Lower Limbs Equipment
-
Manufactured by Dessintey | Parc Technologique Metrotechbased in FRANCE
Action preparation quickly altered in patients. Upper limb rehabilitation calls for an understanding of the individual components of the movement: Action planning: Potential of actions – Intention & motor planification. Motor execution: Performance of movement and biofeedback. For many patients, this first phase of action ...
-
Manufactured by Gogoa Mobility Robotsbased in SPAIN
HANK is a lower limb exoskeleton for rehabilitation of patients with spinal cord injury, neurodegenerative diseases or have suffered cerebrovascular accidents (stroke). This solution is made up of 6 motorized joints that allow functional recovery of gait and personal ...
-
Manufactured by Gogoa Mobility Robotsbased in SPAIN
The HANK lower limb exoskeleton achieves a constant gait pattern that does not exist in traditional ...
-
Manufactured by Longest - Guangzhou Longest Science & Technology Co., Ltd.based in CHINA
LGT-5100D is an advanced rehab exercise bike for the active and passive movement of upper and lower limbs. It is an effective at-home rehab exercise bike for those suffering from neurological and mobility conditions, and you can train your body while sitting yourself in a wheelchair. Unlike traditional stationary bikes that must be ...
-
Manufactured by Citieffe S.r.l.based in ITALY
Intramedullary nailing system for all lower limb indicated for the treatment of diaphyseal, supra-condylar femoral fractures, diaphyseal tibial fractures, corrective osteotomies, pseudoarthrosis, non-unions and mal-unions and tibiotalocalcaneal arthrodesis. The unique design of Estremo nail allows simplified suprapatellar and parapatellar ...
-
Manufactured by Intrauma S.p.a.based in ITALY
The PFF Modular Hook for the proximal femur provides all the stability features of the O’nil system and, if necessary, also offers the possibility of assembling the modular GT hook to stabilize the greater trochanter. The patented conical locking system is important to achieve angular stability in osteoporotic bones, where the grip of the screws may be compromised. Rather than using the ...
-
Manufactured by Intrauma S.p.a.based in ITALY
Swivelling clamps allow to adjust pins’ direction. Compression and distraction unit allows fragments reduction. Ø3mm swivelling threaded pins. Guide sleeves for temporary ...
-
Manufactured by K.K. Prosthetic & Orthopaedic Equipment Sdn. Bhd.based in MALAYSIA
FOOT: Wide range of foot that can fulfill the needs of Dorsi-Flexion, Plantar-Flexion, Inversion & Eversion., KNEE: Variety selection of knee joint, some comes with Safety Lock, Hydraulic, and Rotatable which suitable for praying., SOCKET: 3 most popular socket selection, Fiber Material Lamination Socket (Silicone), Polypropylene Plastic (Suction or Silicone), Double Layered Polypropylene ...
-
Manufactured by Intrauma S.p.a.based in ITALY
The Kit provides high quality single-use implants and instruments designed to improve the efficiency of your operating theater. It is streamlined to promote procedural efficiency by simplifying the management of instruments and implants during the surgical procedure. The innovative instrumentation is single-use and allows you to maintain the same surgical routine you perform ...
-
Manufactured by K.K. Prosthetic & Orthopaedic Equipment Sdn. Bhd.based in MALAYSIA
FOOT: Wide range of foot that can fulfill the needs of Dorsi-Flexion, Plantar-Flexion, Inversion & Eversion. SOCKET: 3 most popular socket selection, Fiber Material Lamination Socket (Silicone), Polypropylene Plastic (Suction or Silicone), Double Layered Polypropylene Plastic ...
-
Manufactured by Intrauma S.p.a.based in ITALY
Bridge fixation with angular stability plates is the most widely used method in the treatment of metadiaphyseal and periarticular fractures of the long bones of the lower limb. Delayed union, pseudo-arthrosis, breakage of fixation devices and asymmetrical bone callus formation are often caused by the rigidity of the implants, which do not ...
-
Manufactured by Intrauma S.p.a.based in ITALY
The O’nil Kyte system allows a perfect reduction of the lateral malleolus and includes plates of 3 different lengths. The elliptical hole in the diaphyseal area allows fibular malleolus syndesmosis using a standard screw. The unique conical screw-plate locking mechanism ensures fracture stability whist avoiding pressure on the bone, preserving vascularity and accelerating the return of the ...
-
Manufactured by Intrauma S.p.a.based in ITALY
The PFF Modular Hook for treating proximal fractures of the femur provides the usual excellent stability of O’nil locking plates, but with the additional option of securing the Greater Trochanter using a modular Greater Trochanter hook. The patented conical screw locking system creates a stable system in osteoporotic bones, when screw security can be compromised. In this system the screws ...
-
Manufactured by Rimec S.R.L.based in ITALY
Fisiotek 3000 G model uses flexion-extension movement to allow mobilisation of the knee and hip. The movement of the device is based on the correct adjustment of the length of the patient’s femur, which is necessary for the positioning of the limb. The device is light-weight, only 9.5 kg, to ensure the greatest manoeuvrability during ...
-
Manufactured by Rimec S.R.L.based in ITALY
Fisiotek 3000 E model uses flexion-extension movement to allow mobilisation of the knee and hip. The movement of the device is based on the correct adjustment of the length of the patient’s femur, which is necessary for the positioning of the limb. The device is light-weight, only 9.5 kg, to ensure the greatest manoeuvrability during ...
-
Manufactured by Rimec S.R.L.based in ITALY
and knee joints, and for the ankle joint. The asymmetric frame structure permits anatomically correct movement: placement is made according to the patient’s limb length, measured from the greater trochanter to the lateral malleolus. Limbs with a length between 72 cm and 100 cm can be rehabilitated: moreover, the availability of a special ...
-
Manufactured by Rimec S.R.L.based in ITALY
Fisiotek 3000 N model uses flexion-extension movement to allow mobilisation of the knee and hip. The asymmetric frame structure permits anatomically correct movement: placement is made according to the patient’s limb length, measured from the greater trochanter to the lateral malleolus. Additionally, an accessory for limbs less than 72 ...
-
Manufactured by Rimec S.R.L.based in ITALY
. Limbs with a length relative to the patient’s femur from 32 cm to 49 cm can be ...
-
Manufactured by Triamedbased in ROMANIA
It is used in the crick, luxation, post-fracture, inflammatory processes, after the removal of the orthopedic plaster cast. ...
-
Manufactured by Triamedbased in ROMANIA
It is made of textiles, provided with 2 fastening straps. The heel area is open. Hook and loop fastener on the backside. Height: 20 cm. The orthosis is a support for the ankle and it assures the stability for the user. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you