIGAN (USA)
The 4-Leg Clover Staple was specifically designed for addressing a four-corner fusion with a single device. A retrospective case series of 32 patients that underwent a limited intercarpal arthrodesis with the Clover Staple resulted in a 100% union rate and grip strength improvement equal to the contralateral ...
Manufactured by:Biotechni based inLa Ciotat, FRANCE
Posterior lumbar arthrodesis system in titanium. 60° polyaxial and double threaded pedicular scew, with conical core for an optimal primary stability. bendable Ø 6mm top-loading rods locked by set screw. 30-120mm adjustable transverse connectors. ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
The OrthoPediatrics Wrist Fusion System is an extension of the PediFrag system, and is indicated for wrist arthrodesis and fractures of other small bones in children, adolescents, and small stature adults. The system consists of two implant length offerings, to fit patients both with and without a proximal row carpectomy (PRC). Bending templates are included in the set to assist ...
Manufactured by:Citieffe S.r.l. based inBologna, ITALY
Intramedullary nailing system for all lower limb indicated for the treatment of diaphyseal, supra-condylar femoral fractures, diaphyseal tibial fractures, corrective osteotomies, pseudoarthrosis, non-unions and mal-unions and tibiotalocalcaneal arthrodesis. The unique design of Estremo nail allows simplified suprapatellar and parapatellar access as well as antegrade and ...
Manufactured by:3D Medical based inMarolles-en-Brie, FRANCE
Used during horses cervical arthrodesis in cases of fracture, dislocation and vertebral instability or misalignment (cervical stenotic ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The MetaCun™ II and DuoMetaCun™ II plates are osteosynthesis locking plates for dorsal fixation of mid and rearfoot arthrodesis procedures. Merete’s updated system utilizes a novel long-hole compression slot mechanism that compresses the fusion site through the displacement of bone fragments underneath the plate. A DIA 3.0 mm compression screw that glides along ...
Manufactured by:Isto Biologics based inHopkinton, MASSACHUSETTS (USA)
Due to Influx™ Sponge’s shape memory and malleable properties, each graft form has the ability to fill voids and conform to bony defects, making them an ideal choice for fracture sites, arthrodesis, or as a supplement in spinal fusion ...
Manufactured by:Paragon 28, Inc. based inEnglewood, COLORADO (USA)
Paragon 28® designed the JAWS™ Nitinol Staple System for use in an osteotomy, arthrodesis and fragment fixation of bones and joints of the foot including fixation of small bone fragments. The JAWS™ Nitinol Staple System uses superelastic nitinol and a simple insertion method to gain rigid compression across an osteotomy site. ...