Vertebroplasty Equipment
-
Manufactured by Zetagen Therapeutics Inc.based in USA
ZetaMet Settable is being designed for the treatment of patients with metastatic lesions that have or will result in a Skeletal-Related Event, (SRE) including fractures and spinal cord ...
-
Manufactured by Medax Srlbased in ITALY
VERTEBROX needle is used in Vertebroplasty procedures to inject cement into the vertebral body. ...
-
Manufactured by Injecta Incbased in SOUTH KOREA
SPINOFILL is a radiopaque, low-viscosity bone cement for filling and stabilizing vertebral bodies. It is obtained by mixing a polymer powder component with a liquid monomer component. After mixing, a low-viscosity dough is obtained which is filled into the vertebral bodies as a stabilization medium and allowed to ...
-
Manufactured by Synimedbased in FRANCE
APV Synicem Vertebroplasty System is used to apply any cement intended specifically to be applied in vertebroplasty. APV Synicem Vertebroplasty System is presented in a case that contains instructions for use and a double blister with the system sterilized with ethylene ...
-
Manufactured by Teknimedbased in FRANCE
OPACITY+® is a self-curing and ready to use low viscosity bone cement with a very high content of radiopaque agent for a perfect and safety visualization. Its composition has been optimized to get the most suitable handling properties for vertebroplasty & kyphoplasty. ...
-
Manufactured by Ormed Group Medicalbased in TURKEY
OGM VTP is acrylic based radiopaque bone cement with PMMA content. It is indicated for the stabilization and strengthening of a fractured, collapsed or compressed vertebral body caused by pathological conditions such as osteoporotic or tumors. It also has a low degree of reaction to minimize exothermic damage to bone or other tissues. It has high visibility with its high radiopaque content. ...
-
Manufactured by Teknimedbased in FRANCE
F20® radiopaque bone cement is a ready to use, medium viscosity, low exothermic, self-curing bone cement with a high content of radiopaque agent for a perfect level of visualization and safety required during percutaneous vertebral bone augmentation procedures. Its composition has been optimized to get the most suitable handling properties for surgeon’s convenience. F20® comes as an ...
-
Manufactured by ADRIA MEDICAL S.R.Lbased in ITALY
Vertebroplasty trocar set with bone biopsy needle. Small handle ...
-
Manufactured by Teknimedbased in FRANCE
SPINE FIX® is a ready to use bone cement with a high amount of radiopaque agent for vertebroplasty, kyphoplasty & pedicular screw injection procedures. SPINE FIX® allows an excellent consolidation of the vertebral boby with an effective and rapid pain relief. The handling times of SPINE FIX® have been specifically developed to ...
-
Manufactured by Subiton | Laboratorios SL S.A.based in ARGENTINA
CEMENT APPLICATION SYSTEM FOR ...
-
Manufactured by Mega Biopharmabased in FRANCE
Product / Use: injectable bone substitute for vertebroplasty and kyphoplasty. Key properties: osteogenic, homeostatic, biocompatible, bioabsorbable, radiopaque, no volume reduction, no exothermic reaction. ...
-
Manufactured by Medical Positioning, Inc. (MPI)based in USA
MPI’s GSPM™ Table is the ideal surgical C-arm table for pain management procedures, such as vertebroplasty or kyphoplasty, which require oblique imaging. The GSPM™ Table expedites procedure time by properly positioning the patient to facilitate contrast transfer during procedures such as myelograms. This C-arm operating ...
-
Manufactured by Mega Biopharmabased in FRANCE
Bone grafts, remedying loss of bone substance, bone reconstruction and bone fusion are being performed increasingly frequently in orthopaedic and traumatic surgery (vertebral fusion, vertebroplasty, joint reconstruction, traumatology, etc.). As a result, there is an increasing need for bone fillers. The ageing population and obesity are ...
-
Manufactured by Zetagen Therapeutics Inc.based in USA
ZetaSet is the first synthetic, osteo-inductive, biologic designed specifically for the treatment of osteoporotic fractures, high energy injuries with bone defects, and for patients with fractures of the tibial plateau (knee) and plafond ...
-
Manufactured by EOS MEDICAL SOLUTIONS (EOSMED)based in BULGARIA
Biongraft Bone Cement, based on polymethyl methacrylate (PMMA) . A widely used biomaterial due to its ease of use in clinical practice and especially the long survival rate proven by ...
-
Manufactured by medical bees GmbHbased in GERMANY
MCC Retractor: Optimal Exposure. Retractors and blades TiAlN coated with black finish. Made in ...
-
Manufactured by medical bees GmbHbased in GERMANY
Spine Retractor and Distraction Set for anterior cervical fusion (ACF) and lumbar retraction (MCC): Complete set available in trayOptimal exposure; Color-coded blades with depth marking for ease of use together with colored depth gauge. All set components to be stored securely in specially designed trays with coated surface to protect instruments; Retractors stainless steel and blades out of ...
-
Manufactured by medical bees GmbHbased in GERMANY
Double-hinged retractor for optimal positioning of the spreader. Joints hold in position. Blades are easily connected via snap-lock. Blades 360° rotatable, hook with fixation pin. Simple, easily movable adaptation of blades using two different types of blade connectors. To be used for lumbar and thoracic spinal procedures. Blade connectors with quick coupling or screw are available for the ...
-
Manufactured by medical bees GmbHbased in GERMANY
Lumbar retractor system. Side load for optimal exposure. Blades out of titanium, color-coded, radiolucent. Large variety of valves and ...
-
Manufactured by Mizuho OSIbased in USA
A reliable, efficient and versatile table system. With over 8,000 units sold worldwide, the Modular Table System (MTS) delivers precise and stable positioning, with interchangeable tops for spine, imaging and orthopedic trauma procedures. Part of the original modular system, the Spinal Surgery Top offers the classic open frame design for posterior spinal surgery, while the Radiolucent Imaging Top ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you