Femoral Proximal Equipment & Supplies
17 equipment items found
Manufactured by:Permedica S.p.A. based inMerate (LC), ITALY
The femoral proximal neck anatomy presents a particular trabecular structure that implicates precise distribution of weight bearing stresses. The JUST prosthesis fits perfectly into the trabecular bone system. Following Wolff’s law, it ricreates a physological bone remodelling, utilizing the same trabecular system for osseointegration. ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
For optimal results the surgery should be planned in advance using the appropriate templates. The templates are enlarged by a factor of 110%. The implant size should be choosen using good quality AP and ML X-rays with adequate contrast. Each X-ray should be large enough to apply the whole ...
Manufactured by:Permedica S.p.A. based inMerate (LC), ITALY
The PROMISE S stem is characterized by an anatomical shape and reduced dimensions thus allowing a minimally invasive approach, preservation of the femoral neck and minimal bone sacrifice in the metaphyseal region. Anatomical curvature Bone sparing Physiological load support. Product range: 7 sizes anatomic press-fit and ...
Manufactured by:Pega Medical Inc. based inLaval, QUEBEC (CANADA)
The LolliPOP (Locking Pediatric Osteotomy Plate) system is an innovative modular blade-plate system for stable fixation of pediatric proximal femoral osteotomies and ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
For optimal results the surgery should be planned in advance using the appropriate templates. The templates are enlarged by a factor of 110%. The implant size should be choosen using good quality AP and ML radiographs with adequate contrast. Radiographs should include a full A/P (anterior/posterior) view of the pelvis, including the proximal one-half of both femurs and a lateral view of the ...
Manufactured by:Microport Orthopedics Inc. based inArlington, TENNESSEE (USA)
The Conserve® Plus total resurfacing hip system has been designed to be a conservative prosthetic solution for hip ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
vThe USTAR II System is designed for extensive reconstruction of the hip and knee joint. Components have been designed based on 20 years experience with the previous USTAR system. The modularity of the USTAR II System is designed to allow flexibility to address a variety of difficult surgical ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
For Advanced planning and enhanced outcomes Medical Models are a valuable aid to be used as a reference in the operating ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
The ELEOS proximal tibia component is designed with a reduced profile, making for easier wound closure. Additionally, the ELEOS proximal tibia design incorporates the same, simple hinge mechanism as the revision hinge and distal femur, including a one-piece hinge with preassembled poly for both bearing and ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
The ELEOSTM revision hinge prosthesis offers a 5° valgus angle to assist in the restoration of patello-femoral kinematics. This coupled with a deepened patellar groove, promotes the reduction of patellar subluxation and normal loading patterns. The integrity and longevity of the ELEOS hinge construct is maximized with internal/external rotation stops which are set for +/- 15° of tibial ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
The ELEOS proximal femoral system consists of a femoral component, optional midsection, and stem. The femoral component is compatible with various femoral heads and bipolar options. ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The AJS® hip stem system features a complete range of cementless and cemented implants for primary arthroplasty. Because they are shaped to very closely fit the proximal endosteal femoral geometry of European patients, the AJS® stem gives outstanding primary stability via an immediate tight fit. The lateral shoulder of the prosthesis fills the medullary ...
Manufactured by:Onkos Surgical based inParsippany, NEW JERSEY (USA)
The ELEOS total femoral system incorporates special male-male midsections designed to allow for anatomic femoral neck anteversion. The ELEOS total femoral system incorporates the identical distal femoral prosthesis, offering a 5° valgus angle to assist in the restoration of patello-femoral kinematics. This coupled with a deepened patellar groove, promotes the reduction of patellar subluxation ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The fully porous, distal fixation philosophy of the Arcos One-piece Femoral Revision System offers three cylindrical, forged titanium stem options with a unique size range to address a wide range of femora, including patients of small ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. During this procedure, the femoral head is typically resected and the proximal femoral canal is broached and/or milled to accept the femoral component with attached prosthetic ...
Manufactured by:MedSpark, LLC based inSan Luis Obispo, CALIFORNIA (USA)
Such joint replacement orthopedic surgery is generally conducted to relieve arthritis pain or fix severe physical joint damage such as a hip fracture. During this procedure, the femoral head is typically resected and the proximal femoral canal is broached and/or milled to accept the femoral component with attached prosthetic ...
Manufactured by:Veryan Medical Ltd. based inHorsham, UNITED KINGDOM
The Challenge: Peripheral Arterial Disease. People are living longer and with an increase in the incidence of obesity, diabetes and other contributing factors, claudication may cause substantial tissue changes and, in some scenarios, can lead to amputation and even death. The peripheral stent market is forecast to grow to $2 billion by 2024 driven by technological advances, an ageing population ...