Show results for
Refine by
Cryogenic Applications Gate Valve Equipment & Supplies
34 equipment items found
Manufactured by:VALCO Group based inRuffec, FRANCE
The range of cryogenic devices offered by VALCO allows fluid regulation in critical ...
Manufactured by:Tianjin Huayang Valve Co., Ltd based inTianjin, CHINA
Chief Features: Full Port. Outside Screw And Yoke(SOSY). Bolt Bonnet. Flexible Wedge. Ful ly Guided. API Standard. Extension Holding Week. Available With Gear Operator. Flange ...
Manufactured by:Gosco Valves based inOakville, ONTARIO (CANADA)
Anyone can do cryogenic applications - we do extreme cryogenic applications: Ultra High Pressures, Unstable Liquids, Bi-Directional Sealing, Vari-V Control. It’s what sets us apart from the competition. ...
Manufactured by:Ladish Valves based inHouston, TEXAS (USA)
Figure Numbers: 8293, 8294, 8295, 8299, 8393, 8394, 8395, 8399, 8693, 8694, 8695, 8699, 8995, 8999, 8595, 8599. Design: API 600, API 603, and ASME B16.34 and MSS-SP134. Size: ½” thru 30”. Pressure Rating: 150 thru 2500. End Connection: Flanged / Threaded / Socket Weld / Buttweld. Materials: 300 Series Stainless / Hastelloys / Monel. Testing: Non Cold Box API 598 / Cold Box ...
Manufactured by:Valves Only based inManhattan, NEW YORK (USA)
Body: ZGOCr18Ni9. Bonnet: OCr18Ni9. Stem: OCr18Ni9. Stuffing: PTFE. Seal ring: PTFE. Nominal Diameter: DN10 to ...
Manufactured by:BMT Co., Ltd. based inYangsan-si, SOUTH KOREA
Design Specification: ASME B16.5, B16.34, API 6D applicable, ...
Manufactured by:ZA.VE.RO. Industrial Valves based inRomagnano Sesia, ITALY
Cryogenic valves are designed to operate at temperature down to -196°C.All metallic parts are manufactured in stainless set, while the soft parts are realized in proper special materials suitable for this so severe application. Normally, the seats are in poliChloro-Tri-Fluoro-Ethylene (PCTFE-Kel-F®) and PTFE lip seals insures the sealing of all dynamic components. Valve ...
Manufactured by:Delta Valves Pvt. Ltd. based inVadodara, INDIA
"DELTA" makes Cryogenic valvesare supplied with a sufficient gas column length. Usually supplied by the user, to eliminate any chance of frosting of the packing are. "DELTA" make cryogenic valves are installed on applications involving the production, transport and storage of liquefied gases such as oxygen, nitrogen, argon, natural gas, chilled brine. ...
Manufactured by:SLB based inSugar Land, TEXAS (USA)
Ratings (ASTM A105): 800 p.s.i. @ 850°F, 1975 p.s.i. @ 100°F. Test pressure (ASTM A105): Hydraulic:(minimum), Body - 3000 p.s.i. Seat - 2175 p.s.i. Air under water: Seat - 85 p.s.i. Standards: Construction: founded on API 602, BS 5352, Socket weld: ASME B16.11, Threaded: ASME B1.20.1, Test: founded on API 598-BS 6755 (Pt.1). Connections (xx): SW: Socket weld, B8: Butt weld 80, TH: ...
Manufactured by:Maverick Valves BV based inTilburg, NETHERLANDS
The cryogenic check valves designed by Maverick are suitable for working temperature of -196 ??By adopting the most advanced design concept, high precision processing control and strict process management, the ultra-low temperature valve has many outstanding advantages, such as reliable sealing, high stability at low temperature and long service life, etc. Products are widely used in liquefied ...
Manufactured by:Severn Utilities Valves based inRugby, UNITED KINGDOM
Severn’s Cryogenic valve range is developed from our years of extensive Control valve knowledge and ...
Distributed by:The Alloy Valve Stockist based inBarcelona, SPAIN
Nickel-copper alloy, extended and non-extended stem petrochemical valves with bolted bonnet, integral seat and renewable PTFE/PCTFE disc, complete with alloy internals. Available with threaded, socket weld, hub and butt weld ends. When used in oxygen service, valves are assembled in clean room conditions and are cleaned, bagged, tagged and pressure tested prior to ...
Manufactured by:Hobbs Valve based inCaerphilly, UNITED KINGDOM
Cryogenic Valves for severe low temperature conditions (as low as -196 °C) of the type often found in LNG & LPG processes, our cryogenic valves offer performance, safety and ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
Stainless steel body and topwork, one way tightening (in flow direction), 'live loaded' gland packing 'cleaned and degreased for oxygen service' ...
Manufactured by:Everest Valve Company based inHouston, TEXAS (USA)
Cryogenic Butterfly Valves are made to our existing, field tested proven design in 304, 316 Stainless or customer specs. We use high strength elongated Stainless shafts with Nitronic bearings and spacers for low temperature isolation. A high finish on the valve seat along with Kel-F laminated disc seal gives bubble tight sealing. Metal to metal seating or Laminated Disc Sealing is available. ...
Manufactured by:Cryofab based inKenilworth, NEW JERSEY (USA)
1" IPS Pipe Size Cryogenic Valve. Manual Operation. Vacuum Jacketed. Y-Pattern Style ...
Manufactured by:Rotarex based inLintgen, LUXEMBOURG
Low pressure cryogenic line valve for high-purity fluids - manual ...
Manufactured by:HEROSE based inBad Oldesloe, GERMANY
The Type 09340 cryogenic shut-off valve is a specialized valve designed for use in low-temperature applications, suitable for air gases, vapors, and cryogenic liquefied gases, including LNG. It features a stainless steel body with a bolted bonnet, ensuring tight sealing in the flow direction. The valve operates at pressures ranging from 5 to 50 bar with leakage rate A according to DIN EN 12266, ...
Manufactured by:Generant Inc. based inButler, NEW JERSEY (USA)
The Generant Series Brass CRV, Cryogenic Relief Valve is a spring reference over pressure protection device. The CRV incorporates Generant’s exclusive “Dirt Guard” feature which increases the valves ability to tolerate particulate contamination. This device is ideally suited for use as a “Blocked Line Safety” in cryogenic systems. The CRV is supplied cleaned and ...
Manufactured by:Stöhr Armaturen GmbH & Co. KG based inKönigsbrunn, GERMANY
Axius 1400: check valve designed for high high pressure use. Compact and space-saving with integrated axial bellow actuator with stainless steel body for gaseous or liquefied media for cryogenic systems. Quick closing and opening valve for any installation position. Hermetical tight internal tube with stainless steel bellows on both sides for long life and high leak-tightness to outside. End ...