Open Heart Equipment
-
Manufactured by SPICTRAbased in INDIA
Cardiotomy Reservoir has a holding capacity of 2 litres. It is disposable and used in open-heart surgery. It filters cardiotomy blood at 37 microns. The defoaming process performed right at the entry point minimizes ...
-
Manufactured by Zimmer Biomet CMF and Thoracicbased in USA
SternaLock Blu is specifically designed by cardiothoracic surgeons for primary sternal closure following median sternotomies for open-heart procedures. Zimmer Biomet has nearly two decades of clinical experience. Explore the legacy studies and whitepapers of our primary closure ...
-
Manufactured by Zimmer Biomet CMF and Thoracicbased in USA
An innovative, sternal closure system designed to approximate, compress and rigidly fixate the sternum following open-heart surgery in patients with poor bone ...
-
Manufactured by Remington Medical Inc.based in USA
Disposable screw-down extension cable with Remington Safety Separator for temporary pacing of open hearts. The FL-601-97 Fas-Loc accepts epicardial pacing wires at one end and plugs into a Medtronic 5348 or 5388 EPG or older EPG with an adapter (Medtronic 5101 or Remington ADAP I ...
-
Manufactured by Edwards Lifesciences Corporationbased in USA
Builds upon the proven strengths of the SAPIEN valve with 5 years of durability. The SAPIEN 3 valve is the only valve approved for valve-in-valve procedures in both the aortic and mitral positions, allowing patients at high or greater surgical risk to avoid an additional open heart ...
-
Manufactured by SPICTRAbased in INDIA
The Cardioplegia Delivery System with reservoir capacity of 2 litres is disposable and is used in open-heart surgeries. It offers myocardial protection through warm/cold chemicals mixed with or without oxygenated blood in a unique “Helical -Counter Current down flow” ...
-
Manufactured by Valcare Medicalbased in ISRAEL
AMEND mitral repair implant is an innovative D-shaped ring with unique anchoring capabilities that emulates the current gold-standard annuloplasty rings used in open-heart surgery. It is delivered into the mitral annulus in a transcatheter transeptal procedure. The implant emerges from the catheter in a linear form and transforms into a closed ...
-
Manufactured by Relisys Medical Devices Limitedbased in INDIA
Transcatheter Bicaval Valves System is a boon for all those patients who cannot be operated through open-heart procedure because of any reason. TricValve® Transcatheter Bicaval Valves is a system of two self-expanding biological valves for the treatment of patients with hemodynamically relevant tricuspid insufficiency and caval ...
-
Manufactured by Jarvik Heart, Inc.based in USA
be coordinated with inflow and outflow valves. Total artificial hearts therefore require a great deal of complexity and precision. Early artificial hearts such as the Jarvik 7 were air-driven and relied on heavy machinery outside the body, similar to today’s heart-lung machines that sustain patients during ...
-
Manufactured by Kapp Surgical Instrument Inc.based in USA
for anticoagulation should a-fib develop. Ease of use – placed in ideal location at the base of the LA appendage during routine open heart surgery without adding significantly to length of operation – applied in under five minutes. One piece construction of a surgically approved metal alloy. Atraumatic design without teeth to eliminate bleeding. ...
-
Manufactured by P+F Products + Features GMBHbased in AUSTRIA
The Vienna Aortic Self-Expandable Transcatheter Valve is designed to treat severe aortic stenosis in patients at medium to high risk for open heart surgery. The minimally invasive heart valve replaces the native valve without the need for concomitant surgical removal and is placed throught femoral access. The new generation device comes ...
-
Manufactured by Newmedical Technology Inc.based in USA
2" x 8" silicone strips fill the need for a strip bigger than our 1" x 6" strips and shorter than our 2" x 24" abdominal strip. Designed for scars 7" or less, including those resulting from mastectomy, open heart surgery, hysterectomy, knee replacement surgery, and spine ...
-
Manufactured by APC Cardiovascular Ltd.based in UNITED KINGDOM
Myo-Pace heart wires are a range of myocardial heart wires designed specifically for use as a temporary cardiac pacing wire after open heart surgery. The polyethylene insulation provides the smooth surface necessary to minimise tissue trauma both on placing and withdrawal of the heart wire, whilst the ...
-
Manufactured by Abiomedbased in USA
The Impella RP heart pump provides temporary, circulatory support for patients who develop right heart failure. It is the only FDA-approved heart pump indicated for patients experiencing acute right heart failure or decompensation following left ventricular assist device implantation, myocardial infraction, heart ...
-
Manufactured by Relisys Medical Devices Limitedbased in INDIA
The VIENNA AORTIC VALVE SE self-expandable transcatheter valve is designed to treat severe Aortic stenosis in patients at medium to high risk for open heart surgery. The minimal invasive heart valve replaces the native valve without the need for concomitant surgical removal and is placed via the femoral access. The new generation device ...
-
Manufactured by NaviGate Cardiac Structures, Inc., (NCSI)based in USA
insufficiency without the need for conventional, open-heart ...
-
Manufactured by Abiomedbased in USA
The Impella 5.5 with SmartAssist heart pump delivers full cardiac support, allowing the heart to rest and enabling the heart to achieve its natural pumping function without additional support. This heart pump is designed for long-duration support, enables patient mobility and optimizes recovery by using real-time ...
-
Manufactured by Springboardbased in USA
Surgical Device Component Manufacturer; Although Springboard does not make any finished medical devices, we are an industry-leading surgical device component manufacturer. We supply a sizeable number of injection-molded surgical components that go into life-saving surgical devices. At Stack, we understand that our parts are used in devices that can save lives, and that the failure of insert ...
-
Manufactured by Puzzle Medical Devices Inc.based in CANADA
Puzzle Medical is a Canadian company specializing in the development of a minimally invasive long-term hemodynamic transcatheter pump. Puzzle Medical enables mechanical hemodynamic support to increase accessibility, improve patient quality of life and reduce the global economic burden related to the ...
-
Manufactured by Quest Medical Inc.based in USA
Technology so unique, Quest Medical was awarded eight U.S. patents for this perfusion system. At the heart of the MPS®2 system are Spline-Piston pumps coupled with state-of-the-art pressure sensors enabling unparalleled drug delivery accuracy. The Quest MPS 2 System provides independent control of potassium and carioprotective drugs, ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you