Show results for
Refine by
Corrective Osteotomy Equipment & Supplies
17 equipment items found
Manufactured by:3D-Side based inMont-Saint-Guibert, BELGIUM
When bones are misaligned, a corrective osteotomy surgery can be required. The high technical requirements (corrections of different angles in different planes), the complex bone geometry, the limited visibility and the restricted workspace can result in a difficult surgery. ...
Manufactured by:Citieffe S.r.l. based inBologna, ITALY
Intramedullary nailing system for all lower limb indicated for the treatment of diaphyseal, supra-condylar femoral fractures, diaphyseal tibial fractures, corrective osteotomies, pseudoarthrosis, non-unions and mal-unions and tibiotalocalcaneal arthrodesis. The unique design of Estremo nail allows simplified suprapatellar and parapatellar access as well as ...
Manufactured by:aap Implantate AG based inBerlin, GERMANY
The correction of axial malalignments in extremities is constantly gaining importance in orthopedic surgery. Particularly in regions close to the knee corrective osteotomies for varus and valgus malalignments (bowleg and knock-knee) change the load on the knee joint and may delay the need for partial or full joint replacement. With the aap ...
Manufactured by:OrthoPediatrics Corp. based inWarsaw, INDIANA (USA)
Pediatric Nailing Platform | FEMUR is designed for use in pediatric and small stature adult patients as indicated to stabilize fractures of the femoral shaft; subtrochanteric fractures; ipsilateral neck/shaft fractures; prophylactic nailing of impending pathologic fractures; nonunions and malunions; fixation of femurs that have been surgically prepared (osteotomies) for ...
Manufactured by:Orthofix Srl based inBussolengo, ITALY
Midshaft deformity of humerus in children or small adults with fixator (31000 series) applied. Caution: radial nerve, open procedure for distal screws. Osteotomy and correction of ...
Manufactured by:Zealmax Innovations Pvt. Ltd. based inAhmedabad, INDIA
These plates are intended for extra-articular, partial-articular, and complete-articular distal radius fractures. These plates are designed for both the left and right ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
Locking plate for Hallux-Valgus interventions through proximal chevron, crescentic and closing or open wedge osteotomies as well as TMT1 and MTP1 fusion procedures. The BLP™ Plate is an anatomically shaped U-oblique locking plate that adapts the proximal curvature of the first metatarsal. The plate is available in four lengths (31, 33, 35 and 37 mm) for left and right feet. The plate ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Kirschner wires and K-wires are used to make bone fragments stationary and stabilized during fracture treatment, elongation of limbs, skeletal fixation, inner ostheosynthesis, osteotomy, arthrodesis, correction of deformities, revision procedures where other methods do not work, as guide elements to reach inner traction of bone fragments, guidance of instruments ...
Manufactured by:Advanced Orthopaedic Solutions based inTorrance, CALIFORNIA (USA)
The AOS Da Vinci Tibial Nail System is intended to provide stabilization of various types of fractures, malunions and non-unions of the tibia. ...
Manufactured by:Good Medica Sp z o.o. based inWroclaw, POLAND
The device has an improved control system supported by a touch screen and a new precise drive system. OrtoFlex L2 is a motorized device designed for continuous passive mobilization of the knee and hip (CPM Continuous Passive Motion), it is a perfect complement to the improvement process under hospital conditions, as well as during independent rehabilitation at ...
Manufactured by:Acumed LLC based inHillsboro, OREGON (USA)
The Acumed Hand Fracture System is designed to surgically treat various metacarpal and phalangeal fractures, fusions, and osteotomies and includes five solutions in one tray. Versatile screws, customizable plates, and dedicated instrumentation offer a comprehensive system to streamline the surgical experience. The system features precontoured standard plates, specialty plates, and Hexalobe ...
Manufactured by:Crossroads Extremity Systems based inMemphis, TENNESSEE (USA)
The MINIBunion is a minimally-invasive implant and procedure that spares the joint capsule and gives patients a walking recovery instead of being in a cast for several weeks. The minimally-invasive Minibunion® procedure allows bunion repair through a tiny 15mm incision on the side of the foot. The incision spares the joint capsule and is basically not visible after it heals. ...
Manufactured by:Biovision GmbH based inIlmenau, GERMANY
BetaBASE is a bioresorbable bone replacement from microporous and macroporous β-tricalcium phosphate. BetaBASE consists of pure-phase β-TCP. Potential risks of infection involved in the use or processing of biological material (HIV, BSE, inter alia) are non-existent with BetaBASE. BetaBASE has an interconnected pore system with micropores and macropores that reproduce the well-known ...
Manufactured by:Biovision GmbH based inIlmenau, GERMANY
BioBASE is a bioresorbable bone replacement from microporous and macroporous α-tricalcium phosphate. Biobase is an inorganic, bioresorbable bone replacement from pure-phase α-tricalcium phosphate. BioBASE is a bone replacement for temporarily filling pathological, traumatic and postoperative bone defects. Biobase has a system of micropores (< 5 μm) and macropores (max. 1 mm) ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 10 mm, Saw width: 3 mm, Saw thickness: 0.35 mm. To be used with: standard ...
Manufactured by:Advanced Orthopaedic Solutions based inTorrance, CALIFORNIA (USA)
The AOS Small Bone External Fixation System is comprised of rods, pin-to-rod clamps, multi-pin clamps, and pins used for the management of bone fractures and reconstructive orthopaedic surgery. The modular design of the AOS Small Bone External Fixation System is intended to be used in the stabilization of open and/or unstable fractures in anatomies such as the hand, wrist, forearm, foot, and ...
Manufactured by:Mectron Medical based inCarasco, ITALY
Operative length: 10 mm, Saw width: 4 mm, Saw thickness: 0.55 mm. To be used with: standard handpiece ...