Refine by
Medical Cellulose Equipment & Supplies
94 equipment items found
Manufactured by:Sterimed based inCoulommiers, FRANCE
Ethypel Performance SP 63 gsm is a medical cellulose-based overall coated top web solution designed to provide a controlled and consistent sealing performance for optimized peel ability requirements when combined to films made of a PE seal layer (PA/PE ; PP/PE ; PET/PE, etc.). ...
Manufactured by:Novadip Biosciences based inMont-Saint-Guibert, BELGIUM
3D Tissue Engineered Constructs / AUTOLOGOUS PRODUCTS For critical size tissue reconstruction: Active local delivery – ...
Distributed by:Network Medical Products Ltd. based inRipon, UNITED KINGDOM
The EYETEC high quality and performance Cellulose Eye Spears and Points for the management of fluids during ophthalmic ...
Manufactured by:Advanced BioMatrix, Inc. based inCarlsbad, CALIFORNIA (USA)
SpongeCol® is a type I collagen sponge with an interpenetrating, columnar pore architecture. SpongeCol® provides an increased surface area for cell attachment, growth and migration for tissue engineering ...
Manufactured by:mimiX Biotherapeutics based inBiel/Bienne, SWITZERLAND
ZAVA is a chemically defined, synthetic hydrogel that allows you to exploit the full potential of SIM – long term patterning, gelation upon demand, and biologically active sites. The hydrogel is photosensitive and crosslinks upon irradiation at 405 nm. MMP-cleavable sites and RGD peptides allow for potential cell spreading and migration and promote cell adhesion. ...
Manufactured by:Caldera Medical based inWestlake Village, CALIFORNIA (USA)
Bidirectional adjustability. Anchor anti-rotation mechanism. Anchor fully integrated with mesh with high pull-out force. One handed anchor release ...
Manufactured by:ONY Biotech based inAmherst, NEW YORK (USA)
ONY Biotech is partnering with a start-up company formed by faculty in Chemical and Bioengineering at the University at Buffalo to develop acellular tissue engineered vessels (ATEV). Once implanted, the ATEV evolves over a few weeks into an anatomically and physiologically normal blood vessel populated by the recipient’s own cells. This technology may offer new options for vascular ...
Manufactured by:Sterimed based inCoulommiers, FRANCE
Ethypel Performance CP 55 gsm is a medical light weight cellulose-based overall coated top web solution designed to provide enhanced runnability for optimized productivity level when combined to non-formable PET/PE films. Ethypel Performance CP 55 gsm is made of a 52 gsm cohesive base sheeting coated with a water-based 3 gsm adhesive layer providing excellent ...
Manufactured by:Becton Dickinson and Company (BD) based inFranklin Lakes, NEW JERSEY (USA)
Nonwoven textile products made from TephaFLEX® material are being developed with a highly porous structure to promote cellular ingrowth and allow tissue remodeling for tissue engineering and regenerative medicine ...
Manufactured by:mimiX Biotherapeutics based inBiel/Bienne, SWITZERLAND
KYTO is a chemically defined, synthetic hydrogel that bears biologically active sites. An MMP-cleavable crosslinker allows for potential cell spreading and migration. The hydrogel can be customised to bear a cell adhesive peptide, RGD, to further fine-tune the properties for specific applications. KYTO increases in viscosity after 8 to 10 minutes, enabling a dense and well-defined cell pattern to ...
by:Cellbricks based inBerlin, GERMANY
HUMAN TISSUE IS COMPLEX - SO IS THE CHALLENGE TO BIOFABRICATE IT. The building blocks of life consist of highly specialized cells and a complex extracellular matrix… … organized in highly structured micro-units… that together, perform the vital functions of a living organism. ...
Manufactured by:CorMatrix, Inc. based inRoswell, GEORGIA (US) (USA)
CorTM TRICUSPID ECM valve is an investigational device and not commercially available. The CorTM TRICUSPID ECM valve is a cell free, extracellular matrix, tissue engineered valve for the tricuspid valve position. Unlike any other valve the CorTM TRICUSPID valve is a stentless cylindrical seamless valve that provides ventricular continuity and normal motion of the valve annulus. This normal ...
Manufactured by:Regenhu based inVillaz-St-Pierre, SWITZERLAND
The 3d bioprinting station in a biosafety enclosure: bringing the future of tissue engineering and regenerative medicine closer by revolutionizing medicine ...
Manufactured by:Allevi, Inc. based inPhiladelphia, PENNSYLVANIA (USA)
Bioinks are natural or synthetic biomaterials that mimic the extracellular matrix (ECM) to support the adhesion, proliferation, and differentiation of living cells. These materials give cells important cues they need to live, grow, and create functional 3D ...
Manufactured by:Bezwada Biomedical LLC based inHillsborough, NEW JERSEY (USA)
Polyoxaester development is based on aliphatic diacids possessing oxygen atoms adjacent to their α-carbons. These diacids are then polymerized in conjunction with a diol by means of a polycondensation reaction. Since organic chemists have used the term ‘oxa’ to designate the replacement of an ethylene group by an oxygen atom, these diacids have been called oxadiacids, and the ...
Manufactured by:SunP Biotech based inCherry Hill, NEW JERSEY (USA)
ALPHA-BP ™ 11 is a multi-nozzle 3D bioprinter for tissue engineering scaffolds. Its Low-Temperature Deposition Manufacturing technique allows 3d printing of personalized tissue scaffolds within a subzero environment. This subzero environment is fully controlled to as low as -30 degrees Celsius. The unique manufacturing technology integrates the freeze-drying method to achieve both ...
Manufactured by:Advanced Solutions Life Sciences based inLouisville, KENTUCKY (USA)
BioAssemblyBot 500 provides the next level of environmental control over the biofabrication process. The six-axis robotic arm and the collection of tools make BAB500 a unique offering for tissue engineering. With it being housed in a biosafety cabinet to ensure a sterile environment, life scientists will have further control over all parameters in their ...
by:Gelatex Technologies based inTallinn, ESTONIA
Gelacell™ is a non-woven highly porous scaffold specially designed for in vitro 3D cell culture and tissue engineering. It has a unique nanofibrous structure that closely mimics the natural extracellular matrix. Designed as a non-woven, highly porous scaffold, Gelacell™ offers exceptional biocompatibility and non-toxicity across a variety of cell types. Gelacell™ is produced using patented ...
Manufactured by:Cure Biotech Co., Ltd. based inCheongju-si, SOUTH KOREA
PLCL is a copolymer of high purity of L-Lactide and ε-caprolactone. It has good processability, is safe for the human body, and is used in medical device fields associated with tissue engineering and scaffolds. It is a good material for heart, skin, and vascular tissue regeneration with slow degradation and high elongation rates. ...
Manufactured by:AvantBio Corporation based inLynnwood, WASHINGTON (USA)
HKSdaFREE + HKGE: AvantBio introduces an improved, 2-component, defined animal origin-free cell culture supplement system for primary human epidermal keratinocytes and other epithelial cells, including human corneal epithelial cells and human oral epithelial cells. Cell culture and tissue engineering in the complete absence of animal- and human-derived ...