Silbermann - Model DIN 13260-2 Type - Medical Gas Outlets (Terminal Units)
From Medical Gas Pipeline Equipment - Medical Gas Outlets
We design and manufacture our Medical Gas Outlets (Terminal Units) to last and to ensure a constant and reliable medical gas flow for the patient and the medical equipment. All outlets are 100 % tested for flow, leakage and are cleaned for oxygen services prior to shipping. Our outlets are designed by industrial designers to ensure an appealing and pleasant environment for the patient and the medical staff.
Features:
Accepts DIN 13260-2 gas specific adapters.
- All medical gas outlets are 100% hydrostatic tested for leaks.
- The outlets are factory assembled, degreased and cleaned for medical gas service.
- Indexed to eliminate interchangeability of gas services.
- 360 deg swivel inlet pipe for ease of installation.
- Double position allowing parking of male adapter in the outlet.
- Low maintenance due to use of VITON seals in front assembly (latch value).
- Medical Gas System Standards:
- NFPA99 & EN ISO 7396-1 requirements.
- Applicable Standards:
- ISO 9170-1, DIN 13260-2.
- Silbermann's Quality Management System:
- CE marked by the notiied body TÜV-SÜD.
Specifications:
- The medical gas outlet shall be SILBERMANN DIN type manufactured according to ISO 9170-1 DIN 13260-2.
- The outlet shall be gas speciic by indexing each front service panel to a gas speciic pin indexed rough-in module.
- The outlet of positive and negative pressure shall consist of a primary and secondary check valves to allow testing and on-line maintenance.
- Outlet shall be manufactured with 175 mm long, type K, 12.7 mm (1/2”) OD copper pipe.
- Rough-in pipe shall be silver brazed to the outlet body.
- With the rough-in mounted, the outlet shall be depth adjustable to compensate for various wall thicknesses.
- The quick connect outlet shall comply with ISO 9170-1 standard type and accept only corresponding DIN 13260-2 Gas Speciic Adapter.
- Pressure drop of less than 20 Kpa through the outlet at 120 LPM and 350 Kpa (3.5 Bar) inlet pressure.
- When fully open, the outlet allows a low of up to 600LPM and pressure of 400 KPa (4 Bars).
Customer reviews
No reviews were found for Silbermann - Model DIN 13260-2 Type - Medical Gas Outlets (Terminal Units). Be the first to review!