Refine by
Joint Reconstruction Equipment & Supplies
21 equipment items found
Manufactured by:Mega Biopharma based inCrosne, FRANCE
Product / use: biological cements, watertight cements, for fixing the implant in place in the bone. Key properties: osteogenic, homeostatic, biocompatible, bioabsorbable, radiopaque, no volume reduction, no exothermic reaction. ...
Manufactured by:boneArtis AG based inMunich, GERMANY
The Twin Concept of SDI® for joint reconstruction: The thin-walled “T” instruments are considered for transplantation. ...
Manufactured by:Surgical Solutions based inSan Juan, PUERTO RICO
Orthopedic implants & reconstruction systems for fracture management, joint reconstruction/ preservation,? sports medicine,?and ...
Manufactured by:Surgical Solutions based inSan Juan, PUERTO RICO
INFIX:EXFIX Orthopedic implants & reconstruction systems for fracture management, joint reconstruction/ preservation,? sports medicine,?and deformity ...
Manufactured by:Waldemar Link GmbH & Co. KG based inGermany, GERMANY
High degree of joint stability and good kinematics; High primary stability; Natural joint reconstruction with physiological freedom of movement and functionality. Successful long-term clinical outcomes: 5 yrs 97.5%; 10 yrs 95.5%; Extended range of indications and comprehensive treatment options with intraoperative ...
Manufactured by:Bonegraft Biyolojik Malzemeler San. VE TIC. A.S. based inIZMIR, TURKEY
Bone Cement based on polymethyl methacrylate (PMMA) is a widely used biomaterial due to its ease of use in clinical practice and especially the long survival rate proven by dentures. Common Indications for Bone Cement: total joint replacement are bone and joint reconstructions, fracture fixation and treatment of osteoporotic vertebral fractures. ...
Manufactured by:Cerapedics, Inc. based inWestminster, COLORADO (USA)
i-FACTOR Bone Graft products are intended to replace or augment the use of autologous bone commonly utilized in spine, trauma, and orthopedic procedures such as: Spinal fusion incorporating interbody fusion devices; Treatment of non-union or traumatic fresh fractures; Joint reconstruction requiring a bone void filler. i-FACTOR Bone Graft products are sterilized ...
Manufactured by:Newclip Technics based inHaute Goulaine, FRANCE
The most common causes of these fractures are falls by osteoporotic elderly persons and high energy injuries or road accidents in younger patients. Intra-articular fractures require a stable joint reconstruction, which may be particularly complicated to achieve in elderly osteoporotic patients. Over the last few years double plate reduction (180° parallel or ...
Manufactured by:Mega Biopharma based inCrosne, FRANCE
Bone grafts, remedying loss of bone substance, bone reconstruction and bone fusion are being performed increasingly frequently in orthopaedic and traumatic surgery (vertebral fusion, vertebroplasty, joint reconstruction, traumatology, etc.). As a result, there is an increasing need for bone fillers. ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The self-drilling and self-tapping Merete® Cannulated PCS Screws are made of titanium alloy (Ti6AI4V, DIN EN ISO ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The self-tapping Merete® CS Screws are made of titanium alloy (Ti6AI4V, DIN EN ISO ...
Manufactured by:Merete Technologies, Inc. (MTI) based inOakbrook Terrace, ILLINOIS (USA)
The MetaCun™ II and DuoMetaCun™ II plates are osteosynthesis locking plates for dorsal fixation of mid and rearfoot arthrodesis procedures. Merete’s updated system utilizes a novel long-hole compression slot mechanism that compresses the fusion site through the displacement of bone fragments underneath the plate. A DIA 3.0 mm compression screw that glides along the ramp in the ...
Manufactured by:Bonovo Orthopedics, Inc. based inHaidian District, CHINA
The Konknow Artificial Hip System is available in general mode and bipolar mode. The collar design helps the patient to immobilize the joint early in the procedure and prevents the trunk from sinking. The surface is more designed with pearl surface and flutes to strengthen the fixation of cement (applying for permission from the State Food and Drug ...
Manufactured by:Tactile Orthopaedics based inCalgary, ALBERTA (CANADA)
Trial new equipment or novel techniques, between cases or after hours, anywhere. Replicate the mechanics of working with a patient's leg, open up the medial joint space for meniscal repair, or evaluate joint mechanics after ligament ...
Manufactured by:Tecomet, Inc. based inWilmington, MASSACHUSETTS (USA)
With unmatched design support and state-of-the-art forging, casting, and finishing capabilities, Tecomet is your end-to-end solution for high-precision femoral ...
Manufactured by:Tecomet, Inc. based inWilmington, MASSACHUSETTS (USA)
Tecomet is your partner for fully finished, tight tolerance tibial trays that are complete and ready for ...
Manufactured by:Good Medica Sp z o.o. based inWroclaw, POLAND
The device has an improved control system supported by a touch screen and a new precise drive system. OrtoFlex L2 is a motorized device designed for continuous passive mobilization of the knee and hip (CPM Continuous Passive Motion), it is a perfect complement to the improvement process under hospital conditions, as well as during independent rehabilitation at ...
Manufactured by:Tecomet, Inc. based inWilmington, MASSACHUSETTS (USA)
Tecomet is your partner for fully finished, tight tolerance femoral heads that are complete and ready for ...
Manufactured by:Tecomet, Inc. based inWilmington, MASSACHUSETTS (USA)
Our advanced capabilities in ultra-high-molecular-weight (UHMWPE) polyethylene help orthopedic manufacturers continue to innovate with patellar components that set new standards for ...
Manufactured by:Tecomet, Inc. based inWilmington, MASSACHUSETTS (USA)
With unmatched design support and state-of-the-art forging, casting, and finishing capabilities, Tecomet is your end-to-end solution for high-precision stems and ...