Stent Coating Equipment & Supplies
35 equipment items found
Manufactured by:Seleon GmbH based inHeilbronn, GERMANY
Several steps can be completed in one with the device. The protective cap is removed from the stent with the operation of the lever, and at the same time, the drug is applied and dried with sterile ...
Manufactured by:Becton Dickinson and Company (BD) based inFranklin Lakes, NEW JERSEY (USA)
Tepha is developing fully absorbable stents and coatings made from TephaFLEX® material. This could allow for local drug elution while leaving no permanent residual polymer, which might address the issue of late stent thrombosis with current DESs. In addition, Tepha is developing fully absorbable polymer stents containing ...
Manufactured by:Sonaer USA based inMelville, NEW YORK (USA)
SONO-CELL ® Medical Stent Thin Film Coating System with specialized stent arbor. All system components are compatible with the typical solvents and polymers used in stent coating. For example: solvents THF, acetone, DMAC, toluene, chloroform; polymers: urethanes, polycarbonates, silicones, styrenes. Touch ...
Manufactured by:Translumina GmbH based inHechingen, GERMANY
The Translumina Yukon Choice PC drug-eluting stent, coated with Rapamycin (Sirolimus) and the biodegradable component polylactide (PLA), has an excellent history of pre-clinical and long-term clinical ...
Manufactured by:Biosensors International Group, Ltd. based inSingapore, SINGAPORE
Low Late Loss: 9 month in stent late loss 0.13mm6. In Stent late loss in LEADERS = ...
Manufactured by:TaeWoong Medical based inGyeonggi-do, SOUTH KOREA
There are 4 different types for managing tracheobronchial obstruction. ...
Manufactured by:LimFlow, Inc. based inSan Jose, CALIFORNIA (USA)
Novel electrospun PTFE-covered nitinol Extension Stents are designed to maximize outflow to the foot by keeping valves in the calf open, while blocking smaller veins from taking flow back to the ...
Manufactured by:Relisys Medical Devices Limited based inRanga Reddy, INDIA
Highlighting Features: • Complete endothelialization is in 14 days • Lesser strut width hence results in minimal injury • Very low restenosis because of extremely smooth stent surface (mirror finish) • Cobal+C supports complete coverage of struts by neointima • Endothelial monolayer is fully functional – characterized by CD31 / PECAM, thrombomodulin expression • Thin struts ...
Manufactured by:Elixir Medical Corporation based inMilpitas, CALIFORNIA (USA)
The DESyne X2 Novolimus Eluting Coronary Stent System is a low-profile DES with high flexibility and exceptional deliverability. The ultra-thin design of its stent and polymer coating, with no primer coating, results in one of the thinnest coated struts ...
Manufactured by:MICRO-TECH (Nanjing) Co., Ltd, based inNanjing, CHINA
The highly varied selection of self-expanding stents for the respiratory tracts offers you the right solution for every indication. All in all, different diameters of 14 and 16mm in addition to different lengths of between 40 to 60 mm are available. Spherical ends in addition to the high radial force of the stent ensure a firm hold and minimise migration ...
Manufactured by:pfm Medical Ag based inCologne, GERMANY
The CP Stent is composed of 0.013“ Platinum/Iridium wire that is arranged in a “zig” pattern, laser welded at each joint and over brazed with 24K Gold. It allows expansion from 12 mm to 30 mm. The Covered CP Stent™ is comprised of the Bare CP Stent that is covered with an expandable sleeve of ...
Manufactured by:Biosensors International Group, Ltd. based inSingapore, SINGAPORE
At least 20% of PCI patients are High Bleeding Risk (HBR) where there is a need to avoid prolonged dual antiplatelet therapy (DAPT).1-9 .The BioFreedomTM Drug-Coated Stent (DCS) is significantly safer and significantly more efficacious than a BMS in High Bleeding Risk patients, with a DAPT regime of only one month, the shortest DAPT regime mandated for all ...
Manufactured by:OrbusNeich Medical Company Ltd. based inShatin, N.T., CHINA
Focused Force Angioplasty for Non-Compliant Lesion ...
Manufactured by:Medinol based inTel Aviv, ISRAEL
From crimping through delivery through calcified lesions, expansion and drug elution, drug-eluting stents endure substantial mechanical and chemical stress. Inherently brittle, traditional polymer coatings of drug eluting stents have been shown to develop surface imperfections and deformations, which under stress can crack and even peel away from ...
Manufactured by:Concept Medical Inc. based inTampa, FLORIDA (USA)
Conversion of Sirolimus drug into sub-micron sized particles; Nanocarriers created by encapsulation of sub-micron sized Sirolimus drug into highly biocompatible drug Carrier-phospholipid; Encapsulated Sirolimus is coated on stent and parts of balloon; Upon implantation of Abluminus NP at target site, Nanocarriers with Sirolimus drug from stent ...
Manufactured by:Aran Biomedical Teoranta based inSpiddal, IRELAND
Aran Biomedical offers PTFE stent encapsulation services for balloon and self-expanding stents. The company has significant expertise covering even the most challenging stent geometries, including conical and flared stents, double flared stents, and even stents featuring integrated electrical components. Stent covering wall thickness can be as low as 40 micron (0.0016″), ensuring minimum ...
Manufactured by:Becton Dickinson and Company (BD) based inFranklin Lakes, NEW JERSEY (USA)
The TephaFLEX polymer is a semicrystalline material with a melting point of approximately 60°C and is suitable for processing by all methods used for thermoplastic polymers. The most experience gained to date has been in the production of fibers through conventional melt spinning processes. Both monofilament and multifilament materials have been produced. These fibers can then be further ...
Manufactured by:Bezwada Biomedical LLC based inHillsborough, NEW JERSEY (USA)
Synthetic absorbable polymers derived from natural amino acids have excellent engineering properties, tunable hydrolysis profiles, and are able to release safe and biocompatible molecules and amino acids upon absorption at the site of action in a controlled manner. We are pleased to offer a portfolio of amino acids functionalized with safe and biocompatible molecules such as lactic and glycolic ...
Manufactured by:Sotera Health based inBroadview Heights, OHIO (USA)
Based on a gas diffusion process, Ethylene Oxide (EO or ETO) is capable of sterilizing and rendering products free of viable microorganisms. Sterility occurs when an EO gas molecule reacts with and destroys the microbial DNA. The process requires the simultaneous control of four variables, but interdependent parameters: gas concentration, temperature, relative humidity, and time of exposure. EO ...
Manufactured by:Relisys Medical Devices Limited based inRanga Reddy, INDIA
Highlighting Features: • Premier+ is an improved version of our first indigenously developed Sirolimus Eluting Coronary Stent System • Premier+ is with unique open and closed cell stent design on L 605 Cobalt Chromium stent platform with strut locking mechanism. This offers excellent radial strength and minimum recoil • The strut thickness for ...