Thrombectomy Equipment
-
based in IRELAND
The Vetex Medical ReVene® Thrombectomy Catheter has been engineered with a patented dynamic cage technology that enables the predictable removal of wall adherent thrombus in a single session without the need for ...
-
Manufactured by Mermaid Medical Groupbased in DENMARK
The D*Clot HD is a fully disposable system that is ready to use. No assembly required. It is indicated for mechanical declotting of AV dialysis fistulae and ...
-
Manufactured by Penumbra, Inc.based in USA
The Penumbra System is a fully-integrated system designed specifically for mechanical thrombectomy. It is intended for use in the revascularization of patients with acute ischemic stroke secondary to intracranial large vessel ...
-
Manufactured by Walk Vascular, LLC.based in USA
The JETi AIO Peripheral Thrombectomy System is intended to remove/aspirate fluid and break-up soft emboli and thrombus from the peripheral vasculature and to sub selectively infuse/deliver diagnostics or therapeutics with or without vessel ...
-
Manufactured by ISO Medbased in FRANCE
ISOMed Thrombectomy Catheters - single lumen are made with X.R.O. polyurethane. They are colour coded for easy identification. The specially designed latex balloon, fixed with two sutures, is perfectly symmetrical. Thrombectomy catheters are gradated every 10 cm from the distal end, and are re-inforced with a removable steel wire. The ...
-
Manufactured by Penumbra, Inc.based in USA
Penumbra’s Indigo Aspiration System can be used to remove emboli and thrombi from vessels of the peripheral arterial and venous systems, and for treatment of pulmonary embolism. A minimally-invasive device, Indigo enables the restoration of blood flow in such cases as acute limb ischemia and venous thrombus. The Indigo System utilizes the Penumbra ENGINE® aspiration source capable of ...
-
Manufactured by Inari Medicalbased in USA
The FlowTriever is an over-the-wire system designed to: Remove clot through both mechanical and aspiration mechanisms of action, Capture and Remove large clot burden from big vessels, Treat in a single session, Eliminate the need for thrombolytics, Eliminate ICU ...
-
Manufactured by Penumbra, Inc.based in USA
Penumbra’s ACE Reperfusion Catheters (ACE68 and ACE60) are intended for use in the revascularization of patients with acute ischemic stroke secondary to large vessel occlusion. The ACE catheter design further increases the distal and proximal lumen sizes, providing optimal trackability and even greater aspiration power. ACE68 is designed to easily navigate tortuous vessels to facilitate ...
-
Manufactured by Penumbra, Inc.based in USA
The Penumbra JET™ D Reperfusion Catheter is intended for use in the revascularization of patients with acute ischemic stroke secondary to large vessel occlusion. The Penumbra JET D is designed to navigate smaller, distal vessels and extract clot efficiently with the power of the Penumbra ENGINE™ aspiration ...
-
Manufactured by Penumbra, Inc.based in USA
The Penumbra JET 7 Reperfusion Catheter is intended for use in the revascularization of patients with acute ischemic stroke secondary to large vessel occlusion. The larger lumen of Penumbra JET 7, powered by Penumbra ENGINE®, is designed to increase thrombus removal force. The Penumbra JET 7 allows for the combined use with the 3D Revascularization Device™, which offers four ...
-
Manufactured by MicroVention, Inc.based in USA
The SOFIA Plus Catheter is designed for aspiration thrombectomy and offers an ideal combination of excellent distal trackability and a large 0.070" lumen to help with rapid recanalization of the affected ...
-
Manufactured by Inari Medicalbased in USA
Enabling Bloodless Thrombectomy for Pulmonary Embolism. The FlowSaver™ is designed to be used with the FlowTriever System to reduce blood loss by filtering aspirated thrombi and blood for reinfusion back to the patient, thus enabling bloodless thrombectomy for pulmonary embolism (PE) procedures. The FlowSaver is compatible with ...
-
Manufactured by AccuPath Medical Technologies Co., Ltd.based in CHINA
Medical nickel-titanium parts include conventional stents, valve stents, thrombectomy stents, close-mesh structural parts, and other parts. Medical push rods include (springs, tubes, and mandrels) welding structural push rods, spiral cutting structural push rods, and other parts. All these parts are widely used in various medical ...
-
Manufactured by ABCDxbased in SWITZERLAND
by mechanical thrombectomy, the mechanical removal of the thrombus operated with a ...
-
Manufactured by AccuPath Medical Technologies Co., Ltd.based in CHINA
Hypo tubes can be used in the following processes and devices: Conveyor for PTCA (percutaneous transluminal coronary angioplasty), Specialty catheters, atherectomy, thrombectomy, Embolic protection & filter devices, Intravascular imaging devices, Endoscopic steering and biopsy ...
-
Manufactured by AccuPath Medical Technologies Co., Ltd.based in CHINA
Hypo tubes can be used in the following processes and devices: Conveyor for PTCA (percutaneous transluminal coronary angioplasty), Specialty catheters, atherectomy, thrombectomy, Embolic protection & filter devices, Intravascular imaging devices, Endoscopic steering and biopsy ...
-
Manufactured by Intra Special Catheters GmbHbased in GERMANY
and ductal debries intraoperatively. The flush catheter (without balloon) is designed for irrigation after successful embolectomy, thrombectomy or ...
-
Manufactured by Medtronicbased in USA
The React™ 68 catheter and the React™ 71 catheter feature a coil and braid design along with end-to-end nitinol construction — easing navigation to the M1 and M2 segments. Combined with the Riptide™ aspiration system, these catheters are designed to revascularize patients experiencing acute ischemic ...
-
Manufactured by Q`Apel Medical Inc.based in USA
I’m a balloon guide catheter specifically designed for stroke patients. Before I came along, balloon-based variable stiffness catheters weren’t used all that often, because all manner of technological constraints stood in the way. I’m here to change that. My particular specifications are unique in this space—which means I’m ideally positioned to serve stroke ...
-
Manufactured by BIOMODEXbased in USA
Ischemic Stroke Cartridges, Multi-Use Type I/II/III Aortic Arches based on patient 3D rotational angiography, Right Femoral and Right & Left Radial Access, THROMBOTECH™ Hydrogel Synthetic Clot, Hard, Medium and Soft Textures, Lightweight, portable, plug-and-play station. BIOMODEX® EVIAS™ Plus is an ischemic stroke training and education solution designed for practicing ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you