Selectra - Model Pro S - Fully-Featured Compact Chemistry Systems
From Clinical Chemistry - Chemistry Systems
Fully-featured, compact system with enhanced performance. Throughput is up to 133 photometric tests/hour, plus optional dry ISE.
Product Details
The latest in the Selectra Pro series, the Selectra ProS is our most compact, fully featured system with enhanced performance and best-in-class operator interface. New system features enable significant enhancements, not typically found in BenchTop chemistry analyzers. Together with a superior menu of ready-to-use, liquid-stable reagents, the Selectra ProS provides a fully integrated chemistry solution for smaller or satellite laboratory locations. With random access and typical throughput up to 133 tests per hour, the Selectra ProS system is the ideal BenchTop workhorse for primary, STAT or back-up testing needs. This new system offers minimal maintenance and effective use of consumables to truly reduce operational cost.
- Fully-automated clinical chemistry analyzer
- Typically 133 photometric tests/hour, plus optional dry ISE
- Broad test menu
- Best-in-class operator interface
- Productivity and error reducing capabilities
- Automated reagent management
- Annual ProActive Maintenance Kit
Delivering trouble-free results laboratories can trust!
Specifications
Throughput
- Up to 133 tests/hou
- Up to 266 ISE tests/hour
Reagent and Sample System
- One rotor combining sample and reagent positions
- Inner rotor ring:
- 30 refrigerated reagent positions for 10 mL, 25 mL and 50 mL reagent bottles
- Cooled to 10°C +/- 4°C at normal laboratory conditions
- All reagent positions can be assigned as R1, R2 and R3.
- Outer rotor ring:
- 25 barcode readable positions
- All positions fit 13x75 mm primary and secondary tubes and pediatric cups
- All positions can be used for calibrators, controls, normal, pediatric and STAT samples.
Pipetting System
- R1 volume 110-400 µl
- 1000 µl reagent syringe:
- R2 volume 0-180 µl
- R3 volume 0-180 µl
- Programmable in 1 µl steps
- Sample volume 1-30 µl
- 100 µl sample syringe:
- Programmable in 0.1 µl steps
- Programmable dilution ratios 1:5 up to 1:100 in one step increments with 3 possible diluents
- Pre-heated probe with level detection, collision protection and integrated mixer.
Cuvette Rotor
- Cost effective, semi-disposable cuvette rotor with 48 cuvettes
- 10,000 tests per rotor
- Typical reagent consumption 250 µl per test
- Measurement temperature 37°C, controlled by Peltier elements.
Light Source
Quartz-iodine lamp 12V-20W.
Wavelength Range
- Optical unit with 8 position filter wheel
- 340, 405, 505, 546, 578, 620, 660, 700 nm standard wavelengths
- Other wavelengths available on request.
Photometric Range
- 0.1 to 3.0 Absorbance
- Resolution 0.001 Abs.
Analytical Modes (Single, Dual and Triple reagent system)
- Kinetic measurement with linearity check
- Mono- and bichromatic end point measurement with or without bichromatic reagent blank and/or sample blank correction
- Two point measurement; with or without slope blank
- Graphic plot of all measuring points
- Predilution and automatic reflex dilution as needed
- Non-linear calibration curves
- Prozone check for immunology tests
- Cut-off declaration
- Calculated tests.
Quality Control
- Up to 15 controls can be defined, 3 per test
- Westgard or Basic QC rules
- Levey-Jennings plots
- Quality control statistics.
Water Consumption
~950 mL per hour when fully operating.
Standards and Regulations
- CE-IVD
- CB
- Pending FDA clearance
- UL.
Dimensions
- 90 x 75 x 60 cm (W x H x D)
- 36 x 30 x 24 in (W x H x D)
- Weight: 75 kg (165 lbs).
Interface
- State of the art Host-Query interface available;
- Host: RS 232 or Ethernet (TCP/IP) through LIS-2A protocol.
Environmental Conditions
- Temperature: 15 – 32 °C (59 – 90 °F)
- Humidity: 15 – 85% RH
- Altitude: up to 2000 m
- Plumbing: No dedicated water or drain required
- Electrical:
- Voltage: 100 – 240 Vac
- Frequency: 50 – 60 Hz
- Power (max): 350 VA .
Integrated PC
- Touch screen navigation
- Operating system: Windows™ Embedded
Customer reviews
No reviews were found for Selectra - Model Pro S - Fully-Featured Compact Chemistry Systems. Be the first to review!