FOFO - Mattress Overlay for Bed Sores
When preparing to inflate, the mattress should be flattened. After the mattress is filled with air, it can be used normally. Generally, the first inflating time is about 30 minutes. When inflating, firstly check whether the pressure of the air pump is adjusted to the maximum,whether the extended rubber tube of the mattress is cut with a pair of scissors, it is convenient to match the air pump outlet.
-
Most popular related searches
Medical air mattress with pump / Anti -bedsore / A...
Medical air mattress with pump / Anti -bedsore / Anti- decubitus
2.5”,5” ,8” cell
Our medical anti-decubitus mattress made of taiwan Nanya / Dingzing(PVC/ TPU), One-time moulding for bubble type mattress. Offer a variety of woundcare solutions for the treatment and healing of pressure ulcers. Give mattress warranty 12 months and compressor 18 months. Top quality aluminum compressor provide very silent and durable, big air output advantage.
New model with toilet hole for more practical use for disabilities.
CPR, strength/ PU cover, static pillow, laser holes, toilet hole replacement cell and repair kit are optional.
Specification
Pump
Item:HF608
Power supply: 110V/220V/50-60Hz
Air output: 5-7liter/min.
Pressure range: 50mmHg - 110 mmHg
Cycle time: 12 min.
Power consumption: 7 W
Fuse: 1A
Size: 23.5(L) x 12(W) x9.5 (H)cm
Weight: 1.4 kg
Pad
Item: HF6005
Size:200cm(L) x 90cm(W) x 7.0cm(H)
18 cells
end flaps,repair kit ,hose 1.5M
Material: medical class Taiwan Nanya TPU
PVC thickness: 0.3 mm
Color :blue
Mattress weight : 2.2-2.5kg
Weight Capacity: 135-145kg
About our mattress
About our mattress
- When preparing to inflate, the mattress should be flattened. After the mattress is filled with air, it can be used normally. Generally, the first inflating time is about 30 minutes.
- When inflating, firstly check whether the pressure of the air pump is adjusted to the maximum,whether the extended rubber tube of the mattress is cut with a pair of scissors, it is convenient to match the air pump outlet.
- Check that the air pipe joints under the mattress are all connected and kept inflated.
- Because the winter is cool, we can put a thin layer of tweezers on the mattress to keep the patient warm and make the patient more comfortable.
- Patients over 135KG cannot use this mattress.
- Pay attention to the pressure control when inflating, and do not exceed the maximum pressure to prevent the airbag from breaking through the pressure.
- Pay attention to keep the mattress clean and hygienic, often wash the surface with a neutral detergent, pay attention to acid and alkali.
- Note that there should be no sharp objects on the mattress and the surface of the sheet to prevent the mattress from being pierced.
- Be careful to keep it clean when using it. Store it in a dry and ventilated place when handling. Pay attention to moisture.
Pillow function
The cell of the heag positon won't be alternating , to provide the most comfortable for the patient
Alternating mode
The pump will be inflate and deflate for the cell with cylicity , to change the control position beteween the patient and the bed ,so that to promote the blood circulation to prevent the bedsore and recovery the bedsore, reduce the patient's pain and the nursing labor intensity.
Static mode
The system can be switched to a static mode with constant low pressure, to facilitate all kinds of nursing procedures including dressing changes.
Modular air cells , easy to change and clean.
Medical grade TPU material, environmentally friendly, waterproof, anti-bacterial,etc
Air ventilation hole design, bolwing by tiny holes, moisture control ,patient can feel more comfortable
High density sealed foam base provide more security, and can be vaccum save freight cost
Buckle fasten to bed more stable
Zipper all around cover easy maintenance and cleaning
Static mode
Customer reviews
No reviews were found for FOFO - Mattress Overlay for Bed Sores. Be the first to review!