Show results for
Refine by
Fixation Implant Equipment & Supplies
27 equipment items found
by:Aurora Spine, Inc. based inToronto, ONTARIO (CANADA)
The ZIP 51™ is Aurora Spine's minimally invasive interlaminar fixation implant for spinal fusion and was developed as an alternative to pedicle screw fixation. The ZIP 51 implant is designed for stabilization and load sharing during T1 - S1 thoracolumbar fusion procedures, specifically for the treatment of degenerative disc ...
by:Aurora Spine, Inc. based inToronto, ONTARIO (CANADA)
The ZIP LP™ is Aurora Spine's slimmest minimally invasive interlaminar fixation implant for spinal fusion and was developed as an alternative to pedicle screw fixation. The ZIP LP implant is designed for stabilization and load sharing during T1-S1 thoracolumbar fusion procedures, specifically for the treatment of ...
by:Aurora Spine, Inc. based inToronto, ONTARIO (CANADA)
The ZIP ULTRA® is Aurora Spine's minimally invasive interlaminar fixation implant for spinal fusion and was developed as an alternative to pedicle screw fixation. The ZIP ULTRA implant is designed for stabilization and load sharing in T1-S1 thoracolumbar fusion procedures, specifically for the treatment of ...
Manufactured by:Matrix Surgical USA based inNewnan, GEORGIA (US) (USA)
The Extended Orbital Rim Implant can be used to augment the inferior and lateral orbital rim in trauma or for congenital cases. The implant allows for screw fixation for initial ...
Manufactured by:Arthrex, Inc. based inNaples, FLORIDA (USA)
The BioComposite SwiveLock® implant kits were developed for reconstruction of the MPFL in cases of acute patellar dislocation or chronic patellofemoral instability. Providing surgeons and operative staff with a complete, convenient solution for MPFL reconstruction procedures, the kits include either a 6 mm × 23 mm BioComposite FastThread™ interference screw or an ...
Manufactured by:Anika Therapeutics, Inc. based inBedford, MASSACHUSETTS (USA)
Anika’s ToeMate® System is a strong, easy to install intramedullary bone screw implant with proven taper lock fixation intended for the correction of a hammertoe deformity. The implant components are completely embedded in the phalangeal bone, preventing implant exposure and complications associated with post-op pin ...
Manufactured by:United Orthopedic Corporation (UOC) USA Inc. based inIrvine, CALIFORNIA (USA)
The UDM (United Dual Mobility) acetabular system is designed to help prevent dislocation by providing increased jump distance and range of motion. The UDM acetabular system consists of a Cobalt Chrome (CoCr) acetabular cup and a mobile polyethylene liner that rotates within the cup and captures the femoral head. The inner surface of the cup is polished to allow optimal articulation between the ...
Manufactured by:The Orthopaedic Implant Company (OIC) based inReno, NEVADA (USA)
External fixators are one of the most expensive devices in orthopaedics today. It’s a problem that we’ve addressed with the first high-value External Fixation System. We tasked ourselves with raising the bar (and pin) for value in external fixation and the result is a simple and intuitive system offering all the options required by today’s top ...
Manufactured by:Green Apple Healthcare Pvt. Ltd. based inPune, INDIA
PEEK Prevail is a stand-alone cervical interbody implant with internal screw fixation indicated for patients with single-level cervical disc disease. ...
Manufactured by:Tecres S.p.A. based inSommacampagna (VR), ITALY
Its low viscosity makes it suitable for syringe application. Available in the 50g pack. Cemex® is the bone cement designed by Tecres for joint implants fixation. Right from the start, the company focused on research and development of acrylic resins, creating a unique and revolutionary product in 1986. Since then, the outstanding features of Cemex® have ...
Manufactured by:Tecres S.p.A. based inSommacampagna (VR), ITALY
Its medium viscosity makes it suitable for both syringe and manual applications (waiting time is a few minutes longer in manual applications). Available in the 40g pack. Cemex® is the bone cement designed by Tecres for joint implants fixation. Right from the start, the company focused on research and development of acrylic resins, creating a unique and ...
Manufactured by:Zimmer Biomet CMF and Thoracic based inJacksonville, NEW JERSEY (USA)
Conforms more closely to the contours of the sternum than other less flexible wires. Meets the ASTM F138 & 5832-1 standards for implant grade surgical fixation sternotomy suture ...
Manufactured by:Anatomics Pty Ltd. based inMelbourne, AUSTRALIA
Patient specific titanium spine cages and plates can be fabricated individually from CT data to allow surgeons to restore the natural alignment of the spine and assist fusion in cases where a standard off-the-shelf implant is not suitable. These implants can be designed for either anterior or posterior fusion or vertebral corpectomy. The implants ...
Manufactured by:Ossea Medical Technology based inCampinas, BRAZIL
It is intended for corpectomy, discectomy or mono- or multi-segmental fixation of the thoracic and lumbar spine in cases of: Degenerative instabilities. Spinal cord syndromes. Spondylolistheses. Deformities. Canal stenosis. Supplementary internal fixation of fractures treated by an intercorporal fusion or external ...
Manufactured by:LVD Biotech based inSant Vicenç dels Horts, SPAIN
LVD BIOTECH Anti-microbial coating is designed to attract and kill bacteria upon contact. It is developed using our proprietary polymer technology and provides a durable surface to many substrates including medical-grade PDMS (silicones) and Metals. The coating is bonded to the surface generating electrostatic forces capable of attracting bacteria and killing on surface contact. ...
Manufactured by:Centinel Spine based inWest Chester, PENNSYLVANIA (USA)
Developed with prominent spine surgeons to address an unmet need, STALIF L meets the demands and complexity of minimally invasive lumbar lateral interbody fusion procedures. Surgical Ease: Integrated self-tapping, self-drilling screws simplify implant immobilization with optimized screw angulation to provide strength and stability without interfering with posterior hardware. ...
Manufactured by:Precision Spine, Inc. based inParsippany, NEW JERSEY (USA)
The AccuFit® Lateral Plate System is indicated for use via a lateral or anterolateral surgical approach above the bifurcation of the great vessels in the treatment of thoracic and thoracolumbar (T1-L 5) spine instability. The AccuFit® Lateral Plate System consists of non-sterile, single use, titanium alloy (Ti-6AI-4V ELI per ASTM F136) rigid plates and bone screws of varying sizes and ...
Manufactured by:Shoulder Innovations based inGrand Rapids, MICHIGAN (USA)
The InSet Glenoid Implant was designed to address the number one issue in Total Shoulder Arthroplasty, Glenoid ...
Manufactured by:Shoulder Innovations based inGrand Rapids, MICHIGAN (USA)
The InSet™ Glenoid Implant was designed to address the number one issue in Total Shoulder Arthroplasty, Glenoid ...
Manufactured by:MicroVal based inSaint-Just-Malmont, FRANCE
The SPIRE’IT applicator is a ready-to-use mechanical suture used in implant fixation. The Spire is used in many surgical procedures such as hernia repairs. Made from a shape memory alloy thread, NITINOL, it has, at rest, in the form of double 4mm in diameter coils. 10 sutures are placed elongated in a barrel and return to their initial shape when ...