Endotracheal Tube Equipment In Europe
-
Manufactured by Bactiguard ABbased in SWEDEN
The BIP ETT is used to secure an open airway during anesthesia or when intubation is necessary as part of standard medical care. It is inserted through the mouth or nose into the trachea and connected to a ...
-
Manufactured by Bactiguard ABbased in SWEDEN
BIP ETT Evac is the only tube on the market that combines the subglottic secretion drainage with the ability of the Bactiguard coating to reduce microbial ...
-
Manufactured by Flexicare (Group) Limitedbased in UNITED KINGDOM
ProVu Video Stylet (VS) overcomes the limitations of existing Video intubation devices, making navigating difficult airways ...
-
Manufactured by ICU Medical, Inc.based in USA
Tracheal tubes with a suction port above the cuff can assist in reducing the rate of ventilator-associated pneumonia. The Portex® Suction Above the Cuff Endotracheal Tube (SACETT®) is part of the Blue Line® range of Endotracheal tubes. It has been specifically designed to reduce VAP. The SACETT® ...
-
Manufactured by Flexicare (Group) Limitedbased in UNITED KINGDOM
To be used with an ET Tube when the patient has ‘Teeth ...
-
Manufactured by HSO - Hospital Supply Organisationbased in AUSTRIA
ETTFIX ONE is a single-piece strap for attaching endotracheal tubes. Its skin-friendly properties make ETTFIX ONE especially useful for skin irritations, burn injuries, and people with beards. Because its Velcro® strip is fixed to the tube, ETTFIX ONE prevents the tube from slipping and minimises the risk of ...
-
Manufactured by Vygon SASbased in FRANCE
New concept of endotracheal tube with capillaries moulded into the tubing wall. When gas is injected through these capillaries, turbulence is created at the distal end of the tube, creating a "virtual valve". Continuous insufflation of 15 liters/min of oxygen into the micro-capillaries generates intra-pulmonary pressure between 8 ...
-
Manufactured by Novo Klinik-Service GmbHbased in GERMANY
15 mm standard connector for endotracheal and tracheostomy tubes with 15 mm standard connector, Moisturizes, filters and warms the breathing air, Integrated safety valve in the lid allows the reduction of pressure peaks in case of urge to cough., Integrated O2 port, Tidal volume (VT) (recommended): 50 – 1000 ml, Resistance 0,3 cmH2O (30 ...
-
Manufactured by Ambu A/Sbased in DENMARK
Ambu AuraStraight provides users with an even greater choice and an alternative to the already popular AuraOnce curved laryngeal mask for use both in anaesthesia and emergency medicine. Ambu AuraStraight comes in a full range of 8 sizes from neonate to large ...
-
Manufactured by The Surgical Company B.V.based in NETHERLANDS
The Broncoflex was designed to address the current needs and challenges facing hospitals associated with the use of flexible bronchoscopes. Bronchoscopes are now essential pieces of equipment, used by different medical specialists for a broad variety of clinical ...
-
Manufactured by Lifecast Body Simulation Ltdbased in UNITED KINGDOM
Harley2 has been created from a collaboration between the team at Lifecast Body Simulation Ltd and the Royal Brompton Hospital in London. Harley has been specifically designed to facilitate high fidelity simulation of emergency resternotomy for cardiac deterioration/arrest following cardiac surgery. Emergency resternotomy is an integral and time-critical part of resuscitation following cardiac ...
-
Manufactured by Carl Reiner GmbHbased in AUSTRIA
TwinStream Multi Mode Respirator for tubeless jet laryngoscopy, jet bronchoscopy, jet tracheoscopy and all types of jet ventilation in the fields of surgery and intensive medicine. TwinStream is the first microprocessor-driven Superimposed High-frequency Jet ventilation apparatus and sets an entirely new standard in the jet ventilation ...
-
Manufactured by GINEVRI srlbased in ITALY
The Baby Start is a manual resuscitator, light and compact, suitable for delivery rooms, postpartum, in special units for neonatal care and in ...
-
Manufactured by Biçakcilarbased in TURKEY
We are proud to introduce our new "Suction Catheters With Protective Sleeve”, designed to prevent aerosol spread of microorganisms into the nearby environment, and reducing risk of disease spread among our precious frontline healthcare professionals, doctors and nurses, engaged in a relentless war against COVID-19. Suction catheters with protective sleeve have proven to be more effective ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you