Refine by
Liquid Injection Equipment & Supplies
31 equipment items found
Manufactured by:Lindor Products B.V. based inDordrecht, NETHERLANDS
Liquid Injection for distributing a liquid homogeneously throughout the product is used in about 30% of our industrial mixers. ...
by:ARS Technologies Inc. based inNew Brunswick, NEW JERSEY (USA)
Atomized Liquid Injection (ALI) is a very effective method for injecting liquids and slurries uniformly within all types of geology. In addition, the injection radius of influence is considerably greater than what is achievable using conventional hydraulic injection. ALI relies upon the premise ...
Manufactured by:MSP Corporation based inShoreview, MINNESOTA (USA)
MSP offers several high performance vaporizers, which are referred to as performance-enhanced vaporizers, or PE vaporizers. The available models include the model 2800PE, 2820PE, 2830PE and 2840PE. These PE vaporizers make use of a precision piezo-valve to control the rate of liquid flow into an atomizer to form very fine droplets for vaporization, leading to reduced thermal decomposition and ...
Manufactured by:MSP Corporation based inShoreview, MINNESOTA (USA)
MSP offers several high performance vaporizers, which are referred to as performance-enhanced vaporizers, or PE vaporizers. The available models include the model 2800PE and 2840PE. These PE vaporizers make use of a precision piezo-valve to control the rate of liquid flow into an atomizer to form very fine droplets for vaporization, leading to reduced thermal decomposition and by-products ...
Manufactured by:aquila biolabs GmbH based inBaesweiler, GERMANY
LIS is the first easy to use technology for automated feeding of liquids in shake flasks. It consists of three components: a sterile single-use Cartridge, the Drive and the LIS Software. Fill the cartridge with up to 25ml of any type of liquid, define your feeding profile and install the cartridge and drive on the flask. The Software allows you to create complex feeding profiles as well as to ...
Manufactured by:CKL Machinery (M) Sdn Bhd based inPuchong, MALAYSIA
The Inline HSM 25 SLIS is specially designed to disperse solid powder mainly gum such as CMC, Carbopol and Carbomel as well as to emulsify oil and water phases in ...
Manufactured by:Jiangsu Grit Medical Technology Co., Ltd. based inChangzhou City, CHINA
The handle has a liquid injection port to facilitate the injection of contrast agent. The handle is ergonomically designed and can be operated with one hand. With high flexibility and flexible operation, it is conducive to the extraction and release of stones. ...
Manufactured by:Medarchitect based in, CHINA
Suitable for skin suturing and SubQ injection practice. The liquid injected into the sponge layer can be squeezed out after ...
Manufactured by:Freudenberg Medical based inCarpinteria, CALIFORNIA (USA)
Materials: all medical-grade silicone from NuSil, Dow Corning, Momentive, Wacker, Blue Star, and Shin-etsu. Low- to high-volume liquid injection molding (LIM), transfer/compression molding, micro-molding, insert molding, over-molding. Two-shot silicone injection molding. Experts in short- and long-term implantable silicones (LSR and HCR). ...
Manufactured by:Akums Drugs & Pharmaceuticals Ltd based inNew Delhi, INDIA
Being CDMO, Akums aims to support its Business partners by having a combined strategy of backward & forward integration. The purpose is to give a robust Risk mitigation plan for our associates/partners so that products keep moving consistently in the market in addition to introduction of new therapy areas / segments. Akums is pleased to announce its new acquisition, a subsidiary of Akums ...
Manufactured by:Labthink Instruments Co.,Ltd based inJinan, CHINA
B2260 WVTR Test Dish Tightening Device is an auxiliary device to permeabilitytesting instruments, for tightening the test dishes in water vapor transmissionrate tests of films, sheets and similar materials used in food, medicine,medical devices, daily chemical, photovoltaic, electronic and many otherindustries. ...
Manufactured by:Medarchitect based in, CHINA
Training Pad Model with 3 Skin Layers Injection Simulator Practice Tool for Medical Students, Nurses, Doctors & Educational Suppliers. The intramuscular injection training pad consists of skin, subcutaneous tissue, and muscle layer. Great for SubQ and IM ...
Manufactured by:Nipro Europe Group Companies based inMechelen, BELGIUM
Nipro’s dental needles are designed for accuracy and comfort in dental treatments. An ultra-sharp needle minimizes patient discomfort during the injection of liquid anesthetics, while the needle’s high-break resistance allows it to be bent for access to hard to reach places. A marking on the hub indicates the bevel position for an even more precise ...
Manufactured by:Credence MedSystems, Inc. based inMenlo Park, CALIFORNIA (USA)
The Multi-Site™ Syringe was designed for applications requiring multiple controlled and precise injections within the same procedure. Multi-Site is suited for cosmetic and therapeutic applications with fillers and ...
Manufactured by:Xmed S.r.l. based inMirandola (MO), ITALY
The uterine manipulator is designed for the mobilisation of the uterus in the pelvic floor during laparoscopic surgical ...
Manufactured by:Credence MedSystems, Inc. based inMenlo Park, CALIFORNIA (USA)
The Multi-Site™ Syringe was designed for applications requiring multiple controlled and precise injections within the same procedure. Multi-Site is suited for cosmetic and therapeutic applications with fillers and ...
Manufactured by:Puritech Filtration (Wuhan) Co., Ltd based inWuhan City, CHINA
Puritech Labpure Glass Vial is made of soda lime glass, USP type II which meets the YBB00032002 standard of China Food and Drug Administration and commonly used as injection liquid container. With fired at 1600 ℃ , Labpure vial has the characteristics of smoothness, easy disinfection, corrosion resistance, wear resistance, dimensional stability, excellent ...
Manufactured by:Lindor Products B.V. based inDordrecht, NETHERLANDS
Lindor pharmaceutical blenders have proven to be a highly valuable part in the processing of a number of pharmaceutical products. The fact that the Lindor industrial mixers exercise virtually no shear forces make them particularly suitable for use with fragile and/or heat sensitive products. A typical example for pharma products is the post blending of agglomerated products with additives. Also ...
Manufactured by:Injecta Inc based inGunpo-si, SOUTH KOREA
DOUJET L&F Types consists of powder and liquid to be bone cement based on radiopaque polymethyl methacrylate and to contain aminoglycoside antibiotic gentamicin. At polymerization after mixing, you can fasten not only implant but also artificial hip joint as well as artificial knee joint for skeletal reinforcement of ...
Manufactured by:Terumo Neuro - MicroVention, Inc. based inAliso Viejo, CALIFORNIA (USA)
The Scepter balloon offers VERSATILITY with clinical applications in four key areas: Balloon Remodeling, Stent Delivery, Liquid Embolic Injection, and Balloon-Test ...