Implant Used Equipment
-
Manufactured by Sonavex, Inc.based in USA
EchoMark is a highly echogenic, bioresorbable polymeric implant used for marking soft tissue sites in surgical patients ...
-
by DOT GmbHbased in GERMANY
A porous TPS coating is applied on the implants using a vacuum plasma spray process to modify the surface of ceramic implants and thus to make the surface attractive for improved osseointegration. ...
-
Manufactured by Medical Device and Implants (MDI)based in USA
Titanium or cobalt chrome implants used in spinal fusion surgery (or scoliosis surgery), they run parallel to the spine on both sides held in place by pedicle screws with a locking cap or ...
-
Manufactured by HumanOptics AGbased in GERMANY
The innovative XL optic of the ASPIRA-aXA combines the advantages of a 7.0 mm optic with the stability of the new cut-out haptic design. This posterior-chamber IOL an be conveniently implanted using small-incision technology while adhering to surgical ...
-
Manufactured by Medical Device and Implants (MDI)based in USA
Pedicle screws are orthopedic implants used occasionally in a spinal fusion to add extra support and strength to the fusion while it heals. Pedicle screws are placed above and below the vertebrae that were fused. A rod is used to connect the screws which prevents movement and allows the bone graft to heal. ...
-
Manufactured by Merete Technologies, Inc. (MTI)based in USA
OsteoBridge™ IDSF is a modular diaphyseal implant used for long term stabilization of segmental bone defects in humerus, femur and tibia of oncology patients. The modular endoprosthesis spacer consists of a spacer(s), that fixates two intramedullary nails and bridges the defect after ...
-
Manufactured by NDI Medicalbased in GERMANY
Shortened implants are used with insufficient bone quality and a small height of the alveolar bone. The traditional implant systems use is limited by the low quality of bone, reduction of the height of the alveolar apophysis, anatomy of the maxillary sinus and channel of the lower jaw limit the use of traditional ...
-
Manufactured by Herniamesh S.r.l.based in ITALY
Flat oval meshes are made of non-absorbable, polypropylene monofilament Oval Patch. Rigid, flat oval meshes, indicated for the repair of ventral hernias with the open technique. These meshes can be implanted using Trabucco’s “tension-free, sutureless” ...
-
Manufactured by Zealmax Innovations Pvt. Ltd.based in INDIA
Pedicle screw implants use a rod screw construct that can be made with monoaxial screws with an immobile pedicle screw head. Monoaxial Pedicle Screw has an additional degree of freedom, allowing for better screw positioning within the pedicle. This makes it easier to insert the rod into the desired position and reduces unwanted ...
-
Manufactured by Aran Biomedical Teorantabased in IRELAND
Polyethylene terephthalate (PET) is the most common resin of the Polyester family, and the fibre is often referred to as Dacron or Terylene in the medical device industry. All our PET is implantable grade, and we work with monofilament and multifilament input yarns to develop low-profile braided constructs for implantable use. The braids ...
-
Manufactured by Medical Device and Implants (MDI)based in USA
Internal fixation allows shorter hospital stays, enables patients to return to function earlier, and reduces the incidence of nonunion (improper healing) and malunion (healing in improper position) of broken bones. The implants used for internal fixation are made from stainless steel and titanium, which are durable and strong. If a ...
-
Manufactured by GEUDER AGbased in GERMANY
Retinal implants are used in surgical treatment of retinal detachments. The implant creates an indentation in the sclera and choroid approximating the retina to the pigment epithelium. This procedure is accomplished by local indentation or through the use of an implant that encircles the ...
-
by ni2o, Inc.based in USA
and be continually improved by machine learning. It is implanted using an internally-developed, minimally-invasive surgical procedure. A cloud-based software platform will then securely collect and interpret information in ...
-
Manufactured by Axogen (AXGN)based in USA
Axoguard Nerve Protector is the only porcine submucosa extracellular (ECM) matrix surgical implant used to protect injured nerves and to reinforce nerve reconstruction while preventing soft tissue attachments. Designed to protect and isolate, the Axoguard multi-laminar ECM separates and protects the nerve from the surrounding tissues ...
-
Manufactured by Pakumed Medical Products Gmbhbased in GERMANY
TITAN-PORTS are totally implantable port catheter systems for venous implantation. They consist out of a titan chamber (port), a screw closure mechanism, a self-sealing silicone membrane and a catheter. Each system includes a 20 G access needle, a rinsing needle, a vein lifter, the instruction for use and an implant card. If the ...
-
Manufactured by Merete Technologies, Inc. (MTI)based in USA
; FlexTack™ staple is closely aligned to the anatomy of the femur and tibia. Cannulated staple legs allow precise placement using K-wires. This technological improvement on conventional implants for correcting varus/valgus misalignments reduces intraoperative fluoroscopy times and can be implanted using minimally invasive ...
-
Manufactured by Pulmonx Corporationbased in USA
The Zephyr Endobronchial Valve is an implantable device used to occlude all airways feeding the hyperinflated lobe of a lung that is most diseased with ...
-
Manufactured by Pakumed Medical Products Gmbhbased in GERMANY
TITAN-PORT V are totally implantable port catheter systems for venous implantation. They consist out of a titan chamber (port), a screw closure mechanism, a self-sealing silicone membrane and a catheter. Each system includes a 20 G access needle, a rinsing needle, a vein lifter, the instruction for use, a patient care guide and an ...
-
Manufactured by Bioventus Inc.based in USA
Agili-C is a cell-free, off-the-shelf implant for use in cartilage and osteochondral defects in traumatic and osteoarthritic joints. The implant is a porous, biocompatible, and resorbable bi-phasic scaffold, consisting of interconnected natural inorganic calcium carbonate ...
-
Manufactured by Novastep Inc.based in USA
The Pecaplasty System delivers reproducible outcomes in percutaneous bunion correction. The instrument helps navigate the challenges of the procedure by controlling translation and providing accurate placement of the guide wires. Peca Implants are used to fasten and stabilize the correction during the healing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you