Refine by
Uterine Cavity Equipment & Supplies
17 equipment items found
Manufactured by:GTA S.r.l. based inQuistello, ITALY
Hysterosalpingography Catheter. HYSCA facilitates injection of contrast media into the uterine cavity ...
Distributed by:Multi-G B.V. based inAntwerpen (Anvers), BELGIUM
The efficiency of the procedure is maximum thanks in particular to the suction on the cervix which prevents any flow of the contrast medium, as well as an optimal distribution of the contrast medium throughout the uterine cavity. The sliding Rigister variant has a sliding element for an even more precise adjustment of the cannula. It also allows the contrast ...
Manufactured by:Minerva Surgical, Inc. based inSanta Clara, CALIFORNIA (USA)
Continuous visualization gives you the ability to see and treat the uterine cavity during the entire procedure. The simple setup and compact design ensures quick case turn around. ...
Manufactured by:Gyn Surgical Solutions based inMarlborough, MASSACHUSETTS (USA)
MyoSure LITE device: Visualize the entire uterine cavity to get a quality tissue specimen; remove small polyps up to 3 cm with minimal ...
Manufactured by:JUNE Medical USA Inc based inNew Castle, DELAWARE (USA)
Wing Needle For Hysteroscopic Intrauterine Anaesthesia helps to reduce the pain associated with distension and / or manipulation of the uterine cavity during hysteroscopic gynaecology ...
Manufactured by:Femasys Inc. based inSuwanee, GEORGIA (US) (USA)
FemVue is the first FDA-cleared product that creates natural saline and air contrast and enables safe, reliable, and real time evaluation of the fallopian tubes with ultrasound. When performed with a uterine cavity assessment, a more comprehensive exam can be achieved from the comfort of the GYN’s ...
Manufactured by:JUNE Medical USA Inc based inNew Castle, DELAWARE (USA)
Flowable gel that is intended to serve as a temporary, absorbable mechanical barrier separating surgically traumatized opposing tissue surfaces in the uterine cavity where adhesions could potentially ...
Manufactured by:Gyn Surgical Solutions based inMarlborough, MASSACHUSETTS (USA)
It uses controlled radiofrequency energy, heat, to cause coagulative necrosis of the fibroid tissue. The treated tissue softens and shrinks over time, allowing fibroid symptoms to resolve with no suturing of the uterine tissue. Unlike many alternative interventions, the Acessa procedure optimizes imaging of the uterus by simultaneously displaying the laparoscopic camera view and ...
Manufactured by:AEGEA Medical Inc. based inMenlo Park, CALIFORNIA (USA)
The Mara Water Vapor Ablation System is redefining endometrial ablation. By gently filling the uterine cavity with naturally expansive water vapor, Mara treats more women with varying uterine anatomies*, does not require general anesthesia, and most importantly, safely and effectively reduces heavy menstrual bleeding. *Cavity ...
Manufactured by:SMB Corporation Of India based inMumbai, INDIA
The Insertion Tube is equipped with a movable flange to aid in gauging the depth to which the Insertion Tube should be inserted through the cervical canal and into the uterine cavity. Centimeter Scale printed in blue is provided on the Insertion Tube for exact positioning of the flange on the Insertion Tube before Insertion. It is 99% effective Intrauterine ...
Manufactured by:Mona Lisa N.V. based inHerk-de-Stad, BELGIUM
This model is an improved rebuilt of the former, no more available “GyneT” with a new technology for quick and safe loading of the IUD. The classic T-shaped IUD is the most common used IUD-model in the world, recommended even by the WHO. With a copper surface of 380 mm² it shows the lowest pearl index among all copper ...
Manufactured by:Minerva Surgical, Inc. based inSanta Clara, CALIFORNIA (USA)
Experience a modern device that delivers complete and consistent depth of coverage, without using RF energy only to ablate endometrial ...
Manufactured by:LiNA Medical ApS. based inGlostrup, DENMARK
UNA Librata™ Endometrial Ablation Simplified; -2 minute thermal treatment time, Slim 5.4 mm catheter requires minimal or no dilation, Ideally suited for ambulatory gynecology, Only a simple sounding measurement ...
Manufactured by:SMB Corporation Of India based inMumbai, INDIA
Each SMB Cu 375 frame is made from compound of Low Density Polyethylene and Barium Sulphate (15% -24%) with two flexible arms with spurs. 99.99% purity OFE Copper wire (Diameter 0.40 mm ± 0.01 mm) is wound around the stem, giving a total copper surface area of 375mm2 ± 20mm2. The 'Frame' is equipped with Polyamide Monofilament(Suture)for checking the presence/position and easy ...
Manufactured by:SMB Corporation Of India based inMumbai, INDIA
Each SMB Cu 250 frame is made from compound of Low Density Polyethylene and Barium Sulphate(15% - 24%) with two flexible arms with spurs. 99-99% purity OFE Copper wire (Diameter 0.30 mm ± 0-01 mm) is wound around the stem, giving a total copper surface area of 250mm; ±20mm2. The 'Frame' is equipped with Polyamide Monofilament (Suture) for checking the presence/position of IUD and ...
Manufactured by:SMB Corporation Of India based inMumbai, INDIA
Each Y shaped SMB TCu 380Ag frame is made from compound of Low Density Polyethylene and Barium Sulphate (15% - 24%) wound with 0.40mm diameter copper wire with silver core of 0.1mm providing a surface area of 380mm2 ± 23mm2. The Y frame is equipped with Polyamide Monofilament thread (suture)for easy removal. It is packed together with an Insertion Tube and Rod in a Tyvek-Mylar film pouch ...
Manufactured by:Femasys Inc. based inSuwanee, GEORGIA (US) (USA)
FemBloc features our proprietary delivery platform, which places balloon technology close to the opening of both fallopian tubes. This in-office approach is designed to eliminate the risks of incisions, anesthesia, and hormones. As a nonsurgical procedure that is implant free, FemBloc delivers a biopolymer that is expected to expel within 3 months. Confirmation of procedure success can be ...