Hip Stem Equipment & Supplies
34 equipment items found
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
The Entrada Hip Stem integrates a wealth of clinical history—hydroxyapatite coating, compaction broaching, taper wedge geometry—and provides critical refinements—progressive neck lengths, consistent proximal body growth, shorter distal stem lengths—creating a dynamic combination of features that benefit patient and ...
Manufactured by:Enovis based inLewisville, TEXAS (USA)
Superior Loading: A shortened hip stem must derive stable loading from it superior regions or risk failure. The Revelation microMAX stem features proximal geometry that maximizes stability and provides physiologic load transfer that no other short stem can ...
Manufactured by:Microport Orthopedics Inc. based inArlington, TENNESSEE (USA)
The Profemur® line of primary hip stems has an established clinical history. Each Profemur® hip stem offers its own philosophy to provide fixation and replace bone anatomy. Triple taper stem philosophy" Designed for primary hip replacement surgery, the Profemur® Gladiator® ...
Manufactured by:implantcast GmbH based inBuxtehude, GERMANY
The BethaLoc® hip stem is made of implatan® titanium alloy (TiAl6V4) and is available in a standard and lateralised offset version, each with a CCD angle of 130°. Rotational stability and osseointegration are improved by the longitudinal grooves on the entire stem. The proximal two-thirds of the stem are coated with ...
Manufactured by:B. Braun Melsungen AG based inMelsungen, GERMANY
The Metha Short Hip Stem prosthesis represents a new generation of implants for hip endoprosthesis. It combines two advantages: minimal stem size and a circumferential coating. The implant design enables minimally invasive procedures. The design continues on the positive experience with non-cemented stems fixated ...
Manufactured by:endocon GmbH based inWiesenbach, GERMANY
The EndoDriver is a proven surgical instrument for total hip replacement femoral components that should be available in every revision surgery. Revision operations are safer and better when scheduled with this instrument. Only a few steps necessary for safe fixation of the instrument to the neck of the prosthesis, Axial force transfer and stable clamping force by patented system, Transfer of ...
Manufactured by:Aristotech Industries GmbH based inLuckenwalde, GERMANY
Cemented Straight Hip Stem based on the principles of the original Müller Prothesis developed by Professor Maurice Müller in ...
Manufactured by:Ortho Development Corporation based inDraper, UTAH (USA)
The Ovation Hip System is designed with optimal refinements to the best clinically proven M/L taper stems, providing 3-points of fixation and excellent rotational stability. Ovation and Ovation Tribute have simple, intuitive instrumentation to provide intraoperative ...
Manufactured by:Shukla Medical based inSt. Petersburg, FLORIDA (USA)
The Xtract-All Hip Universal Hip Stem Extraction System is designed for the removal of well-fixed hip stems during revision surgeries. The system consists of a variety of instrumentation geared towards removal of varying designs of hip ...
Manufactured by:Aristotech Industries GmbH based inLuckenwalde, GERMANY
Based on the design of the well-known and clinically proven femoral stem Implanted first in 1986 in France. supplied in 11 sizes. Standard & Lateral. As Titanium Forgings or As Finished Femoral Stems; Hydroxyapatite (HA) coated. ...
Manufactured by:Aristotech Industries GmbH based inLuckenwalde, GERMANY
Based on the design principles of the well-known and clinically proven press-fit femoral stem, concepted by Professor Karl Zweymüller in Austria in 1979. Zweymüller, K. (1986). A cemented titanium hip endoprosthesis system, based on press-fit fixation: Basic research and clinical results (Inst. Course lect., ...
Manufactured by:Aristotech Industries GmbH based inLuckenwalde, GERMANY
Femoral Stem Forgings based on the design concepts of clinically proven uncemented stems, developed in the ...
Manufactured by:Groupe Lepine based inGENAY, FRANCE
The titanium alloy TARGOS™ Mini self-locking femoral stem with collar is intended for cementless implants. It controls the sinking and preserves the spongy hip bone structure. This shortened stem provides a solution adapted to the indications of total hip arthroplasty in young active patients and is perfectly suited for a ...
by:INNOPROOF GmbH based inRostock, GERMANY
The tests according to ISO 7206-4 and -6 refer to the shaft or neck area of the femoral component of hip endoprostheses. The fatigue strength of the hip stem is determined under a given sinusoidal load and over a defined number of cycles. The clamping as well as the applied loads differ according to the design of the hip ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The S2 Modular Hip Prosthesis System is intended to be used as the proximal part of a hip stem arthoplasty. The system is designed to be used for femur fractures of primary hip operated patients. It is totally designed for uncemented ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The S2 Anatomical Modular Hip Prosthesis System is intended to be used as the proximal part of a hip stem arthoplasty. The system is designed to be used for femur fractures of primary hip operated patients. It is totally designed for uncemented application. While neck length increases in the line with the prosthesis ...
Manufactured by:GO German Orthopedic Implants GmbH based inHamburg, GERMANY
for total hip arthroplasty are small ceramic balls that are placed onto the hip stem. Due to the conical design of the 12/14 taper, the heads sit firmly on the stem and require no additional fixation. EasyHip Ceramic Heads come in three diameters (28 mm, 32 mm and 36 mm) and four head neck lengths, ranging from -4 mm to +8 mm. ...
Manufactured by:TIPMED Medical Device Manufacturing Ltd. Co. based inIzmir, TURKEY
The S2 Primary Modular Hip Prosthesis System is intended to be used as the proximal part of a hip stem arthoplasty. The system is designed to be used for femur fractures of primary hip operated patients. It is totally designed for uncemented application. While neck length increases in the line with the prosthesis diameter. ...
Manufactured by:Conformis based inBillerica, MASSACHUSETTS (USA)
Cordera Match Hip System combines the proven Cordera hip stem with Conformis’ state-of-the-art, personalized pre-operative plans and patient-specific ...
Manufactured by:Smith & Nephew plc based in, UNITED KINGDOM
The ANTHOLOGY system is a hip stem (femoral implant with a neck and ball) used for primary hip replacement surgery. The hip joint is a ball and socket joint, connecting the femur with the pelvis. The head of the femur, shaped like a ball, fits tightly into the acetabulum, forming the ball and socket joint of the ...