Hip Replacement Equipment & Supplies
43 equipment items found
Manufactured by:Medacta International based inCastel San Pietro, SWITZERLAND
Quadra System is a straight stem complete system for use in primary and revision ...
Manufactured by:Medacta International based inCastel San Pietro, SWITZERLAND
The Quadra-P System offers a complete set of stems developed preserving the characteristics important to the clinical success of Quadra-H while incorporating proven innovative key features to address the modern challenges in ...
Manufactured by:Conformis based inBillerica, MASSACHUSETTS (USA)
Cordera Match Hip System combines the proven Cordera hip stem with Conformis’ state-of-the-art, personalized pre-operative plans and patient-specific ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The ANTHOLOGY system is a hip stem (femoral implant with a neck and ball) used for primary hip replacement surgery. The hip joint is a ball and socket joint, connecting the femur with the pelvis. The head of the femur, shaped like a ball, fits tightly into the acetabulum, forming the ball and socket joint of the ...
Manufactured by:Medacta International based inCastel San Pietro, SWITZERLAND
AMIS (Anterior Minimally Invasive Surgery) is the only hip replacement technique that follows both an inter muscular and inter nervous path to greatly decrease damage to periarticular structures while preserving tissue. AMIS is a true muscle-sparing procedure supported by the industry’s most detailed surgeon training protocol. ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
The EasyHip Bipolar Head consists of an UHMWPE component encased in an ultra-smooth polished CoCrMo outer metal casing, for articulation in the bony acetabulum. It is to be used in conjunction with femoral components from the GO Implants Total Hip ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
For optimal results the surgery should be planned in advance using the appropriate templates. The templates are enlarged by a factor of 110%. The implant size should be choosen using good quality AP and ML radiographs with adequate contrast. Radiographs should include a full A/P (anterior/posterior) view of the pelvis, including the proximal one-half of both femurs and a lateral view of the ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. Detailed correlation can be seen in table ...
by:INNOPROOF GmbH based inRostock, GERMANY
In the static burst test, the strength of the ball head is determined in connection with the stem trunnion. After the head has been attached to the stem trunnion with a defined force, a static axially acting load is applied to the head at a fixed rate. A termination criterion is, among others, a breakage of the head. For a successful test, five samples must be tested without failure to a defined ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The Cementless Modular Straight Stem is designed to be used for primary hip osteoarthritis, rheumatic coxitis, avascular necroses and broken femoral neck. This prosthesis is also available with hydroxapatite (H.A) coating. Its HA coating uses the osteoinductive qualities of this efficient biomaterial, which reproduce the mineral fraction of nature bone. It ensures secondary biological active ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
TCK-10 Hip Prosthesis is intended for uncemented use in the primary application as treatment of the followings; patient conditions of noninflamatory degenerative joint disease, avascular necrosis, osteoarthritis and inflammatorily joint disease, rheumatoid arthritis. TCK-10 Hip Prosthesis is designed to be durable for revision hip arthroplasty when there is an intact metaphyseal-diaphyseal ...
by:INNOPROOF GmbH based inRostock, GERMANY
The tests according to ISO 7206-4 and -6 refer to the shaft or neck area of the femoral component of hip endoprostheses. The fatigue strength of the hip stem is determined under a given sinusoidal load and over a defined number of cycles. The clamping as well as the applied loads differ according to the design of the hip stem, classified as a short, standard or revision stem. Moreover, special ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The S2 Modular Hip Prosthesis System is intended to be used as the proximal part of a hip stem arthoplasty. The system is designed to be used for femur fractures of primary hip operated patients. It is totally designed for uncemented ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The S2 Anatomical Modular Hip Prosthesis System is intended to be used as the proximal part of a hip stem arthoplasty. The system is designed to be used for femur fractures of primary hip operated patients. It is totally designed for uncemented application. While neck length increases in the line with the prosthesis ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The S2 Primary Modular Hip Prosthesis System is intended to be used as the proximal part of a hip stem arthoplasty. The system is designed to be used for femur fractures of primary hip operated patients. It is totally designed for uncemented application. While neck length increases in the line with the prosthesis diameter. Optional Ti. plasma spray (PL), HA or Porous coated stems use the ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
Zimmer Biomet's E1 Antioxidant Infused Technology is the only bearing option that utilizes a proprietary diffusion process to maxamize strength, wear resistance and prevent oxidative degradation of the ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The Echo Femoral Hip System offers a modern metaphyseal loading fit and fill design to address increasing hospital demands for both primary and fracture applications. Four stem options with various fixation modes address the distinct needs of each patient, while the customizable instrumentation platform provides enhanced surgical workflow. Zimmer Biomet addresses the unpredictability of fracture ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
Zimmer Biomet’s Arcos Modular Femoral Revision System meets the demands of complex hip revision surgery by offering surgeons and OR staff the ability to customize both the hip implant and its corresponding instruments. Three proximal and five distal geometry options provide surgeons 117 proximal/distal combinations and multiple auxiliary fixation options for various femoral defects. This ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The fully porous, distal fixation philosophy of the Arcos One-piece Femoral Revision System offers three cylindrical, forged titanium stem options with a unique size range to address a wide range of femora, including patients of small ...
Manufactured by:Zimmer Biomet based inWarsaw, INDIANA (USA)
The collarless, polished, double-taper design concept used in the CPT Hip System has proven itself clinically in more than 25 years of use.¹ This distinctive design philosophy is based on the use of natural compressive forces to help ensure that the implant is firmly seated and wedged within the cement mantle. The CPT System, in cobalt-chromium² and stainless steel,3,4 has achieved ...