Refine by
Traumatology Equipment & Supplies
70 equipment items found
Manufactured by:RUDISCHHAUSER Surgical Instruments Manufacturing GmbH based inTuttlingen, GERMANY
From minor to major fragments, plate screws, K-wires. Developed according to customer specification and manufactured to the highest quality on the latest generation of machines. ...
Manufactured by:RUDISCHHAUSER Surgical Instruments Manufacturing GmbH based inTuttlingen, GERMANY
Traumatology is a complex area with a broad indication spectrum ranging from repositioning to fixation. We develop and manufacture instruments that perfectly suit your needs. ...
Manufactured by:Kune Implants based inNigrán Pontevedra, SPAIN
Custom implants perfectly adjusted to the patient´s anatomy. Design and location of fixations according to pre-surgical planning. This is guided towards the best-quality bone areas. We offer hydroxyapatite coatings to stimulate ...
Manufactured by:Medindustria Service Ltd. based inMinsk Region, BELARUS
Set KPP-02 is a basic set for ortho-traumatological surgeries on lower limbs. Attention! Set KPP-02 is applied to operation tables ??din ?lpha (?U-01?), OK-Beta (?U?-02), ??-Delta, ??-Delta-Plus, OK-Beta Plus (?U?-02-1), ??-Sigma for treatment that implies tension and osteosynthesis of upper / lower limbs. ...
Manufactured by:Subiton | Laboratorios SL S.A. based inSan Fernando, ARGENTINA
ANTIBIOTIC COATED INTRA-MEDULLARY NAIL. Subiton Nail endomedular nail (Pat Pend) is used in infected or high risk patients with diaphyseal fractures in long bones. It is reinforced with a metal core coated with a layer of cement with antibiotic that aids in the treatment of the infection. Subiton Nail is a ready to use, premolded, temporary product. Subiton Nail is implanted with Subiton Nail ...
Manufactured by:Ortho-Medical GmbH based inDuerbheim, GERMANY
Implants for locking humeral nailing. System of implants: Material: titanium alloy Locking humeral nail, cannulated, diameter 7 - 8 - 9 mm. Locking screw, diameter 3,9 mm, End cup, Surgical set for locking humeral ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
C-NAIL is intramedullary nail for minimal-invasive fixation of intraarticular calcaneal fractures. The principle is to stabilize fragments of the fractured calcaneus using the nail with up to seven interlocking screws which create angularly stable fixation. The maximum of stability is achieved by fixing the sustentacular fragment towards the nail with two interlocking screws guided by a very ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Plates fixate fractures of short bones or long (tub) bones, they are for corrections and bone stabilisation. Fixation of the plate on the bone is performed with the help of bone screws. Reconstruction plates have lengthwise holes with spherical or conical surface of contact for screw ...
Manufactured by:Ortho-Medical GmbH based inDuerbheim, GERMANY
The polyaxial locking volar distal radius plate provides a versatile fixing option for the treatment of wrist fractures. The plates‘ design warrants anatomical fitting. Our portfolio includes two plate forms; the first is a generally well-established form with a design to cover the most common fracture zone of the distal radius. It is distributed in three sizes: normal, medium, and small to ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Elastic nails are used for elastic stable intramedullar osteosynthesis that is indicated for treatment of diaphysial and metaphysical children ...
Manufactured by:Ortho-Medical GmbH based inDuerbheim, GERMANY
ORLOS_II LOckING PLATE SYSTEM 4,5 - 5.0 MM • Angular stable • Locking or compression • Support biological osteosynthesis in case of osteoporotic bone and multiple fractures • Excessive torque is not applied to the cortical bone • Self-tapping locking screws • The bonefragments are are reliably fi xed in the position assumend at the time the screws are locked • ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Plates fixate fractures of short bones or long (tub) bones, they are for corrections and bone stabilisation. Fixation of the plate on the bone is performed with the help of bone ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Humeral nail enables osteosynthesis of humeral bone. The nail can be introduced retrogradly or antegradly. Many possibilities of locking enable good fixation even for short distal or proximal fragments. Humeral nail is determined for treatment of: stabile or unstable broken parts pathological fractures of psudoarthrosis. ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Pelvic plates are flexible plates determined for fixations of pelvis bone fractures, mainly in the area of acetabula, but also other pelvis fractures such as pubis symphysis, back vertical hip bones and in the area close to sacral ...
Manufactured by:ORTOLOG MEDICAL based inYenimahalle – Ankara, TURKEY
Ortholox® UHMWPE Cerclage Band System is manufactured from Medical Degree Ultra High Molecular Weight Polyethylene material. For Ortholox® UHMWPE Cerclage Band System, very thin fibers are woven in the form of bands with a width of 5 mm and 6 mm to form a multifilament ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Soft bone wires for osteosynthesis using cerclage tension. The diameters of 0.25 to 2.0 mm. Length 10 m. ...
Manufactured by:Medin, a.s. based inNove Mesto na Morave, CZECH REPUBLIC
Kirschner wires and K-wires are used to make bone fragments stationary and stabilized during fracture treatment, elongation of limbs, skeletal fixation, inner ostheosynthesis, osteotomy, arthrodesis, correction of deformities, revision procedures where other methods do not work, as guide elements to reach inner traction of bone fragments, guidance of instruments during hole pre-drilling and ...
Manufactured by:ORTOLOG MEDICAL based inYenimahalle – Ankara, TURKEY
Ortholox® Locking Periprosthetic Support Proximal Femur Cable-Plates have coaxial combi-holes and have 4 to 16-hole options. In the shaft part, they are used with 4.5mm locking head screws, 4.5mm cortical screws and 5.0mm periprosthetic locking screws. In the proximal part, they are used with 5.0mm locking cortex screws, 5.0mm cannulated locking cortex screws and 6.5mm cannulated locking ...
Manufactured by:ORTOLOG MEDICAL based inYenimahalle – Ankara, TURKEY
Ortholox® Locking Periprosthetic Attachment Plates have a round hole structure and have 2 to 8-hole options. They are used with 3.5mm locking head screws and 3.5mm periprosthetic locking screws. They can be attached to Ortholox® Locking Periprosthetic Support Cable-Plate Systems via a connection screw and inner screw compatible with 4.5mm screw holes. In cases where plates used for ...
Manufactured by:ORTOLOG MEDICAL based inYenimahalle – Ankara, TURKEY
Ortholox® Locking Periprosthetic Support Trochanter Femur Hook Cable-Plates have coaxial combi-holes and have 2 to 16-hole options. They are used with 4.5mm locking head screws, 4.5mm cortical screws and 5.0mm periprosthetic locking screws. The structure of the holes is also compatible with 5.0mm Insert screws, Plate-Band Button Implant and Locking Attachment Plate connection screws. They can ...