Biomedical Research Equipment In USA
-
Manufactured by SiO2 Materials Sciencebased in USA
We provide a common drug contact surface starting at the research and pre-clinical drug development phases, through clinical trials, and on through to commercial ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
SI021 - FEP Membranes, 15 in the ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
SI020 1302 Service Kit (with PP Jackets). These kits are used to service our Strathtox Instrument and our Biomed ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
For use with custom designed respiration chambers. The electrode holder is a black acetal cylinder in which the electrode is located so that its tip projects from the end. The holder is used for the insertion of the electrode into the customers’ own respiration chamber. An acrylic collar containing an “O” ring on its inside surface is also provided. This can be cemented over a ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
This is a Clark-type polarographic electrode, with a 22 micron diameter platinum cathode and silver/silver chloride anode, connected by a buffered potassium chloride electrolyte solution. In the normal configuration the cathode is covered with a relatively low permeability polypropylene membrane, in order for the electrode to be used in unstirred solutions or where minimal stirring is required. ...
-
Manufactured by Strathkelvin Instruments Limitedbased in UNITED KINGDOM
The oxygen content of blood can be measured accurately and quickly by the method of Tucker (1967). A small sample of blood is introduced into the chamber containing a solution of ferricyanide. The resulting release of bound oxygen produces an increase in PO2 which is detected by the oxygen electrode. The oxygen content can be calculated from the PO2 change. The base section of the TC 500 is ...
-
Manufactured by CELLINKbased in USA
The go-to 3D bioprinter for cell biologists, tissue engineers and biomedical researchers. Explore the most user-friendly and flexible bioprinter in the world. BIO X is the first 3D bioprinter in the world with Intelligent Printheads (iPH), ensuring your research is always at the forefront. With an ever-growing list of Intelligent ...
-
Manufactured by Matexcelbased in USA
. Description : This product is labeled by TRITC. Tetramethylrhodamine (TRITC) is a bright orange-fluorescent dye with an excitation maximum at 550 nm and an emission maximum at 574 nm.. Product Overview : Matexcel offers a number of labeled biomolecules for biomedical research use.These bioconjugates have been used widely in in-vitro and in-vivo ...
-
Manufactured by Noxilizer, Incbased in USA
Noxilizer’s NOX FLEX™ Biodecontamination platform decontaminates a wide range of equipment and devices used in bio-pharmaceutical manufacturing, biomedical research and other industrial applications requiring bioburden reduction or sterilization. Product line includes: the NOX FLEX™ for isolators, the NOX FLEX™ ...
-
Manufactured by Altimmune Inc.based in USA
An intranasal vaccine designed to provide rapid, stable protection against anthrax after a single administration. It is being developed with the support of the U.S. Biomedical Advanced Research and Development Authority, (“BARDA”) for post-exposure prophylaxis against anthrax following exposure to aerosolized B. anthracis ...
-
Manufactured by SIGA Technologies, Inc.based in USA
SIGA has developed TPOXX® Injection, an intravenous (IV) formulation of TPOXX® for those patients who are too sick or unable to swallow oral capsules. SIGA completed clinical trials for the IV formulation with funding from the Biomedical Advanced Research and Development Authority (BARDA). In April 2021, SIGA submitted a New ...
-
Manufactured by Bruker Corporationbased in USA
and cellular level research they desire. Thanks to its innovative modular concept, virtually any small animal MR imaging application in life science, biomedical and preclinical research can be conducted. Whatever your application is, the BioSpec series will deliver the optimum solution, will perfectly equipping you for the most demanding tasks ...
-
Manufactured by Oxford Biomedical Research, Inc.based in USA
This polyclonal antibody to human glutathione S-transferase A1-1 is produced in goat and is provided as an ammonium sulfate ...
-
Manufactured by BIOPAC Systems Inc.based in USA
Low Flow Resistance With High Filtration Efficiency. Use this disposable bacteriological filter with integrated mouthpiece to protect subjects and equipment. AFT36 is intended for use with only SS11LB—35 mm outer diameter fits directly on the outside of the SS11LB airflow ...
-
Manufactured by Advanced Photonixbased in USA
Advanced Photonix high-quality LED™s and LED-based illumination systems are perfect for many applications. Output, reliability, and wavelength optimization are core elements of our LED illumination technology. From UV to IR, we have the ability to provide highly-efficient illumination for medical, industrial, defense and other applications. Utilizing our unique systems ...
-
based in USA
All formalin-fixed, paraffin-embedded (FFPE) tissue specimens are collected under IRB approval by certified medical pathologists. Tissues are fixed in 10% Neutral-Buffered Formalin (NBF) within 30 to 60 minutes of surgery ...
-
based in USA
The 1x1-tES is the ultimate research tool for non-invasive electrical stimulation of the brain. The Soterix Medical 1x1 transcranial Electrical Stimulation (1x1-tES) device is the most sophisticated and precise stimulator ever designed for tDCS, tACS, tPCS, and tRNS. The 1x1 tES represents a decade of biomedical and industrial design to ...
-
Manufactured by Inventia Life Science Pty Ltd (ILS)based in AUSTRALIA
We’re not chasing pipe dreams about printed organs. Our core technology in digital bioprinting is built for fast, scalable and reproducible printing of 3D cell constructs that you can ...
-
based in USA
All fresh frozen tissue samples are collected under IRB approval by certified medical ...
-
Manufactured by Cellphire Therapeutics, Inc.based in USA
Thrombosomes are made by pooling platelet units from 10 Group O (Universal) blood donors, removing the plasma and adding a natural sugar, trehalose, to stabilize the cells. Water is then removed through a freeze-drying process resulting in a dry powder. The dry product is heat treated as a final step to reduce the risk of viral transmission and then tested for the presence of bacteria prior to ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you